Advantech EKI-2705E-1GPI-A Handleiding

Advantech Schakelaar EKI-2705E-1GPI-A

Lees hieronder de 📖 handleiding in het Nederlandse voor Advantech EKI-2705E-1GPI-A (3 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 5 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/3
EKI-2705 Startup Manual 1
Before installation, please make sure that the following
items have been shipped:
• 1 x EKI-2705G-1GPI/EKI-2705E-1GPI Ethernet Switch
• 2 x Wall mounting brackets with screws
• 1 x DIN-rail Mounting Bracket and Screws
• 1 EKI-2705G-1GPI/EKI-2705E-1GPI Startup Manual
* If any of these items are missing or damaged, contact your
distributor or sales representative immediately.
For more detailed information, please refer to the full manual
which can be found on the Advan- tech’s website.
The EKI-2705G-1GPI/EKI-2705E-1GPI supports 24-48VDC re-
dundant power input and is secured with a double protection
mechanism: Power Polarity Reverse Protect and an Overload
Current Fuse. The EKI-2705G-1GPI/EKI-2705E-1GPI
supports up to 4 IEEE 802.3 af/ at PoE ports, and is more
convenient for users to power up their devices. Each port of
the EKI-2705G-1GPI/EKI-2705E-1GPI has two LED’s to show
the link status transmission speed. It also provides a relay
output for an event alarm. In the event of a power failure, the
built-in LED will activate the alarm to notify administrators.
Engineers can verify the hardware status by checking the
LED, and make troubleshooting quick and easy. The compact
EKI-2705G-1GPI/EKI-2705E-1GPI comes with IP30 rated
metal housing to help against ingress from dusty industrial
environments.
EKI-2705G-1GPI/EKI-2705E-1GPI
Industrial Ethernet Switch
Startup Manual
General
• Compatibility: IEEE 802.3, 802.3u, 802.3x, 802.3ab,
802.3z
• LAN:
- EKI-2705E-1GPI: 4 x 10/100Mbps PoE ports (RJ-45), 1
x 10/100/1000Mbps (RJ45)
- EKI-2705G-1GPI: 4 x 10/100/1000Mbps PoE ports (RJ-
45), 1 x 10/100/1000Mbps (RJ45)
• Ethernet RJ-45: Up to 100 m
• Connectors: 5 x RJ-45
• Switch Architecture: Store and Forward
• Power Input Rating:
- 48VDC
, 1.92A
- 24VDC
, 4.12A
• PoE Output (Port 1 ~ Port 4):
- 75°C, Total 60W, per port max. 30W
- 60°C, Total 90W, per port max. 30W
• Power Consumption: Max.2W
• Power Budget: 90W
• Dimensions (W x H x D): 30 x 140 x 95 mm
• Enclosure: IP30
• Operating Temperature:
-40 ~ 75°C (-40 ~ 167°F)
• Storage Temperature: -40 ~ 85°C (-40°F ~ 185°F)
• Operating Humidity: 5 ~ 95% (non-condensing)
• Storage Humidity: 5 ~ 95% (non-condensing)
• Safety: UL 62368-1
• EMC: CE, FCC Class A
• Warranty: 5 years
• Altitude: Up to 3000m
Company Address
ADVANTECH CO., LTD.
（研華股份有限公司）
No.1, ALLEY 20, LANE 26, RUEIGUANG RD, NEIHU
DISTRICT, TAIPEI 114. TAIWAN
Introduction
Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com/products/
For technical support and service:
http://www.advantech.com/support/
This manual is for the EKI-2705.
Part No. 2049270501 2nd Edition
July 2024
User Manual
Specications
2 EKI-2705 Startup Manual
Warning
1. Do not block air ventilation holes.
Ne bloquez pas les ou es de ventilation.
2. Use dry cloth for cleaning.
Utilisez un chion sec pour le nettoyage.
3. This is open type equipment and
should be installed in a
suitable enclosure .
Ceci est un appareil de type ouvert et doit être.
LEDDenition
LED Color Description
Status
LEDs
P1 Green
On PWR1 is being supplied
to power input.
O󰀨 PWR1 is not being sup-
plied to power input.
P2 Green
On PWR2 is being supplied
to power input.
O󰀨 PWR2 is not being sup-
plied to power input.
P-fail Red
On
When PWR1 or PWR2
is disconnected, the
LED lights
O󰀨
When PWR1 or PWR2
is connected, the LED
iso󰀨
Port
LEDs
PoE
(1~4) Green On PoE activated
O󰀨 PoE non-working
Copper
Ports
(1~5)
Green
(top)
On Ethernet port link has
been established
Blinking Ethernet port active
O󰀨 No link
Green/
Amber
(bottom)
Green
On
When the port’s data is
being transmitted at
Amber
On
When the port’s data
is being transmitted at
100Mbps
O󰀨
When the port’s data
is being transmitted at
10Mbps
EKI-2705G EKI-2705E
Overview
DIN-rail Mounting
Installing the DIN-Rail Mounting Kit.
1. Insert the top back of the mounting bracket over the
DIN rail.
2. Push the bottom of the switch towards the DIN rail until
it snaps into place.
Removing the DIN-Rail
1. Insert the top back of the mounting bracket over the
DIN rail.
2. Push the bottom of the switch towards the DIN rail until
it snaps into place.
Minimum safe height: Up 10 cm/Down 10 cm
Wall Mounting
1. Remove the Din Rail.
2. Attach the brackets included to the switch with screws.
3. With the brackets attached, hang the switch to the nails
on the wall.
4. Secure the wall mounting plates to the wall in the
industrial panel.
Minimum safe height: Up 10 cm/Down 10cm
M3X10L (Depth: 10mm)
2
1
DIN Rai l
2
1
DIN Rai l
Mounting
EKI-2705 Startup Manual 3
M3X10L (Depth: 10mm)
Power Connection
The EKI-2705G/EKI-2705E switch supports dual 24~48 VDC
power inputs and changes relay status when power failure
occurs.
1. Insert the positive and negative wires into the V+ and
V- contacts on the terminal block connector.
2. Tighten the wire-clamps screws to prevent the DC wires
coming loose.
3. Take into consideration the following guidelines before
wiring the device.
4. The terminal block (CN1) is suitable for 12-18 AWG
(7A). Torque value 7 lb-in.
5. The cross sectional area of the earthing conductors
should be at least 18AWG.
6. The temperature rating of the input connection cable
should higher than 95°C.
Disconnect all power sources.
Débrancher toutes les sources d’alimentation.
Safety Instructions
The switches support +24-48VDC power inputs.
Les commutateurs peuvent être alimentés en utilisant SELV
+ 24-48VDC.
1. The switches must be powered by using UL62368-
1 Listed power source, rated 24Vdc, 5A minimum
or 48Vdc, 2.5A minimum and Tma 75 degree up to
3000m.
Le commutateur doit être homologuée selon les
normes UL62368-1 et alimentés par un courant de
sortie de 24Vdc, 5A minimum ou 48Vdc, 2.5A minimum,
et température ambiante maximale (Tma) 75 degrés
jusqu’à 3000m.
2. Ensure to connect the power cord to a socket-outlet
with earthing connection.
Branchez correctement le câble de raccordement à la
terre à la prise de l’appareil.
3. If the equipment is not used for a long time, remove it
from the power source to avoid damage by transient
over voltage.
Si l’appareil n’est pas utilisé pendant une longue
période, retirez-le de l’alimentation électrique pour éviter
d’endommager la surtension momentanée.
4. For use in pollution free environments and indoor use.
Pour une utilisation dans des environnements non pollu-
ant et à l’intérieur.
5. Never open the equipment. For safety reasons, the
equipmentshouldbeopenedonlybyqualiedservice
personnel.
N’ouvrez jamais l’équipement. Pour des raisons de sécu-
rité, l’appareil ne devrait être ouvert que par un personnel
de service qualié.
6. This equipment is not suitable for use in locations
where children are likely to be present.
Cet appareil ne doit pas être utilisé dans des endroits où
se trouvent des enfants.
DC 24~48V
Power Connection (Cont.) Mounting (Cont.)

Product specificaties

Merk: Advantech
Categorie: Schakelaar
Model: EKI-2705E-1GPI-A

Heb je hulp nodig?

Als je hulp nodig hebt met Advantech EKI-2705E-1GPI-A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Schakelaar Advantech

Advantech

Advantech EKI-2710G-2FPI-A Handleiding

14 November 2024
Advantech

Advantech EKI-5526I-MB-AE Handleiding

14 November 2024
Advantech

Advantech EKI-2706G-2GPI-A Handleiding

14 November 2024
Advantech

Advantech EKI-5626CI-MB-AE Handleiding

14 November 2024
Advantech

Advantech EKI-7708G-4FI-AE Handleiding

14 November 2024
Advantech

Advantech EKI-2706G-2FPI-A Handleiding

14 November 2024
Advantech

Advantech EKI-2728-D Handleiding

14 November 2024
Advantech

Advantech EKI-2705E-1GPI-A Handleiding

14 November 2024
Advantech

Advantech EKI-2541MI-BE Handleiding

14 November 2024
Advantech

Advantech EKI-2725-CE Handleiding

14 November 2024

Handleiding Schakelaar

Nieuwste handleidingen voor Schakelaar

D-Link

D-Link DXS-1100-16SC Handleiding

14 November 2024
Yamaha

Yamaha SFP-SWRG-SX Handleiding

14 November 2024
Yamaha

Yamaha SFP-SWRT-SR Handleiding

14 November 2024
Yamaha

Yamaha SFP-SWRT-LR Handleiding

13 November 2024
Elektrobock

Elektrobock CS3C-4 Handleiding

13 November 2024
Hager

Hager ESC225 Handleiding

13 November 2024
D-Link

D-Link DKVM-450 Handleiding

13 November 2024
D-Link

D-Link DKVM-4 Handleiding

13 November 2024
D-Link

D-Link DKVM-2 Handleiding

13 November 2024
D-Link

D-Link DKVM-222 Handleiding

13 November 2024