Adj Inno Color Beam Z7 Handleiding

Adj Effect machine Inno Color Beam Z7

Lees hieronder de 📖 handleiding in het Nederlandse voor Adj Inno Color Beam Z7 (14 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/14

User Instructions

Rev. 3/15

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building, and

electrical damages, injuries to any persons, and direct or indi-

rect economic loss associated with the use or reliance of any

information contained within this document, and/or as a result

of the improper, unsafe, unsucient and negligent assembly,

installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

Inno Color Beam Z7

ADJ Products, LLC - www.adj.com - Inno Color Beam Z7 User Manual Page 3ADJ Products, LLC - www.adj.com - Inno Color Beam Z7 User Manual Page 2

• RGBW Color Mixing

• 7 x 10W 4-in1 LEDs

• Color Strobe Effect

• Color Mix Effect

• Pan/Tilt Inversion

• Electronic Dimming 0-100%

• Dimmer Curve

• Built in Microphone

• DMX-512 protocol

• 14 DMX Channels

• 3 Operating Modes - Sound Active, Show Mode, or DMX Control

• Power Cord Daisy Chaining (See Section Below)

Inno Color Beam Z7 Warranty Registration

The Inno Color Beam Z7 2 year (730 days) limited warranty. carries a

Please fill out the enclosed warranty card to validate your purchase

and warranty. You may also register your product online at www.

americandj.com. All returned service items whether under warranty or

not, must be freight pre-paid and accompany a return authorization

(R.A.) umber. If the unit is under warranty you must provide an copy

of your proof of purchase invoice. Please contact ADJ customer sup-

port for a R.A. number.

Inno Color Beam Z7 Features

To optimize the performance of this product, please read these operat-

ing instructions carefully to familiarize yourself with the basic operations

of this unit. These instructions contain important safety information

regarding the use and maintenance of this unit. Please keep this manual

with the unit, for future reference.

Inno Color Beam Z7 General Instructions Inno Color Beam Z7 Introduction

Unpacking: Thank you for purchasing the Inno Color Beam Z7 by

ADJ Products, LLC. Every Inno Color Beam Z7 has been thoroughly

tested and has been shipped in perfect operating condition. Carefully

check the shipping carton for damage that may have occurred during

shipping. If the carton appears to be damaged, carefully inspect your

xture for any damage and be sure all accessories necessary to oper-

ate the unit has arrived intact. In the case damage has been found

or parts are missing, please contact our toll free customer support

number for further instructions. Do not return this unit to your dealer

without rst contacting customer support.

Introduction: The Inno Color Beam Z7 is part of ADJ’s continuing

pursuit for creating high quality affordable intelligent fixtures. The Inno

Color Beam Z7 is a high performance, DMX intelligent, moving head

LED fixture. This fixture is a great piece for retail stores, displays, mood,

architectural, interior and exterior decoration, and clubs. This unit can

be used as a stand alone, or in a Master/Slave conguration. The unit

can also be controlled via DMX controller. This fixture is suitable for

theaters, studios, retail stores, and other similar locations.

Customer Support: ADJ Products, LLC provides a toll free cus-

tomer support line, to provide set up help and to answer any question

should you encounter problems during your set up or initial operation.

You may also visit us on the web at www.adj.com for any comments

or suggestions. Service Hours are Monday through Friday 8:00 a.m. to

4:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

Inno Color Beam Z7 Power Cord Daisy Chaining

With this feature you can connect the xtures to one another

using the IEC input and output sockets. The quantity that can be

connected is 4 xtures maximum for 120V and 8 xtures maxi-

mum for 240V. After the maximum xtures has been reached you

will need to use a new power outlet. They must be the same x-

tures. DO NOT mix xtures.

ADJ Products, LLC - www.adj.com - Inno Color Beam Z7 User Manual Page 4 ADJ Products, LLC - www.adj.com - Inno Color Beam Z7 User Manual Page 5

Inno Color Beam Z7 Safety Precautions

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required volt-

age for your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 22 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

The Inno Color Beam Z7 is fully operational in two dierent mounting

positions, hanging upside-down from a ceiling or set on a at level

surface. To avoid internal damage to the unit, never mount the unit on

its side as illustrated above. Be sure this xture is kept at least 0.5m

away from any ammable materials (decoration etc.). Always use

and install the supplied safety cable as a safety measure to prevent

accidental damage and/or injury in the event the clamp fails (see next

page). Never use the carrying handles for secondary attachment.

When installing the unit, the trussing or area of installation must be

able to hold 10 times the weight without any deformation. When

installing the unit must be secured with a secondary safety attach-

ment, e.g. and appropriate safety cable. Never stand directly below

the unit when mounting, removing, or servicing the unit.

Overhead mounting requires extensive experience, including calculat-

ing working load limits, installation material being used, and perodic

safety inspection of all installation material and unit. If you lack these

qualications, do not attempt the installation yourself.

These installaiton should be checked by a skilled person once a year.

Inno Color Beam Z7 Installation

Product specificaties

Merk:	Adj
Categorie:	Effect machine
Model:	Inno Color Beam Z7
Soort bediening:	Knoppen
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	7500 g
Breedte:	167 mm
Diepte:	262 mm
Hoogte:	340 mm
Aantal lampen:	7 lampen
Soort lamp:	LED
Vermogen lamp:	10 W
Stroombron:	AC
Ingangsspanning:	100 - 230 V
Aantal:	1
Levensduur lamp:	50000 uur
Kleur licht:	Multi
Frequentie:	50 - 60 Hz
Geschikt voor gebruik binnen:	Ja
Stralingshoek:	13 °
XLR in:	Ja
Stroomverbruik (typisch):	104 W
Type product:	Disco-spotlight
Type beeldscherm:	LED
Verlichtingsmodi:	DMX, Sound activated
Lichtregelingsprotocollen:	DMX
Dimbereik:	0 - 100 procent
Ingebouwde macro's:	Ja
Baldiameter:	- "
Aantal DMX-kanalen:	14 kanalen