Adj Mega Go Par64 RGBA Handleiding

Adj Effect machine Mega Go Par64 RGBA

Lees hieronder de 📖 handleiding in het Nederlandse voor Adj Mega Go Par64 RGBA (12 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

User Instructions

MEGA GO PAR64 RGBA Introduction

ADJ Products, LLC - www.adj.com - MEGA GO PAR64 RGBA User Manual Page 2

Rev. 4/14

Unpacking: Thank you for purchasing the MEGA GO PAR64 RGBA

by ADJ Products, LLC. Every MEGA GO PAR64 RGBA has been

thoroughly tested and has been shipped in perfect operating condi-

tion. Carefully check the shipping carton for damage that may have

occurred during shipping. If the carton appears to be damaged, care-

fully inspect your xture for any damage and be sure all accessories

necessary to operate the unit has arrived intact. In the case damage

has been found or parts are missing, please contact our toll free cus-

tomer support number for further instructions. Do not return this unit to

your dealer without rst contacting customer support.

Introduction: The MEGA GO PAR64 RGBA is a rechargeable lithium

battery powered, DMX intelligent, LED par fixture. This unit give you the

freedom to set up your fixture where ever you wish without the restric-

tions of power. The built-in battery will keep charge for up to 8 hours

(full on) from a full, single charge. This xture can be used in a stand

alone mode or connected in a Master/Slave conguration. This wash

has five operating modes: Sound Active mode, Auto Run mode, RGB

mode, Static Color mode, and DMX control mode.

Customer Support: ADJ Products, LLC provides a customer support

line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.adj.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

MEGA GO PAR64 RGBA

MEGA GO PAR64 RGBA Safety Precautions

ADJ Products, LLC - www.adj.com - MEGA GO PAR64 RGBA User Manual Page 4ADJ Products, LLC - www.adj.com - MEGA GO PAR64 RGBA User Manual Page 3

• Rechargeable Lithium Battery

• Mulit-Colors

• Five Operating Modes

• Electronic Dimming 0-100%

• Built in Microphone

• DMX-512 protocol

• 3-Pin DMX Connection

• 7 DMX Modes: 1 Channel Mode, 2 Channel Mode, 4 Channel

Mode, 5 Channel Mode, 6 Channel Mode, 7 Channel Mode, and

8 Channel Mode.

• ADJ RFC compatiable (Not Included)

• Power Cord Daisy Chain (See page 14)

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 22 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

MEGA GO PAR64 RGBA Warranty Registration

MEGA GO PAR64 RGBA Features

The MEGA GO PAR64 RGBA carries a year limited warranty. Please 2

fill out the enclosed warranty card to validate your purchase. All

returned service items whether under warranty or not, must be freight

pre-paid and accompany a return authorization (R.A.) number. The

R.A. number must be clearly written on the outside of the return pack-

age. A brief description of the problem as well as the R.A. number

must also be written down on a piece of paper included in the ship-

ping carton. If the unit is under warranty, you must provide a copy of

your proof of purchase invoice. You may obtain a R.A. number by con-

tacting our customer support team on our customer support number.

All packages returned to the service department not displaying a R.A.

number on the outside of the package will be returned to the shipper.

The unit should be mounted using a mounting clamp (not provided),

axing it to the mounting bracket that is provided with the unit.

Always ensure that the unit is rmly xed to avoid vibration and slip-

ping while operating. Always ensure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10

times the unit’s weight. Also, always use a safety cable that can hold

12 times the weight of the unit when installing the xture.

The equipment must be installed by a professional, and it must be

installed in a place where it is out of the reach of people’s grasp.

MEGA GO PAR64 RGBA Installation

ADJ Products, LLC - www.adj.com - MEGA GO PAR64 RGBA User Manual Page 5 ADJ Products, LLC - www.adj.com - MEGA GO PAR64 RGBA User Manual Page 6

1. Handling of Batteries

1.1 Do Not Short Circuit the Battery

Try to never short circuit the battery. It generates a very high

current which could cause the battery to overheat which may

result in electrolyte gel leakage, harmful fumes, or explosion.

The LIR tabs may easily short-circuit by placing them on con-

ductive surface. A short circuit may lead to heat build up and

damage of the battery. An appropriate circuitry with PCM is

employed to protect accidental short circuit of the battery pack.

1.2 Mechanical shock

Droping the unit, impact hit, bending, etc. may cause failure or

shortend life of the LIR battery.

3. Other

3.1 Battery connection

1). Direct soldering of wire leads or devices to the battery is

strictly prohibited.

2). Lead tabs with pre-soldered wiring shall be spot welded to

the batteries. Direct soldering may cause damage of compo-

nents, such as separator and insulator, by heat build up.

3.2 Prevention of short circuit within a battery pack

There is enough insulation layers between wiring and the bat-

teries to provide extra safety protection. The battery pack is

constructed in a way that no short circuit will occur which may

cause smoke or re.

3.3 Do No Disassemble the Batteries

1). Never disassemble the batteries.

Doing this may cause a internal short circuit in the battery,

which may lead to harmful fumes, re, explosion, or other prob-

lems.

2). Electrolyte Gel is harmful

Electrolyte Gel should not leak from the LIR battery. Should the

electrolyte gel come into contact with the skin or eyes, ush the

area of contact immediately with fresh water and seek medical

attention immediately.

3.4 Do Not Expose the Battery to Heat or Fire

Never incinerate or dispose of the batteries in re. This may

cause an explosion, which would be very dangerous.

3.5 Do Not Expose the Battery to water or liquids

Never soak/drop the batteries in liquids such as water, seawa-

ter, drinks such as soft drinks, juices, coee or other.

3.6 Battery Replacement

For battery replacement please contact ADJ customer support

(800) 322-6337.

3.7 Do Not use a damaged Battery

The battery could be damaged during shipping, caused by

shock. Should the battery be found damaged, including dam-

ages to the plastic casing of the battery, deformation of the

battery package, smelling of an electrolyte, or leakage of the

electrolyte gel, or other, DO NOT use the battery. A battery with

a odor of electrolyte or a gel leakage should be placed away

from re to avoid re or explosion.

4. Battery Storage

When storing the battery, it should be stored at room tempera-

ture, with a charge of at least 50%. We recommend that during

long periods of storage that the battery be charged every 6

months. Doing this will prolong the life of the battery and will

also make sure that the battery charge does not fall below the

30% mark.

5. Other Chemical Reaction

Because batteries utilize a chemical reaction, battery per-

formance will deteriorate over time even if stored for a long

period of time without being used. In addition, if the various

usage conditions such as charge, discharge, ambient tempera-

ture, etc. are not maintained within the specied ranges, the

MEGA GO PAR64 RGBA Battery Precautions MEGA GO PAR64 RGBA Battery Precautions

Product specificaties

Merk:	Adj
Categorie:	Effect machine
Model:	Mega Go Par64 RGBA
Soort bediening:	Knoppen
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	2200 g
Breedte:	260 mm
Diepte:	262 mm
Hoogte:	110 mm
Aantal lampen:	177 lampen
Soort lamp:	LED
Stroombron:	AC/Batterij
Ingangsspanning:	100 - 240 V
Aantal:	4
Accu/Batterij oplaadtijd:	6.5 uur
Pulse function:	Ja
Levensduur lamp:	50000 uur
Kleur licht:	Blue, Green, Red, Yellow
Frequentie:	50 - 60 Hz
Geschikt voor gebruik binnen:	Ja
Stralingshoek:	30 °
XLR in:	Ja
Afstandsbediening inbegrepen:	Ja
Stroomverbruik (typisch):	22 W
Type product:	Disco-spotlight
Type beeldscherm:	LED
Type batterij:	Lithium-Ion (Li-Ion)
Verlichtingsmodi:	Auto, DMX, Sound activated
Lichtregelingsprotocollen:	DMX
Dimbereik:	0 - 100 procent
Ingebouwde macro's:	Ja
Flikkervrije werking:	Ja
Baldiameter:	- "
Aantal DMX-kanalen:	7 kanalen