AEG hk 46 n Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor AEG hk 46 n (52 pagina's) in de categorie Zaag. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/52
GB
D
F
I
E
P
NL
DK
S
FIN
HK 46 N
Instructions for use
Please read and save these
instructions.
Gebrauchsanleitung
Bitte lesen und aufbewahren.
Instruction d’utilisation
Prière de lire et de conserver.
Istruzioni d’uso
Si prega di leggere le istruzioni e
di conservarle.
Instrucciones de uso
Lea y conserve estas
instrucciones por favor.
Instruções de serviço
Por favor leia e conserve em seu
poder.
Gebruiksaanwijzing
Lees en let goed op deze
adviezen.
Brugsanvisning
Vær venlight at læse og
opbevare.
Bruksanvisning
Var god läs och tag tillvara dessa
instruktioner.
Käyttöohje
Lue ja säilytö
45
°
45
°
30
°
1
ENGLISH HK 46 N
You have high standards and expect to purchase quality goods – quality offered by
Atlas Copco.
We have built a durable and reliable electric power tool for you.
Please read the instructions for use before first operation so you can handle your
power tool effectively and safely.
We are sure that buying an AEG Electric Power Tool from Atlas Copco was the right
choice!
Nominal power 630 W. . . . . . . . . . . . . . . . . . . . .
No-load speed 4600 min-1
. . . . . . . . . . . . . . . . . . . .
Saw blade dia. x hole dia 152x20 mm. . . . . . . . .
Cutting depth at 90°46 mm. . . . . . . . . . . . . . . . . .
Cutting depth at 45°30 mm. . . . . . . . . . . . . . . . . .
Weight 2,6 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Please pay attention to the safety instructions in the attached leaflet!
Always disconnect the plug from the socket before carrying out any work on the
machine.
Always wear goggles when using the machine. It is recommended to wear gloves,
sturdy non slipping shoes and apron.
Sawdust and splinters must not be removed while the machine is running.
Before use check machine, cable, and plug for any damages or material fatigue.
Repairs should only be carried out by authorised Service Agents. Keep mains lead
clear from working range of the machine. Always lead the cable away behind you.
Do not pierce the motor housing as this could damage the double insulation (use
adhesives).
Dust that arises when working in wood or using the tool on industrial material can be
dangerous to health. In this case connect the tool to a suction device (e.g. Atlas
Copco absorbtion system AS 3 W).
Always use the protective shields on the machine.
Before switching on ensure that protective swing cover moves freely.
Mind safety regulations issued by your employer’s liability insurance association.
Do not use grinder on any material containing asbestos.
Protective cover operation only with the provided lever resp. automatically by the
workpiece.
When plunge cutting secure the workpiece against kickback (e.g. with cross bar).
Do not use saw blades not corresponding to the key data given in these instructions
for use.
Be careful not to saw into nails or similar objects.
The riving knife should be adjusted so that:
- the distance between it and the tips of the saw blade teeth does not exceed 5 mm
- it is not more than 5 mm away from the lowest point of the tips of the saw blade
teeth.
Do not use cracked or distorted saw blades or HSS saw blades (high speed steel).
The teeth thickness, or the set of the teeth must be thicker than the body of the
blade and the riving knife. Do not remove the riving knife (exception: plunge cutting).
Do not brake the speed of the saw-blade after switching off the motor by pressing
on it from the side.
Do not clamp the swivel protection guard.
Clamp wooden rods on both sides of the saw blade to prevent them from rotating.
Do not fix the on/off switch in the ”on” position when using the saw hand-held.
Typically the A-weighted noise levels of the tool are:
Sound pressure level = 94dB(A)Sound power level = 107dB(A). Wear ear
protectors!
Typically the hand-arm vibration is below 2.5 m/s
2
.
Introduction
Technical Data
Advice for your
safety
Measured sound
value
Measured
vibration value
2
ENGLISH HK 46 N
This electronic circular saw can cut lengthways and mitre accurately in wood,
plastic, and aluminium.
Connect only to a single-phase AC current supply and only to the mains voltage
specified on the rating plate. Connection to sockets without earth protection is
possible as the appliance features protective insulation to DIN 57 740/ VDE 0740
and CEE 20. Radio suppression complies with the European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is
connected to the plug terminal marked L or coloured red, and the blue (neutral) wire
of this appliance is connected to the plug terminal marked N or coloured black.
Under no circumstances must the wires of this appliance be connected to the earth
terminal of the plug marked either E, with the earth symbol or coloured green or
green/yellow.
Always disconnect the plug from the socket before carrying out any work on the
machine.
1. Swing the movable protective cover back
and hold it steady. Hold the work spindle
still by means of a wooden wedge
between the saw blade teeth and the
guide plate.
2. Unscrew the tension screw with the
hexagonal spanner. Remove the
washer and the spring washer .
3. Fit the new saw blade by following the
above steps in the reverse order.
The arrow on the saw-blade must point in the same direction as the direction of
rotation arrow.
Brief description
45
°
45
°
30
°
Modifications: Text, diagrams and data are correct at the time of
printing. In the interest of continuous improvement of our
products, technical specifications are subject to alteration without
prior notice.
Sawdust outlet
Cutting angle adjustment with cutting
angle scale.
Protective swing cover to protect the user
against injuries. When the machine is
applied to the working material the cover
swings back automatically.
Parallel guide with millimeter scale.
On-/off switch
Cutting depth adjustment with millimeter
scale.
Guide plate
Switch lock – prevents the machine from
being switched on accidentally.
Use
Mains
connection
Changing the
saw blade
45
°
45
°
30
°
321
Product specificaties
| Merk: | AEG |
| Categorie: | Zaag |
| Model: | hk 46 n |
Heb je hulp nodig?
Als je hulp nodig hebt met AEG hk 46 n stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zaag AEG
5 Augustus 2022
6 Augustus 2022
2 Maart 2022
6 Augustus 2022
3 Maart 2022
28 Juli 2022
5 Februari 2022
5 Augustus 2022
4 Februari 2022
Handleiding Zaag
- Zaag Bosch
- Zaag Panasonic
- Zaag DeWalt
- Zaag Batavia
- Zaag Dual Saw
- Zaag Einhell
- Zaag Elektra Beckum
- Zaag Elu
- Zaag Exakt
- Zaag Ferm
- Zaag Ferrex
- Zaag Festool
- Zaag Fleurelle
- Zaag Fuxtec
- Zaag Gamma
- Zaag Hikoki
- Zaag Kinzo
- Zaag Kress
- Zaag Lux Tools
- Zaag Makita
- Zaag Metabo
- Zaag Parkside
- Zaag Powerplus
- Zaag Protool
- Zaag Ryobi
- Zaag Scheppach
- Zaag Skil
- Zaag Toledo
- Zaag Triton
- Zaag Varo
- Zaag Vonroc
- Zaag Workzone
- Zaag Proxxon
- Zaag Dexter Power
- Zaag Graule
- Zaag Mac Allister
- Zaag Toolson
Nieuwste handleidingen voor Zaag
13 Oktober 2023
13 Oktober 2023
13 Oktober 2023
13 Oktober 2023
13 Oktober 2023
25 September 2023
25 September 2023
11 September 2023
11 September 2023
5 September 2023