AEG BBS1100 Handleiding

AEG Schuurmachine BBS1100

Lees hieronder de 📖 handleiding in het Nederlandse voor AEG BBS1100 (38 pagina's) in de categorie Schuurmachine. Deze handleiding was nuttig voor 69 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/38
GB
D
F
I
E
P
NL
DK
S
FIN
TR
RUS
BBS 1100
BBSE 1100
Instructions for use
Please read and save these
instructions.
Gebrauchsanleitung
Bitte lesen und aufbewahren.
Instruction d’utilisation
Prière de lire et de conserver.
Istruzioni d’uso
Si prega di leggere le istruzioni e
di conservarle.
Instrucciones de uso
Lea y conserve estas
instrucciones por favor.
Instruções de serviço
Por favor leia e conserve em seu
poder.
Gebruiksaanwijzing
Lees en let goed op deze
adviezen.
Brugsanvisning
Vær venlight at læse og
opbevare.
Bruksanvisning
Var god läs och tag tillvara dessa
instruktioner.
Käyttöohje
Lue ja säilytö
Kullanøm kølavuzu
Lütfen okuyun ve saklayin
Èíñòðóêöèÿ ïî
èñïîëüçîâàíèþ
Ïîæàëóéñòà, ïðî÷òèòå è
ñîõðàíèòå íàñòîÿùóþ
èíñòðóêöèþ
1
ENGLISH BBS 1100, BBSE 1100
You have high standards and expect to purchase quality goods – quality offered by
AEG.
We have built a durable and reliable electric power tool for you.
Please read the instructions for use before first operation so you can handle your
power tool effectively and safely.
We are sure that buying an AEG Electric Power Tool was the right choice!
BBS 1100 BBSE 1100
Nominal power 1100 W 1100 W. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Belt speed no load 400 m/min 230–400 m/min. . . . . . . . . . . . . . . . . . .
Sanding width 100 mm 100 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Belt length 560 mm 560 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sanding surface 100 x 140 mm 100 x 140 mm. . . . . . . . . . . . . . . . .
Weight 5,0 kg 5,0 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JPlease pay attention to the safety instructions in the attached leaflet!
JDust that arises when working in wood or using the tool on industrial material can be
dangerous to health. In this case connect the tool to a suction device.
JAppliances used at many different locations including open air must be connected
via a current surge preventing switch.
JAlways wear goggles when using the machine. It is recommended to wear gloves,
sturdy non slipping shoes and apron.
JSawdust and splinters must not be removed while the machine is running.
JDo not pierce the motor housing as this could damage the double insulation (use
adhesives).
JAlways disconnect the plug from the socket before carrying out any work on the
machine.
Only plug-in when machine is switched off.
JKeep mains lead clear from working range of the machine. Always lead the cable
away behind you.
JWhen sanding metal the dust suction facility should not be used, because of the risk
of fire from flying sparks.
Typically the A-weighted noise levels of the tool are:
Sound pressure level = 88 dB (A)
Sound power level = 101 dB (A).
Wear ear protectors! Measured values determined according to EN 50 144.
Typically the hand-arm vibration is below 2.5 m/s2.
Measured values determined according to EN 50 144.
Connect only to a single-phase AC current supply and only to the mains voltage
specified on the rating plate. Connection to sockets without earth protection is
possible as the appliance features protective insulation to DIN 57 740/ VDE 0740
and CEE 20. Radio suppression complies with the European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is
connected to the plug terminal marked L or coloured red, and the blue (neutral) wire
of this appliance is connected to the plug terminal marked N or coloured black.
Under no circumstances must the wires of this appliance be connected to the earth
terminal of the plug marked either E, with the earth symbol or coloured green or
green/yellow.
The belt sander can be used for sanding wood, plastics and metal.
Do not use this product in another way as stated for normal use.
Introduction
Technical Data
Advice for your
safety
Measured sound
value
Measured
vibration value
Mains
connection
Use
2
ENGLISH BBS 1100, BBSE 1100
Always disconnect the plug from the
socket before carrying out any work on the
machine.
Prior the changing belt, adjust sanding belt
by turning the belt adjusting screw approx.
2–3 cm in the direction of the open side of
the machine beyond the rollers, whilst the
machine is running, as the new sanding
belt can sometimes brush against the
machine housing.
1. Pull the clamping lever forwards
2. Remove the worn belt and fit the inside of
the belt is pointing in the same direction as
the arrow on the machine.
3. Push the clamping lever back again
4. Taking a test run, position the sanding belt
with the aid of the belt adjusting screw so
that it is flush with the outer edge of the
sanding belt support.
The speed is adjusted by means of the
electronic thumb wheel.
1 = lowest speed
6 = highest speed
Brief description
Modifications: Text, diagrams and data are correct
at the time of printing. In the interest of continuous
improvement of our products, technical
specifications are subject to alteration without prior
notice.
Integrated dust removal
Locking button
On-/off switch
Suction connector
Adjusting screw for
belt
Dust bag
Electronic thumb wheel (only applicable for BBSE 1100)
Changing the
belt
Setting speed of
rotation
(only applicable
for
BBSE 1100


Product specificaties

Merk: AEG
Categorie: Schuurmachine
Model: BBS1100

Heb je hulp nodig?

Als je hulp nodig hebt met AEG BBS1100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Schuurmachine AEG

Handleiding Schuurmachine

Nieuwste handleidingen voor Schuurmachine