AEG STEP 420 Handleiding

AEG Zaagmachine STEP 420

Lees hieronder de 📖 handleiding in het Nederlandse voor AEG STEP 420 (62 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/62
GB
D
F
I
E
P
NL
DK
S
FIN
ST 400
ST 440
STEP 420
STEP 450
SPE 70
SPE 80 A
Instructions for use
Please read and save these
instructions.
Gebrauchsanleitung
Bitte lesen und aufbewahren.
Instruction d’utilisation
Prière de lire et de conserver.
Istruzioni d’uso
Si prega di leggere le istruzioni e
di conservarle.
Instrucciones de uso
Lea y conserve estas
instrucciones por favor.
Instruções de serviço
Por favor leia e conserve em seu
poder.
Gebruiksaanwijzing
Lees en let goed op deze
adviezen.
Brugsanvisning
Vær venlight at læse og
opbevare.
Bruksanvisning
Var god läs och tag tillvara dessa
instruktioner.
Käyttöohje
Lue ja säilytö
15
0
B
A
III
II
I
0
1
ENGLISH ST 400, ST 440, STEP 420, STEP 450, SPE 70, SPE 80 A
You have high standards and expect to purchase quality goods – quality offered by
Atlas Copco. We have built a durable and reliable electric power tool for you.
Please read the instructions for use before first operation so you can handle your
power tool effectively and safely.
We are sure that buying an AEG Electric Power Tool from Atlas Copco was the
right choice!
ST 400 ST 440 STEP 420
Cutting depth max. in:
Soft– wood 60 mm 60 mm 65 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hard wood 50 mm 50 mm 55 mm–. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steel 3 mm 3 mm 5 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Aluminium 10 mm 10 mm 10 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nominal power 400 W 440 W 420 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight 1,6 kg 1,6 kg 1,7 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stroke rate under no-load 3000 min
-1 3000 min-1 450-3000 min-1
. . . . . . . . . .
Lengths of stroke 19 mm 19 mm 19 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bevel cuts up to 45o45o45o
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STEP 450 SPE 70 SPE 80 A
Cutting depth max. in:
Soft– wood 65 mm 70 mm 70 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hard wood 55 mm 60 mm 60 mm–. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Steel 5 mm 5 mm 5 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Aluminium 10 mm 10 mm 10 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Nominal power 450 W 500 W 500 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight 1,7 kg 1,7 kg 1,7 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stroke rate under no-load 450-3000 min
-1 450-3000 min-1 450-3000 min-1
. .
Lengths of stroke 19 mm 19 mm 19 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bevel cuts up to 45o45o45o
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JPlease pay attention to the safety instructions in the attached leaflet!
JDust that arises when working on material containing asbestos or stonework
containing crystalline silicic acid is harmful to the health. Please follow accident
prevention regulations.
JAppliances used at many different locations including open air must be connected
via a current surge preventing switch.
JAlways use the protective shields on the machine.
JAlways disconnect the plug from the socket before carrying out any work on the
machine.
JAlways wear goggles when using the machine. It is recommended to wear gloves,
sturdy non slipping shoes and apron.
JSawdust and splinters must not be removed while the machine is running.
JDo not pierce the motor housing as this could damage the double insulation (use
adhesives).
JKeep mains lead clear from working range of the machine. Always lead the cable
away behind you.
JOnly plug-in when machine is switched off.
JDust that arises when working on wood or using the tool on industrial material can be
dangerous to health. In this case connect the tool to a suitable suction device.
JDo not use cracked or distorted saw blades.
Typically the A-weighted sound pressure level of the tool is 82 dB (A).The noise
level when working can exceed 85 dB (A). Wear ear protectors!
Measured values determined according to EN 50 144.
Typically the weighted acceleration is 3 m/s
2.
Measured values determined according to EN 50 144.
This jig saw can cut wood, plastic and metal; it can cut straight lines, bevels, curves,
and internal cut-outs.
Do not use this product in another way as stated for normal use.
Introduction
Technical Data
Advice for your
safety
Measured sound
value
Measured
vibration value
Use
2
ENGLISH ST 400, ST 440, STEP 420, STEP 450, SPE 70, SPE 80 A
Connect only to a single-phase AC current supply and only to the mains voltage
specified on the rating plate. Connection to sockets without earth protection is
possible as the appliance features protective insulation to DIN 57 740/ VDE 0740
and CEE 20. Radio suppression complies with the European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is
connected to the plug terminal marked L or coloured red, and the blue (neutral) wire
of this appliance is connected to the plug terminal marked N or coloured black.
Under no circumstances must the wires of this appliance be connected to the earth
terminal of the plug marked either E, with the earth symbol or coloured green or
green/yellow.
Mains
connection
Brief description
15
0
B
A
III
II
I
0
Modifications: Text, diagrams and data are correct at the time of printing.
In the interest of continuous improvement of our products, technical
specifications are subject to alteration without prior notice.
The on-off switch can be fixed in the
” ”On - position for continuous operation
by means of the locking button.
The on-off switch is shaped in such a way that it can be
used from the forward or the rear holding position.
The sawdust blower removes sawdust
ahead of the cut – very practical when
sawing along a line.
Integrated suction channel for
connection to a
vacuum-cleaner.
The vibration damper permits quieter
running by means of a counterweight on the
plunger.
Transparent cover for
optimum sawdust
removal.
The stroke-rate (= movements per
minute of the saw blade) can be infinitely
varied by means of the adjustment
wheel.(not for ST 400, ST 440)
The anti-splintering device
almost entirely prevents the
edge of the wood from
splintering. (Accessory*)
The base plate can be tilted to both sides
by 45o for bevel cuts.
Integrated tool storage for spare
blade.
The built-in pendulum stroke improves the cutting
performance. The pendulum stroke of the saw blade
means it is only pressed against the material on the
reverse stroke (working stroke) and lifted off the
material on the forward stroke.
Result: better extraction of sawdust, lower friction
–> higher cutting performance.
The pendulum stroke can be adjusted by the
pendulum stroke control and thus adapted to different
kinds of material. (not for ST 400, ST 440)

Product specificaties

Merk: AEG
Categorie: Zaagmachine
Model: STEP 420

Heb je hulp nodig?

Als je hulp nodig hebt met AEG STEP 420 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Zaagmachine AEG

AEG

AEG BUS 18C2 Handleiding

21 Februari 2024
AEG

AEG STEP 900 X Handleiding

17 Juni 2023
AEG

AEG ACS18B30 Handleiding

15 Juni 2023
AEG

AEG STEP 570 X Handleiding

14 Juni 2023
AEG

AEG A18CHS14 Handleiding

13 Juni 2023
AEG

AEG BKS 18BL Handleiding

25 April 2023
AEG

AEG ST 400 Handleiding

18 April 2023
AEG

AEG STEP 450 Handleiding

12 April 2023
AEG

AEG STEP 420 Handleiding

11 April 2023
AEG

AEG USE 980 X Handleiding

5 April 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Ozito

Ozito PXBCS-1830 Handleiding

24 December 2024
Einhell

Einhell STP 500 E Handleiding

23 December 2024
Anova

Anova E60CS Handleiding

20 December 2024
Silverline

Silverline 447132 Handleiding

19 December 2024
Silverline

Silverline 427644 Handleiding

19 December 2024
Herkules

Herkules KS 210 Profi Handleiding

17 December 2024
Total

Total TS730301 Handleiding

16 December 2024
Total

Total TJSLI8501 Handleiding

16 December 2024
Turbo-Silent

Turbo-Silent EKS 2040/1 Handleiding

16 December 2024
Bavaria

Bavaria BJS 400 Handleiding

5 December 2024