Advantech EKI-2706G-2FPI-A Handleiding

Advantech Schakelaar EKI-2706G-2FPI-A

Lees hieronder de 📖 handleiding in het Nederlandse voor Advantech EKI-2706G-2FPI-A (3 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/3
EKI-2706G Series Startup Manual 1
EKI-2706G-2FPI&EKI-2706G-2GPI
Industrial Unmanaged PoE Switch
Startup Manual
Speciîš¿cations
Overview
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
For technical support and service, please visit our
support website at:
http://www.advantech.com/support
This manual is for the EKI-2706G Series.
Part No. 2049270610
Printed in Taiwan
1st Edition
January 2024
General
• Compatibility: IEEE 802.3, 802.3u, 802.3z, 802.3ab,
802.3x, 802.3at/af
• LAN:
EKI-2706G-2FPI:
- 4 x 10/100/1000BASE-T/TX RJ-45 PoE Ports
- 2 x SFP (mini-GBIC) 100/1000Mbps port
EKI-2706G-2GPI:
- 4 x 10/100/1000BASE-T/TX RJ-45 PoE Ports
- 2 x 10/100/1000BASE-T/TX RJ-45 Ports
• Ethernet RJ-45: Up to 100 m
• SFP: Up to 110 Km (depends on SFP)
• Connectors:
- EKI-2706G-2FPI: 4 x RJ-45, 2 x SFP
- EKI-2706G-2GPI: 6 xRJ45
• Switch Architecture: Store and Forward
• Power Input: 12~48VDC, redundant power
• Power Consumption: Max 4.32W (system)
• Power Budget:
- 120W@24/48VDC
- 70W@12VDC
• Dimensions (W x H x D): 46 x 140 x 130 mm
• Enclosure: IP30
• Operating Temperature: -40 ~ 75°C (-40 ~ 167°F)
• Storage Temperature: -40 ~ 85°C (-40°F ~ 185°F)
• Operating Humidity: 5 ~ 95% (non-condensing)
• Storage Humidity: 5 ~ 95% (non-condensing)
• Safety: LVD EN62368
• EMC: FCC Class A, CE
• Warranty: 5 year
The EKI-2706G PoE switch is unmanaged Ethernet
switches supporting 4 ports PoE+ (Power over Ethernet)
and compliant with IEEE 802.3at/af standards. It provides
up to 30 watts of power per port and fulîš¿ll the power budget
of max.120 watts on system. The switch provides a relay
output for an event alarm which activates the alarm to notify
administrators. Robust design for harsh environment, din
rail mounting and fast startup with plug and work
The EKI-2706G supports IEEE 802.3/802.3u/802.3z/
802.3ab/802.3x with 10/100/1000 Mbps, full/half-duplex,
auto-negotiation and MDI/MDI-X auto-sensing to provide an
economical solution for your industrial Ethernet network.
Packing List
Before installation, please make sure that you have re-
ceived the following:
• 1 x EKI-2706G Ethernet Switch
• 1 x DlN-rail mounting brackets with screws
• 1 x EKI-2706G Startup Manual
If anything is missing or damaged, contact your distributor
or sales representative immediately.
User Manual
For more detailed information, please refer to the full
manual which can be found on the Advantech’s website.
2 EKI-2706G Series Startup Manual
EKI-2706G-2FPI EKI-2706G-2GPI
EKI-2525/I
LED Deîš¿nition
EKI-2706G-2FPI
LED Color Description
P1 Green
On PWR1 is being supplied to
power input.
O󰀨 PWR1 is not being supplied
to power input.
P2 Green
On PWR2 is being supplied to
power input.
O󰀨 PWR2 is not being supplied
to power input.
ALM Green
On When PWR1 or PWR2 is
disconnected, the LED lights
O󰀨 When PWR1 or PWR2 is
connected, the LED is o󰀨
PoE
(1~4) Green
On PoE activated
O󰀨 PoE non-working
Copper
Ports
(1~4)
Green
(top)
On When the port’s data is being
transmitted at 1000Mbps
O󰀨 When the port’s data is being
transmitted at 10/100Mbps
Green
(bottom)
On Ethernet port link
Blinking Ethernet port active
O󰀨 No link
SFP
Port
(5~6)
Green
On The port has established
a link
Blinking
When Fiber port’s data
is being transmitted at
100M/1000Mbps.
O󰀨 When Fiber port linked
down/inactive
EKI-2706G-2GPI
LED Color Description
P1 Green
On PWR1 is being supplied to
power input.
O󰀨 PWR1 is not being supplied
to power input.
P2 Green
On PWR2 is being supplied to
power input.
O󰀨 PWR2 is not being supplied
to power input.
ALM Green
On When PWR1 or PWR2 is
disconnected, the LED lights
O󰀨 When PWR1 or PWR2 is
connected, the LED is o󰀨
PoE
(1~4) Green
On PoE activated
O󰀨 PoE non-working
Copper
Ports
(1~6)
Green
(top)
On When the port’s data is being
transmitted at 1000Mbps
O󰀨 When the port’s data is being
transmitted at 10/100Mbps
Green
(bottom)
On Ethernet port link has been
established
Blinking Ethernet port active
O󰀨 No link
Overview
LED Deîš¿nition (Cont.)
EKI-2706G Series Startup Manual 3
The EKI-2706 series switch supports dual +12~48 VDC
power inputs and changes relay status when power failure
occurs.
1. Insert the positive and negative wires into the V+ and
V- contacts on the terminal block connector.
2. Tighten the wire-clamps screws to prevent the DC wires
coming loose.
Warning: This product is intended to be supplied by an
UL certiîš¿ed power supply or dc source suitable for use at
minimum Tma 75 °C whose output meets SELV or ES1 and
is rated 12-48 Vdc, 0.8A min., if need further assistance,
please contact Advantech for further information.
Warning: Ensure that the voltage of the power source is
correct before connecting the equipment to a power outlet.
The power outlet socket should have grounded connection.
Warning: Never open the equipment. For safety reasons,
the equipment should be opened only by qualiîš¿ed skilled
person.
Avertissement: Ce produit est destiné à être alimenté par
une alimentation certiée UL ou une source de courant
continu adaptée à une utilisation à au moins Tma 75 °C
dont la sortie satisfait les conditions SELV ou ES1 et est
évaluée à 12-48Vdc, 0.8A min-imum. Si vous avez besoin
d’une aide supplémentaire, veuillez contacter Advantech
pour plus d’informations.
Avertissement: Assurez-vous que la tension de la source
d’alimentation est correcte avant de connecter l’équipement
à une prise de courant. La prise de courant doit avoir une
prise de terre.
Avertissement: N’ouvrez jamais l’équipement. Pour des
Raisons de sécurité, l’équipement ne doit être ouvert que
par une personne qualiée.
DIN-rail Mounting
1. Installing the DIN-Rail Mounting Kit.
2. Removing the DIN-Rail Mounting Kit.
Power Connection Mounting

Product specificaties

Merk: Advantech
Categorie: Schakelaar
Model: EKI-2706G-2FPI-A

Heb je hulp nodig?

Als je hulp nodig hebt met Advantech EKI-2706G-2FPI-A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Schakelaar Advantech

Advantech

Advantech EKI-2710G-2FPI-A Handleiding

14 November 2024
Advantech

Advantech EKI-5526I-MB-AE Handleiding

14 November 2024
Advantech

Advantech EKI-2706G-2GPI-A Handleiding

14 November 2024
Advantech

Advantech EKI-5626CI-MB-AE Handleiding

14 November 2024
Advantech

Advantech EKI-7708G-4FI-AE Handleiding

14 November 2024
Advantech

Advantech EKI-2706G-2FPI-A Handleiding

14 November 2024
Advantech

Advantech EKI-2728-D Handleiding

14 November 2024
Advantech

Advantech EKI-2705E-1GPI-A Handleiding

14 November 2024
Advantech

Advantech EKI-2541MI-BE Handleiding

14 November 2024
Advantech

Advantech EKI-2725-CE Handleiding

14 November 2024

Handleiding Schakelaar

Nieuwste handleidingen voor Schakelaar

Hager

Hager SPB115 Handleiding

3 December 2024
Hager

Hager UK21L1A Handleiding

3 December 2024
Hager

Hager UK32N1A Handleiding

3 December 2024
Hager

Hager UD22D4B Handleiding

3 December 2024
Hager

Hager UD21D2B Handleiding

3 December 2024
Hager

Hager UD31D1B Handleiding

3 December 2024
Hager

Hager UC11RK Handleiding

3 December 2024
Hager

Hager HFD440 Handleiding

3 December 2024
Hager

Hager HFD406 Handleiding

3 December 2024
Hager

Hager SPB215 Handleiding

3 December 2024