Adj T4 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Adj T4 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
American DJ
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.com
User Instructions
American DJ®
T4 Unpacking
Thank you for purchasing the T4™ by American DJ®. Every T4™ has
been thoroughly tested and has been shipped in perfect operating con-
dition. Carefully check the shipping carton for damage that may have
occurred during shipping. If the carton appears to be damaged, care-
fully inspect your unit for any damage and be sure all equipment neces-
sary to operate the system has arrived intact. In the event damage has
been found or parts are missing, please contact our toll free customer
support number for further instructions. Please do not return the unit to
your dealer without fi rst contacting customer support.
Customer Support:
American DJ® provides a toll free customer support line, to provide set
up help and to answer any question should you encounter problems
during your set up or initial operation. You may also visit us on the web
at www.americandj.com for any comments or suggestions. For service
related issue please contact American DJ®. Service Hours are Monday
through Friday 9:00 a.m. to 5:00 p.m. Pacifi c Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2610
E-mail: support@americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
your nearest American DJ dealer.
Do not discard the shipping cartoon in the trash. Please recycle when
ever possible.
Safety Issues:
This unit may blow a fuse if the maximum allotted load of 6.3 amp
was reached. If the fuse needs replacement always replace the
fuse with same exact type that was remove from the unit, unless
otherwise instructed by an authorized American DJ® service technician.
Using a different fuse from that which is recommended will void the
manufactures warranty and may cause fire or electric shock.
T4 Introduction
© ®American DJ Supply - www.americandj.com - T4™ Instruction Manual Page 2
T4 Operating Instructions
© ®American DJ Supply - www.americandj.com - T4™ Instruction Manual Page 3
Features:
The T4™ is a 4 channel chaser. The T4™ can be set to run in audio
or chase mode. The audio mode will trigger the chase pattern to the
rhythm of the beat. Chase mode will chase without requiring an audio
signal. The T4™ is deigned to run par cans, pin spots, and other small
fixture. You may draw a total of 6.3A from the controller. Each channel
can draw up to 5A per a channel. Plug your fixtures into the Edison
sockets on the sides of the T4.™ After plugging your fixtures into the
T4™ plug the T4™ into a standard grounded wall outlet. Select your
operation mode and turn the T4™ on. Remember that if you select
the audio operation mode the T4™ will not chase until it receives an
audio signal.
T4 Operating Modes
Slow:
When the Mode switch is in the “SLOW” position the unit will chase
(step from one to channel to the next) at a slow pace.
Normal:
When the Mode switch is in the “NORMAL” position the unit will chase
at a regular pace.
Audio:
When in the AUDIO mode each chase step will be regulated by
low frequencies heard through the built-in microphone.Turning the
speed knob down completely (counter-clockwise) in audio mode will
regulate the chase solely by low frequencies heard through the built-in
microphone. The audio sensitivity is preset by the manufacture and
may be adjusted.
T4 Warranty Card
The T4™ carries a 90 day limited warranty. We recommend you fill
out the enclosed warranty card to validate your purchase. All returned
service items whether under warranty or not, must be freight pre-paid
and accompany a return authorization (R.A.) number. If the unit is
under warranty, you must provide a copy of your proof of purchase
invoice. Please contact American DJ® customer support for a R.A.
number.
T4 Controls & Functions
1. 3-POLE ELECTRICAL OUTLETS -
These are standard Edison 3-pole grounded electrical outlets.
2. INTERNAL MICROPHONE -
The T4™ comes equipped with a built-in microphone to pick-up the
beat of the music. This is used to trigger the controller in the audio
mode. The internal microphone will have no function when chase
mode is selected.
3. MODE SELECTOR SWITCH -
This switch is used to select any of the three operating modes; Slow,
Normal, or Audio.
4. LED INDICATORS -
The four channel LED’s will also glow to indicate channel activity.
5. SPEED ADJUSTMENT KNOB -
The T4™ uses a speed control knob to adjust the chase rate of the
built in program. Turning the speed knob in a clockwise direction will
increase the chase rate, turning the speed knob in a counter-clockwise
direction will decrease the chase rate.
© ®American DJ Supply - www.americandj.com - T4™ Instruction Manual Page 4
®
TM
SPEED
FastSlow
Mon tor
1 2 3 4
Mic
Normal AudioSlow
American DJ
1 5432
© ®American DJ Supply - www.americandj.com - T4™ Instruction Manual Page 6
The T4™ backing plate was designed to be removed and reversed.
Reversing the backing plate will allow you to mount the T4™ to a tripod,
such as the American DJ® LTS-6, without the use of a clamp. To
reverse the backing plate, be sure
T4 Mounting Options
Step 1: With a Phil-
lips #1 screwdriver
remove the four screw
that hold the back
plate to unit.
Step 4: Line up the
screw holes and
Step 3: Flip the
backing plate over
and reattached to the
unit.
Step 2: Remove the
backing plate from the
unit.
6. Power Cord - This cord provides the unit’s main power. Please follow
the following power guide lines:
Be sure that the local power outlet match that of the required volt-
age of the unit.
Do not attempt to operate this unit if the power cord has been
frayed or damaged.
Disconnect from main power before making any type of connection.
Never plug this mixer in to a dimmer pack.
Route your power cord out of the way of foot traffi c.
Power Cord Protection - Power supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the
mixer.
Disconnect main power during long periods of none use.
7. Fuse Holder & Fuse - This fuse holder holds a 6.3A GMA fuse. To
replace the fuse; Insert a at head screwdriver into the fuse holder slot
and turn counter-clockwise. Remove the fuse holder and replace with a
similar fuse. Replace in reverse order.
Caution: Always replace with the exact same type fuse, unless
otherwise specified by an authorized American DJ® service tech-
nician. Replacing with a fuse other than specifi ed may damage
your unit and will void your manufactures warranty
8. Power Switch - This is the main power ON/OFF button. Before main
power is applied, be sure you have made all connections.
© ®American DJ Supply - www.americandj.com - T4™ Instruction Manual Page 5
T4 Controls & Functions
POWER INPUT FUSE POWER
WARNING: THIS APPARATUS MUST BE EARTHED.
CAUTION:
RISK OF ELECTRIC SHOCK, DO NOT OPEN.
N OUVREZ PAS...RISQUE DE CHOCELECTRIQUE
POWER INPUT: AC 120V~60Hz, 6A
OUTPUT: 0.06-5A/CH
MAX LOADING: 6A
FUSE: F6A 250V 5x20mm
876


Product specificaties

Merk: Adj
Categorie: Niet gecategoriseerd
Model: T4

Heb je hulp nodig?

Als je hulp nodig hebt met Adj T4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Adj

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd