Adj Uni Pak II Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Adj Uni Pak II (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
4295 Charter Street Los Angeles, CA 90058 USA
Tel: 323-582-3322 Fax: 323-582-3311
Web: www.elationlighting.com
E-mail: info
@
elationli
g
htin
g
.com
Elation Professional R
4295 Charter Street
Los Angeles CA. 90058
www.elationli
g
htin
g
.com
Elation Professional R
User Manual
Technical Specifications
Power Input ................................................................ AC 120V~60Hz, 10 A max.
Channel Output ..................................................................................... 10 A max.
DMX OUTPUT................................................................ 3-pin XLR female socket
DMX INPUT........................................................................ 3-pin XLR male socket
Fuse Type.............................................................................. F10A 250V 5x20mm
Dimensions ............................................7.17L x 3.62W x 2.56H (182x92x65mm)
Weight ............................................................................................2.5lbs. (1.1 Kg)
12
Features
1
Thank you for purchasing the Uni pak-II hybrid dimmer/switch pack.
This product includes the following features:
Every effort has been made to design dependable and reliable products. New
products are constantly being designed to meet the needs of the entertainment
lighting industry. Your comments regarding our products and services are welcome.
Please send us an e-mail to info@elationlighting.com and let us know how we
can improve to better serve you.
It’s both a privilege and a pleasure serving you.
1 channel hybrid pack with dual Edison output sockets.
Pack is user assignable between Dimmer & Switch modes.
10 Amp Maximum output.
On board control fader allows for dim intensity adjustment, from 0-100%.
External control fader allows for dim intensity adjustment, from 0-100%.
4 digit segment display shows current activity and function state.
3-pin standard DMX IN/OUT ports.
10
Installation / Mounting
The Uni pak-II was designed to be mounted on a truss rig or ceiling. It is
recommended that you use a suitable mounting clamp and safety cable when
mounting to any structure. There are two holes on the Uni pak-II. These are in
place for a mounting clamp or to fasten to a wall or ceiling. For cooling purposes,
it is necessary to mount the pack so that air is free to circulate around the dimmer.
There should be at least 12 inches of clearance between the pack and anything
surrounding it.
Connections
The Uni pak-II is supplied with a single 10 Amp Edison plug attached to a 16 gauge
line cord. This cord should be connected to a service capable of suppling
at least 10 amps and be protected by a properly sized circuit breaker. Lamp loads
should be plugged into to the dual 10 Amp Edison sockets which are supplied on
the face of the pack. 3 pin XLR’s are supplied for the input and output of the data
link. Connect out of the console or previous fixture in line and into the input of
the Uni pak-II. Connect out of the Uni pak-II and into the input of next pack or
fixture in line. It is recommended that the last pack or fixture in line include a DMX
terminator into the output. A DMX terminator consists of a 120 ohm, 1/4 watt
resistor soldered across pins 2 & 3 of a 3 pin XLR connector.
Installation, Mounting and Connections


Product specificaties

Merk: Adj
Categorie: Niet gecategoriseerd
Model: Uni Pak II

Heb je hulp nodig?

Als je hulp nodig hebt met Adj Uni Pak II stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Adj

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd