Adj XS 400 Handleiding

Adj Effect machine XS 400

Lees hieronder de 📖 handleiding in het Nederlandse voor Adj XS 400 (14 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/14

10/15

User Instructions

XS 400

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building,

and electrical damages, injuries to any persons, and direct or

indirect economic loss associated with the use or reliance of

any information contained within this document, and/or as a

result of the improper, unsafe, unsucient and negligent as-

sembly, installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

ADJ Products, LLC - www.adj.com - XS 400 User Manual Page 3

• Multi-Colors

• 3 Operating Modes - Sound Active, Show Mode, and DMX Control

• 2 DMX Channel Modes (16 Channel Mode, & 18 Channel Mode)

• Stand Alone or Master-Slave Setup

• Internal Microphone

• Digital Display for Address and Function Setting

• Power Cord Daisy Chain (See page 15)

• UC IR Compatible (Not Included) & Airstream IR Comptiable

XS 400 Features

XS 400 Installation

XS 400 Warranty Registration

The XS 400 2 year (730 days) limited warranty. Please fill out carries a

the enclosed warranty card to validate your purchase and warranty.

You may also register your product online at www. americandj.com.

All returned service items whether under warranty or not, must be

freight pre-paid and accompany a return authorization (R.A.) umber. n

If the unit is under warranty you must provide a copy of your proof of

purchase invoice. Please contact ADJ Products, LLC customer sup-

port for a R.A. number.

To optimize the performance of this product, please read these

operating instructions carefully to familiarize yourself with the basic

operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please

keep this manual with the unit, for future reference.

XS 400 General Instructions

ADJ Products, LLC - www.adj.com - XS 400 User Manual Page 2

XS 400 General Information

Unpacking: Thank you for purchasing the XS 400 by ADJ Products,

LLC. Every XS 400 has been thoroughly tested and has been shipped

in perfect operating condition. Carefully check the shipping carton for

damage that may have occurred during shipping. If the carton appears

to be damaged, carefully inspect your xture for any damage and be

sure all equipment necessary to operate the unit has arrived intact. In

the event damage has been found or parts are missing, please contact

our toll free customer support number for further instructions. Please

do not return this unit to your dealer without contacting customer sup-

port rst.

Introduction: The ADJ XS 400 is a new revolution in moving lights.

It features a single Axis head that has continuous 360 degree tilt rota-

tion. The XS 400 can operate as a fixture or in a Master/stand alone

Slave configuration. The XS 400 has three operating modes; sound

active mode, show mode, and DMX control. This fixture is suitable for

theaters, studios, retail stores, and other similar locations. For best

results use fog or special effects smoke to enhance the beams projec-

tions.

Customer Support: ADJ Products, LLC provides a toll free cus-

tomer support line, to provide help and to answer any question should

you encounter problems during your set up or initial operation. You

may also visit us on the web at www.adj.com for any comments or

suggestions. Service Hours are Monday through Friday 8:00 a.m. to

4:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures

warranty. In the unlikely event your unit may require service please

contact ADJ Products, LLC.

ADJ Products, LLC will not accept any liability for any resulting dam-

ages caused by the non-observance of this manual or any unauthor-

ized modication to this unit.

The unit should be mounted using a mounting clamp (not provided),

axing it to the mounting bracket that is provided with the unit.

Always ensure that the unit is rmly xed to avoid vibration and slip-

ping while operating. Always ensure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10

times the unit’s weight. Also, always use a safety cable that can hold

12 times the weight of the unit when installing the xture. The equip-

ment must be installed by a professional, and it must be installed in a

place where it is out of the reach of people’s grasp.

For Your Own Personal Safety, Please Read and Understand This

Manual Completely Before You Attempt To Install Or Operate

This Unit!

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required volt-

age for your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken.

• Do not attempt to remove or break o the ground prong from

the electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to cords at plugs, convenience recep-

tacles, and the point where they exit from the appliance.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer. See page 22 for cleaning details.

• Heat -This fixture should be situated away from heat sources such

as radiators, heat registers, stoves, or other appliances (including

amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. Objects have fallen, or liquid has been spilled into the appliance.

B. The appliance has been exposed to rain or water.

C. The appliance does not appear to operate normally or exhibits a

marked change in performance.

XS 400 Safety Precautions

ADJ Products, LLC - www.adj.com - XS 400 User Manual Page 4 ADJ Products, LLC - www.adj.com - XS 400 User Manual Page 5

Power Supply: The ADJ XS 400 contains a automatic voltage switch,

which will auto sense the voltage when it is plugged into the power

source. With this switch there is no need to worry about the correct

power voltage, this unit can be plugged in anywhere.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used by most lighting and controller manufactures as a form of

communication between intelligent fixtures and controllers. A DMX

controller sends DMX data instructions from the controller to the fix-

ture. DMX data is sent as serial data that travels from fixture to fixture

via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX

fixtures (most controllers only have a DATA “OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models

of dierent manufactures to be linked together and operate from a

single controller, as long as all xtures and the controller are DMX

compliant. To ensure proper DMX data transmission, when using

several DMX fixtures try to use the shortest cable path possible. The

order in which fixtures are connected in a DMX line does not influence

the DMX addressing. For example; a fixture assigned a DMX address

of 1 may be placed anywhere in a DMX line, at the beginning, at the

end, or anywhere in the middle. Therefore, the first fixture controlled

by the controller could be the last fixture in the chain. When a fixture

is assigned a DMX address of 1, the DMX controller knows to send

DATA assigned to address 1 to that unit, no matter where it is located

in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX and Master/Slave

Operation): The XS 400 can be controlled via DMX-512 protocol. The

XS 400 has 2 DMX Channel Modes. The DMX address is set electroni-

cally using the controls on the front panel of the

unit. Your unit and your DMX controller require a

approved DMX-512 110 Ohm Data cable for data

input and data output (Figure 1). We recommend

Accu-Cable DMX cables. If you are making your

own cables, be sure to use standard 110-120 Ohm

shielded cable (This cable may be purchased at

almost all professional sound and lighting stores).

Your cables should be made with a male and

XS 400 DMX Set Up

Figure 1

Product specificaties

Merk:	Adj
Categorie:	Effect machine
Model:	XS 400
Soort bediening:	Knoppen
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	2500 g
Breedte:	124 mm
Diepte:	170 mm
Hoogte:	285 mm
Snoerlengte:	1.2 m
Illuminance:	5531 Lux
Aantal lampen:	4 lampen
Soort lamp:	LED
Vermogen lamp:	10 W
Stroombron:	AC
Ingangsspanning:	100 - 240 V
Levensduur lamp:	50000 uur
Kleur licht:	Blue, Green, Red, White
Frequentie:	50/60 Hz
Geschikt voor gebruik binnen:	Ja
Stralingshoek:	5 °
Draaien:	Ja
XLR in:	Ja
Stroomverbruik (typisch):	40 W
Type product:	Discostroboscoop
Type beeldscherm:	LED
Verlichtingsmodi:	DMX, Sound activated, Stand-alone
Lichtregelingsprotocollen:	DMX
DMX-ingang:	Ja
DMX-uitgang:	Ja
Aantal pinnen:	3
Baldiameter:	- "
Aantal DMX-kanalen:	18 kanalen
Minimumhoeveelheid DMX-kanalen:	16 kanalen