Adj Inno Pocket Fusion Handleiding

Adj Effect machine Inno Pocket Fusion

Lees hieronder de 📖 handleiding in het Nederlandse voor Adj Inno Pocket Fusion (18 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/18

User Instructions

2/15

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building,

and electrical damages, injuries to any persons, and direct or

indirect economic loss associated with the use or reliance of

any information contained within this document, and/or as a

result of the improper, unsafe, unsucient and negligent as-

sembly, installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

INNO POCKET FUSION

ADJ Products, LLC - www.adj.com - Inno Pocket Fusion Instruction Manual Page 3

ADJ Products, LLC - www.adj.com - Inno Pocket Fusion Instruction Manual Page 2

• 5 DMX Channel Modes: 2/6/8/9/11

• 12W White LED & 4.9mW Green Laser (2-FX-1)

• 3 Operating Modes - Sound Active, Show Mode, & DMX Control

• Internal Microphone

• Digital Display for Address and Function Setting

• 8 Preprogrammed Shows

• Power Cord Daisy Chain (See page 30)

• UC IR Compatiable (Sold Separately)

Inno Pocket Fusion Features

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures

warranty. In the unlikely event your unit may require service please

contact ADJ Products, LLC.

During operation the housing may become extremely hot. Avoid touch-

ing the unit with bare hands while in use.

ADJ Products, LLC will not accept any liability for any resulting dam-

ages caused by the non-observance of this manual or any unauthor-

ized modication to this unit.

Inno Pocket Fusion Handling Precautions

Inno Pocket Fusion Warranty Registration

The Inno Pocket Fusion 2 year (730 days) limited warranty. carries a

Please fill out the enclosed warranty card to validate your purchase

and warranty. You may also register your product online at www.

americandj.com. All returned service items whether under warranty or

not, must be freight pre-paid and accompany a return authorization

(R.A.) umber. If the unit is under warranty you must provide an copy

of your proof of purchase invoice. Please contact ADJ customer sup-

port for a R.A. number.

To optimize the performance of this product, please read these

operating instructions carefully to familiarize yourself with the basic

operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please

keep this manual with the unit, for future reference.

Inno Pocket Fusion General Instructions

Inno Pocket Fusion General Information

Unpacking: Thank you for purchasing the Inno Pocket Fusion by

ADJ Products, LLC. Every Inno Pocket Fusion has been thoroughly

tested and has been shipped in perfect operating condition. Carefully

check the shipping carton for damage that may have occurred during

shipping. If the carton appears to be damaged, carefully inspect your

xture for any damage and be sure all equipment necessary to oper-

ate the unit has arrived intact. In the event damage has been found

or parts are missing, please contact our toll free customer support

number for further instructions. Please do not return this unit to your

dealer without contacting customer support rst.

Introduction: The Inno Pocket Fusion is a DMX intelligent Laser

& LED barrel scanner. The Inno Pocket Fusion has three operating

modes; a sound active, show mode, DMX controlled. The Inno Pocket

Fusion can operate as a fixture or in a Master/Slave constand alone -

figuration. For best results use fog or special effects smoke to enhance

the beams projections.

Customer Support: ADJ Products, LLC provides a toll free cus-

tomer support line, to provide help and to answer any question should

you encounter problems during your set up or initial operation. You

may also visit us on the web at www.adj.com for any comments or

suggestions. Service Hours are Monday through Friday 8:00 a.m. to

4:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Warning! This may cause severe eye damage. Avoid looking directly

into the light source at all times!

Inno Pocket Fusion Safety Precautions

ADJ Products, LLC - www.adj.com - Inno Pocket Fusion Instruction Manual Page 5ADJ Products, LLC - www.adj.com - Inno Pocket Fusion Instruction Manual Page 4

Safety Issues: This unit may “pop” the fuse if the maximum allotted load

is reached.

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture.

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to remove or break o the ground prong from the

electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short. Do not attempt to oper-

ate this unit if the power cord has been frayed or broken.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power cords should be routed so they are not likely to be walked on,

pinched by items placed upon or against them.

• Cleaning -The fixture should be cleaned only as recommended by the

manufacturer. See page 31 for cleaning details.

• Heat -The appliance should be situated away from heat sources such

as radiators, heat registers, stoves, or other appliances (including

amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel

when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the unit.

C. The unit has been exposed to rain or water.

D. The unit does not appear to operate normally or exhibits a

marked change in performance.

LASER RADIATION AVOID

DIRECT EYE EXPOSUR E

Maximum output <5 mW

Wavelength: 405, 532n m

Class IIIa laser produc t

This device complies with 21 CF chapter R I,

Subchapter J, or CFR 1040.10 an 1040.1 d 1

NON-INTERLOCKED HOUSING WARNING

The Inno Pocket Fusion contains high power laser devices internally.

Do not open the laser housing, due to the potential exposure to

unsafe levels of laser radiation. The laser power levels, if the unit is

opened, can cause instant blindness, skin burns and res.

STOP AND READ ALL LASER SAFETY DATA

OPERATION INSTRUCTIONS AND LASER SAFETY

The light source emitted from this product can potentially cause eye

injury if not set up and used properly. The light source emitted from a

laser is very dierent from any other light sources with which you may

be aware of. Laser light is thousands of times more concentrated

than any light from any other kind of light source. This concentration

of light can cause instant eye injuries, primarily by burning the retina

(the back of your eyeball contatining cells that are sensitive to light).

Even if you cannot feel “heat” from a laser beam, it can still poten-

tially injure or blind you or your audience. Even very small amounts

of laser beam light are potentially hazardous even at long distances.

Laser eye injuries can be sustained faster than you can blink.

Do not think that because this laser splits the laser beam into hun-

dreds of beams and that the laser beam is scanned out in high

speed, that an individual laser beam is safe for eye exposure. This

laser uses dozens of milliwatts of laser power (Class 3B levels inter-

nally) before it splits into multiple beams (Class 3R levels). Many of

the individual beams are potentially hazardous to the eyes.

Do not that because the laser light is moving, it is safe. This is not

true. Nor, do the laser beams always move. Since eye injuries can

occur instantly, it is critical to prevent even the smallest possibility of

any direct eye exposure. In the laser safety regulation, it is not legal

to aim Class 3R lasers in areas which people can get exposed. This

is true even if it is aimed below people’s faces, such as on a dance

oor.

Do not operate the laser without rst reading and understanding

all safety and technical data in this manual.

Always set up and install all laser eects so that all laser light is at

least 3 meters (9.8 feet) above the oor on which people can stand.

Inno Pocket Fusion Laser Warnings & Safety

Product specificaties

Merk:	Adj
Categorie:	Effect machine
Model:	Inno Pocket Fusion
Soort bediening:	Knoppen
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	3400 g
Breedte:	132 mm
Diepte:	340 mm
Hoogte:	177 mm
Snoerlengte:	1.5 m
Illuminance:	13300 Lux
Aantal lampen:	1 lampen
Soort lamp:	LED
Vermogen lamp:	12 W
Stroombron:	AC
LED-indicatoren:	Power,Status
Koelsysteem:	Dynamisch (door de ventilator ondersteund)
Ingebouwde microfoon:	Ja
Duurzaamheidscertificaten:	CE
Ingangsspanning:	100 - 240 V
Aantal:	1
Aanpasbare snelheid:	Ja
Pulse function:	Ja
Levensduur lamp:	50000 uur
Kleur licht:	Multi,White
Frequentie:	50/60 Hz
Kleur van laserstraal:	Groen
Geschikt voor gebruik binnen:	Ja
Stralingshoek:	5 °
Stroomverbruik (typisch):	32 W
Type product:	Disco-laserprojector & stroboscoop
Type beeldscherm:	LED
Afstandbedieningsfunctie:	Ja
Dimmer voor de lichtintensiteit:	Ja
Verlichtingsmodi:	Auto,DMX,Sound activated
Lichtregelingsprotocollen:	DMX
Dimbereik:	0 - 100 procent
DMX-ingang:	Ja
DMX-uitgang:	Ja
Aantal pinnen:	3
Baldiameter:	- "
Laserstralen:	Ja
Vermogen lasergolf (groen):	4.9 mW
Aantal DMX-kanalen:	5 kanalen