Adj Pinpoint Go TW Handleiding

Adj Niet gecategoriseerd Pinpoint Go TW

Lees hieronder de 📖 handleiding in het Nederlandse voor Adj Pinpoint Go TW (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

User Instructions

2/15

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building, and

electrical damages, injuries to any persons, and direct or indi-

rect economic loss associated with the use or reliance of any

information contained within this document, and/or as a result

of the improper, unsafe, unsucient and negligent assembly,

installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

PINPOINT GO TW

ADJ Products, LLC - www.adj.com - PinPoint GO TW User Manual Page 3

• DC Powered and Battery Powered

• Dimming 0-100%

• Fast Color Fade & Change and Slow Color Fade & Change,

• ADJ LED RC3 Compatible (Sold Separately)

PinPoint GO TW Warranty Registration

PinPoint GO TW Features

To optimize the performance of this product, please read these operat-

ing instructions carefully to familiarize yourself with the basic operations

of this unit. These instructions contain important safety information

regarding the use and maintenance of this unit. Please keep this manual

with the unit, for future reference.

PinPoint GO TW General Instructions

The PinPoint GO TW two year limited warranty. Please fill carries a

out the enclosed warranty card to validate your purchase. All returned

service items whether under warranty or not, must be freight pre-paid

and accompany a return authorization (R.A.) number. The R.A. number

must be clearly written on the outside of the return package. A brief

description of the problem as well as the R.A. number must also be

written down on a piece of paper included in the shipping carton. If

the unit is under warranty, you must provide a copy of your proof of

purchase invoice. You may obtain a R.A. number by contacting our

customer support team on our customer support number. All pack-

ages returned to the service department not displaying a R.A. number

on the outside of the package will be returned to the shipper.

PinPoint GO TW Introduction

ADJ Products, LLC - www.adj.com - PinPoint GO TW User Manual Page 2

Unpacking: Thank you for purchasing the PinPoint GO TW by ADJ

Products, LLC. Every PinPoint GO TW has been thoroughly tested and

has been shipped in perfect operating condition. Carefully check the

shipping carton for damage that may have occurred during shipping.

If the carton appears to be damaged, carefully inspect your xture for

any damage and be sure all accessories necessary to operate the unit

has arrived intact. In the case damage has been found or parts are

missing, please contact our toll free customer support number for fur-

ther instructions. Do not return this unit to your dealer without rst con-

tacting customer support.

Introduction: The ADJ PinPoint GO TW is part of a continuing pur-

suit to create high quality intelligent lighting. The PinPoint GO TW is a

bright, battery powered, LED pinspot.

Customer Support: ADJ provides a customer support line, to pro-

vide set up help and to answer any question should you encounter

problems during your set up or initial operation. You may also visit us

on the web at www.adj.com for any comments or suggestions. Service

Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacic Stan-

dard Time.

Voice: (323) 582-3322

Fax: (323) 582-3108

E-mail: support@americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

PinPoint GO TW Cleaning

Due to fog residue, smoke, and dust cleaning the internal and exter-

nal optical lenses must be carried out periodically to optimize light

output.

1. Use normal glass cleaner and a soft cloth to wipe down the

outside casing.

2. Clean the external optics with glass cleaner and a soft cloth

every 20 days.

3. Always be sure to dry all parts completely before plugging

the unit back in.

Cleaning frequency depends on the environment in which the fixture

operates (i.e. smoke, fog residue, dust, dew).

PinPoint GO TW Safety Precautions

ADJ Products, LLC - www.adj.com - PinPoint GO TW User Manual Page 4 ADJ Products, LLC - www.adj.com - PinPoint GO TW User Manual Page 5

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required volt-

age for your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 3 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

1. Handling of Batteries

1.1 Do Not Short Circuit the Battery

Try to never short circuit the battery. It generates a very high current

which could cause the battery to overheat which may result in elec-

trolyte gel leakage, harmful fumes, or explosion. The LIR tabs may

easily short-circuit by placing them on conductive surface. A short cir-

cuit may lead to heat build up and damage of the battery. An appro-

priate circuitry with PCM is employed to protect accidental short

circuit of the battery pack.

1.2 Mechanical shock

Droping the unit, impact hit, bending, etc. may cause failure or short-

end life of the LIR battery.

2. Other

2.1 Battery connection

1). Direct soldering of wire leads or devices to the battery is strictly

prohibited.

2). Lead tabs with pre-soldered wiring shall be spot welded to the

batteries. Direct soldering may cause damage of components, such

as separator and insulator, by heat build up.

2.2 Prevention of short circuit within a battery pack

There is enough insulation layers between wiring and the batteries to

provide extra safety protection. The battery pack is constructed in a

way that no short circuit will occur which may cause smoke or re.

2.3 Do No Disassemble the Batteries

1). Never disassemble the batteries.

Doing this may cause a internal short circuit in the battery, which may

lead to harmful fumes, re, explosion, or other problems.

2). Electrolyte Gel is harmful

Electrolyte Gel should not leak from the LIR battery. Should the

electrolyte gel come into contact with the skin or eyes, ush the area

of contact immediately with fresh water and seek medical attention

immediately.

2.4 Do Not Expose the Battery to Heat or Fire

Never incinerate or dispose of the batteries in re. This may cause an

explosion, which would be very dangerous.

PinPoint GO TW Battery Precautions

Product specificaties

Merk:	Adj
Categorie:	Niet gecategoriseerd
Model:	Pinpoint Go TW

Heb je hulp nodig?

Als je hulp nodig hebt met Adj Pinpoint Go TW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Adj

Adj Hydro IP Tester Handleiding

15 November 2024

Adj Ultra Beam Bar 12CW Handleiding

5 November 2024

Adj UV Par 100IP Handleiding

5 November 2024

Adj PIXIE DRIVER 2000 V3 Handleiding

3 Juli 2024

Adj Jolt Panel FX2 Handleiding

27 Mei 2024

Adj Wifi Net 2 Handleiding

27 Mei 2024

Adj Par Z100 3K2 Handleiding

27 Mei 2024

Adj H2O Two Handleiding

27 Mei 2024

Adj Jolt Panel FXIP Handleiding

27 Mei 2024

Adj Pixie Curve 60 Handleiding

27 Mei 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Xblitz R8 Power Charge Handleiding

3 December 2024

Xblitz R4 Power Handleiding

3 December 2024

Franke Urban UBG 610-78 Handleiding

3 December 2024

Franke ANX211RHD Handleiding

3 December 2024

Franke ANX220 Handleiding

3 December 2024

Dell NX3330 Handleiding

3 December 2024

Dell PowerConnect B-DCX-4s Handleiding

3 December 2024

Hager AKB83000701 Handleiding

3 December 2024

Hager AKB81500402 Handleiding

3 December 2024

Hager AKBA1500401V Handleiding

3 December 2024