Advantech WISE-2410-EB Handleiding

Advantech Niet gecategoriseerd WISE-2410-EB

Lees hieronder de 📖 handleiding in het Nederlandse voor Advantech WISE-2410-EB (50 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/50

User Manual

WISE-2410

LoRaWAN Smart Condition

Monitoring Sensor

WISE-2410 User Manual ii

The documentation and the software included with this product are copyrighted 2020

by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. also reserves the

right to improve the products described in this manual at any time without notice. No

part of this manual may be reproduced, copied, translated, or transmitted in any form

or by any means without the prior written permission of Advantech Co., Ltd. The

information provided in this manual is intended to be accurate and reliable. However,

Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements

of the rights of third parties that may result from its use.

Acknowledgments

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

Product Warranty (2 years)

Advantech warrants the original purchaser that each of its products will be free from

defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products that have been repaired or altered by

persons other than repair personnel authorized by Advantech, or products that have

been subject to misuse, abuse, accident, or improper installation. Advantech

assumes no liability under the terms of this warranty as a consequence of such

events.

Because of Advantech’s high quality-control standards and rigorous testing, most

customers never need to use our repair service. If an Advantech product is defective,

it will be repaired or replaced free of charge during the warranty period. For out-of-

warranty repairs, customers are billed according to the cost of replacement materials,

service time, and freight. Please consult your dealer for more details.

If you believe your product is defective, follow the steps outlined below:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note

anything abnormal and list any onscreen messages displayed when the prob-

lem occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain a return merchandize authori-

zation (RMA) number from your dealer. This allows us to process your return

more quickly.

4. Carefully pack the defective product, a completed Repair and Replacement

Order Card, and proof of the purchase date (such as a photocopy of your sales

receipt) into a shippable container. Products returned without a proof of pur-

chase date are not eligible for warranty service.

5. Write the RMA number clearly on the outside of the package and ship the pack-

age prepaid to your dealer.

Part No. 2003240000 Edition 1

Printed in Taiwan October 2020

iii WISE-2410 User Manual

Declaration of Conformity

Notice to OEM integrator

1. In the users manual of the end of product, the end user has to be informed to keep

at least 20cm separation with the antenna while this end product is installed and

operated.

2. The antenna(s) used for this transmitter must not be collocated or operating in con-

junction with any other antenna or transmitter within a host device, except in accor-

dance with FCC multi-transmitter product procedures.

3. Only those antennas with same type and lesser gain filed under this FCC ID num-

ber can be used with this device.

4. The regulatory label on the final system must include the statement: “Contains

FCC ID: M82-WISE2410” or using electronic labeling method as documented in KDB

784748.

5. The final system integrator must ensure there is no instruction provided in the user

manual or customer documentation indicating how to install or remove the transmitter

module except such device has implemented two-ways authentication between mod-

ule and the host system.

6. The final host manual shall include the following regulatory statement: This equip-

ment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy. If not installed and used in

accordance with the instructions, it may cause harmful interference to radio commu-

nications. However, there is no guarantee that interference will not occur in a particu-

lar installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by tuning the equipment off and on,

the user is encouraged to try and correct the interference by one or more of the fol-

lowing measures:

Reorient or relocate the receiving antenna.

Increase the distance between the equipment and the receiver.

Connect the equipment to outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-

lowing two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncon-

trolled environment. This equipment should be installed and operated with minimum

distance 20cm between the radiator & your body.

Product specificaties

Merk:	Advantech
Categorie:	Niet gecategoriseerd
Model:	WISE-2410-EB

Heb je hulp nodig?

Als je hulp nodig hebt met Advantech WISE-2410-EB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Advantech

Advantech HPC-8108 Handleiding

19 November 2024

Advantech HPC-7242 Handleiding

19 November 2024

Advantech HPC-8424 Handleiding

19 November 2024

Advantech HPC-7400 Handleiding

19 November 2024

Advantech HPC-8104 Handleiding

19 November 2024

Advantech HPC-7483 Handleiding

19 November 2024

Advantech HPC-8212 Handleiding

19 November 2024

Advantech IDAQ-784-A Handleiding

14 November 2024

Advantech IDAQ-817-AE Handleiding

14 November 2024

Advantech SOM-7533CCBC-S5A1 Handleiding

14 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Electrolux STA9 Handleiding

23 November 2024

Electrolux UMP3 Handleiding

23 November 2024

Electrolux ZS70GL Handleiding

23 November 2024

Bosch HEZ8TK36UC Handleiding

23 November 2024

Bosch HEZ8ZZ36UC Handleiding

23 November 2024

Bosch HDZIT301 Handleiding

23 November 2024

Bosch HEZBS301 Handleiding

23 November 2024

LG LX-330 Handleiding

23 November 2024

Stamos S-PLASMA 60U Handleiding

23 November 2024

Bosch KSZ2AVU00 Handleiding

22 November 2024