Adj Ikon IR Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Adj Ikon IR (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
User Instructions
Rev. 5/16
Ikon IR
©2015 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby dis-
claim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or
indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a
result of the improper, unsafe, unsucient and negligent as-
sembly, installation, rigging, and operation of this product.
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
ADJ Products, LLC - www.adj.com - Ikon IR User Manual Page 4
Ikon IR Operation
Introduction: The ADJ Ikon IR is a rotating gobo projector. This fixture
is designed for mobile DJ’s, clubs, bands, roller rinks and any arena
that requires a compact, light weight, easy to use unit. This fixture is
also suitable for theaters, studios, retail stores, and other similar loca-
tions.
Power Supply: The ADJ Ikon IR contains a automatic voltage switch,
which will auto sense the voltage when it is plugged into the power
source. With this switch there is no need to worry about the correct
power voltage, this unit can be plugged in anywhere.
Operation: This fixture is designed to operate as a stand alone, rotat-
ing gobo projector, there is no need of a DMX controller. It has been
tested and there is no assembly necessary. The kon IR is ready to I
be plugged in out of the box. When this fixture is plugged in, the unit
will project the included gobo. Using the bottom knob located at the
back of the unit, you can make the control the gobo rotation speed
and rotation direction. The top knob will let you control output inten-
sity.
After plugging in the unit and there is no LED output check the fuse.
If the fuse has not popped, please contact customer support for fur-
ther instructions. This fixture features a light weight case design and
an adjustable hanging bracket.
ADJ Products, LLC - www.adj.com - Ikon IR User Manual Page 5
The infrared remote gives you control of various functions (See UC IR
below). To control the fixture you must aim the remote at the front of
the fixture and be no more than 30 feet away.
The Ikon IR comes with the Airstream IR remote transmitter. The
transmitter plugs into the headphone jack of your iOS phone or
tablet. To control your IR fixture you must raise the volume to the
maximum on your iOS phone or table and aim the transmitter at the
front of the fixture and be no more than 15 feet away. After you have
purchased the Airstream IR transmitters, the app is a free download
from the app store for your iOS phone or tablet. The app comes with
3 pages of control depending on the IR fixture you are using. Please
see below for IR functions including the corresponding app page.
Works with App page 1.
STAND BY - Pressing this button will blackout the fixture.
FULL ON -This button is invalid for this fixture.
FADE/GOBO - Press this button to activate rotation.
“DIMMER +” and “DIMMER -” - Use these buttons to adjust the out-
put intensity.
1-9 - After pressing the FADE/GOBO button, these buttons will allow
you to select rotation direction and rotation speed. Press buttons 1-4
to select clockwise rotation and speed #1 button being the slowest
and #4 the fastest. Press buttons 6-9 to select counter-clockwise
rotation and speed #6 button being the slowest and #9 the fastest.
Press the #5 button to stop rotation.
SOUND ON & OFF - These button’s are invalid for this fixture.
SHOW - This button is invalid for this fixture.
Ikon IR ADJ UC IR Control
The Ikon IR comes with a replaceable gobo. This gobo can be inter-
changed at any time and allows you to customize your system.
To replace gobo;
1. Unscrew the two screws located at the bottom that secure the
gobo housing.
2. Remove the gobo housing.
3. Once the gobo housing has been removed, remove the retaining
ring that holds the gobo in. This can easily be done using needle
nose pliers.
4. Remove and replace the gobo with your desired replacement.
Reinsert the retainer ring, and make sure the ring rests firmly
against the gobo.
5. Slide the gobo assembly back into place, and secure the housing
with two screws.
Ikon IR Gobo Replacement
Ikon IR Warranty
MANUFACTURERS LIMITED WARRANTY
A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products
to be free of manufacturing defects in material and workmanship for a prescribed period from
the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the
product is purchased within the United States of America, including possessions and
territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable
evidence, at the time service is sought.
B. Fo r w a rr a nt y s er v ic e y ou m u st o bt a in a Re t u r n Au t h o r i z at i on n umb e r ( R A # )
before sending back the productplease contact ADJ Products, LLC Service Department
at 8 00-322-6 3 3 7 . Se n d th e produc t only to th e ADJ Pr o d u c t s , LLC fa c t o r y. Al l
shi ppi n g cha rges mu st be pr e -pa id. If th e req u est e d re p air s or se r vic e (in clu d ing
parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return
shipping charges only to a designated point within the United States. If the entire instrument is
sent, it must be shipped in its original package. No accessories should be shipped with the product. If
any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for
loss of or damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is modified in any
manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the
product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior
written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because
not properly maintained as set forth in the instruction manual.
D. This is not a service contract, and this warranty does not include maintnance, cleaning or periodic check
up. During the period specified above, ADJ Products, LLC will replace defective parts at its expense
with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by
reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this
warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole
discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August
15, 2012, and bear indentifying marks to that effect.
E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products
without any obligation to include these changes in any products theretofore manufactured.
No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with
products described above. Except to the extent prohibited by applicable law, all implied warranties made
by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness,
are limited in duration to the warranty period set forth above. And no warranties, whether expressed or
implied, including warranties of merchantability or fitness, shall apply to this product after said period
has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is
expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or
damage, direct or consequential, arising out of the use of, or inability to use, this product.
This warranty is the only written warranty applicable to ADJ Products, LLC Products and
supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore
published.
MANUFACTURER’S LIMITED WARRANTY PERIODS:
 •LightingProducts=1-year(365days)LimitedWarranty(Such as: Special Effect Lighting, Intelligent
Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing,
Lighting Stands etc. excluding LED and lamps)
 •LaserProducts=1Year(365Days)LimitedWarranty(excluding laser diodes which have a 6 month
limited warranty)
 •L.E.D.Products=2-year(730days)LimitedWarranty(excluding motors, PCB boards, and power
supplies, which have a 1-year (365 day Limited Warranty) batteries which have a 180 day limited war-
ranty). Only the L.E.D.s carry a 2-year warranty (excludingStarTecSerieswhichacarriesa1Year
LimitedWarranty)
•ADJDMXControllers=2Year(730Days)LimitedWarranty(excluding faders and tact switches)
ADJ Products, LLC - www.adj.com - Ikon IR User Manual Page 8 ADJ Products, LLC - www.adj.com - Ikon IR User Manual Page 9
Ikon IR Notes


Product specificaties

Merk: Adj
Categorie: Niet gecategoriseerd
Model: Ikon IR
Kleur van het product: Zwart
Gewicht: 3000 g
Breedte: 236 mm
Diepte: 236 mm
Hoogte: 215 mm
Soort lamp: LED
Vermogen lamp: 80 W
Stroombron: AC
Ingangsspanning: 100 - 240 V
Aantal: 1
Levensduur lamp: 50000 uur
Kleur licht: Wit
Kleurtemperatuur: 7500 K
Frequentie: 50 - 60 Hz
Geschikt voor gebruik binnen: Ja
Stralingshoek: 25 °
Afstandsbediening inbegrepen: Ja
Stroomverbruik (typisch): 74 W
Type product: Disco-spotlight
Baldiameter: - "
Gobopatronen aantal: 4

Heb je hulp nodig?

Als je hulp nodig hebt met Adj Ikon IR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Adj

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd