Adj Flat Par QA12XS Handleiding

Adj Effect machine Flat Par QA12XS

Lees hieronder de 📖 handleiding in het Nederlandse voor Adj Flat Par QA12XS (14 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 61 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/14

User Instructions

3/15

FLAT PAR QA12XS

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building, and

electrical damages, injuries to any persons, and direct or indi-

rect economic loss associated with the use or reliance of any

information contained within this document, and/or as a result

of the improper, unsafe, unsucient and negligent assembly,

installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 3

• Multi-Colors

• Five Operating Modes

• Electronic Dimming 0-100%

• Built in Microphone

• DMX-512 protocol

• 3-Pin DMX Connection

• 8 DMX Modes: 1 Channel Mode, 2 Channel Mode, 3 Channel

Mode, 4 Channel Mode, 5 Channel Mode, 6 Channel Mode, 7

Channel Mode, and 8 Channel Mode.

• Snoot Frame Included to help limit unwanted light exposure

• ADJ LED RC 2 compatiable (Not Included)

• Power Cord Daisy Chain (See page 11)

Flat Par QA12XS Warranty Registration

Flat Par QA12XS Features

To optimize the performance of this product, please read these operat-

ing instructions carefully to familiarize yourself with the basic operations

of this unit. These instructions contain important safety information

regarding the use and maintenance of this unit. Please keep this manual

with the unit, for future reference.

Flat Par QA12XS General Instructions

The Flat Par QA12XS 2 year limited warranty. Please fill out carries a

the enclosed warranty card to validate your purchase. All returned

service items whether under warranty or not, must be freight pre-paid

and accompany a return authorization (R.A.) number. The R.A. number

must be clearly written on the outside of the return package. A brief

description of the problem as well as the R.A. number must also be

written down on a piece of paper included in the shipping carton. If

the unit is under warranty, you must provide a copy of your proof of

purchase invoice. You may obtain a R.A. number by contacting our

customer support team on our customer support number. All pack-

ages returned to the service department not displaying a R.A. number

on the outside of the package will be returned to the shipper.

Flat Par QA12XS Introduction

ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 2

Unpacking: Thank you for purchasing the Flat Par QA12XS by ADJ

Products, LLC . Every Flat Par QA12XS has been thoroughly tested ®

and has been shipped in perfect operating condition. Carefully check

the shipping carton for damage that may have occurred during ship-

ping. If the carton appears to be damaged, carefully inspect your x-

ture for any damage and be sure all accessories necessary to operate

the unit has arrived intact. In the case damage has been found or parts

are missing, please contact our toll free customer support number for

further instructions. Do not return this unit to your dealer without rst

contacting customer support.

Introduction: The ADJ Flat Par QA12XS is part of a continuing pur-

suit to create high quality intelligent lighting. The Flat Par QA12XS is a

DMX intelligent, high powered LED par fixture. This xture can be used

in a stand alone mode or connected in a Master/Slave conguration.

This wash has five operating modes: Sound Active mode, Auto mode,

RGBA mode, Static Color mode and DMX control mode.

Customer Support: ADJ Products, LLC provides a customer sup-

port line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.adj.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (323) 582-3322

Fax: (323) 582-3108

E-mail: support@AmericanDJ.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

Flat Par QA12XS Safety Precautions

ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 4

Power Supply: The ADJ Flat Par QA12XS contains a automatic volt-

age switch, which will auto sense the voltage when it is plugged into

the power source. With this switch there is no need to worry about the

correct power voltage, this unit can be plugged in anywhere.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used as a form of communication between intelligent fixtures

and controllers. A DMX controller sends DMX data instructions from

the controller to the fixture. DMX data is sent as serial data that trav-

els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR ter-

minals located on all DMX fixtures (most controllers only have a DATA

“OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of

dierent manufactures to be linked together and operate from a single

controller, as long as all xtures and the controller are DMX compli-

ant. To ensure proper DMX data transmission, when using several

DMX fixtures try to use the shortest cable path possible. The order

in which fixtures are connected in a DMX line does not influence the

DMX addressing. For example; a fixture assigned a DMX address of 1

may be placed anywhere in a DMX line, at the beginning, at the end,

or anywhere in the middle. When a fixture is assigned a DMX address

of 1, the DMX controller knows to send DATA assigned to address 1

to that unit, no matter where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX Operation):

The Flat Par QA12XS can be controlled via DMX-512 protocol. The Flat

Par QA12XS has 8 DMX channel modes, please see pages 9-10 for the

dierent DMX modes. The DMX address is set on the back panel of

the Flat Par QA12XS. Your unit and your DMX

controller require a standard 3-pin XLR connec-

tor for data input and data output (Figure 1). We

recommend Accu-Cable DMX cables. If you are

making your own cables, be sure to use standard

110-120 Ohm shielded cable (This cable may be

purchased at almost all pro lighting stores). Your

cables should be made with a male and female

XLR connector on either end of the cable. Also

remember that DMX cable must be daisy chained

and cannot be split.

ADJ Products, LLC - www.adj.com - Flat Par QA12XS User Manual Page 5

Flat Par QA12XS Set Up

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 22 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Figure 1

Product specificaties

Merk:	Adj
Categorie:	Effect machine
Model:	Flat Par QA12XS
Soort bediening:	Knoppen
Kleur van het product:	Zwart
Ingebouwd display:	Ja
Gewicht:	3200 g
Breedte:	280 mm
Diepte:	328 mm
Hoogte:	115 mm
Snoerlengte:	1.8 m
Illuminance:	4656 Lux
Aantal lampen:	12 lampen
Soort lamp:	LED
Vermogen lamp:	5 W
Stroombron:	AC
Meegeleverde kabels:	AC
Land van herkomst:	Verenigde Staten
Ingangsspanning:	100 - 240 V
Aanpasbare snelheid:	Ja
Levensduur lamp:	50000 uur
Kleur licht:	Amber, Blue, Green, Red
Frequentie:	50/60 Hz
Ophangsysteem voor aan de muur:	Ja
Geschikt voor gebruik binnen:	Ja
Stralingshoek:	25 °
XLR in:	Ja
Stroomverbruik (typisch):	80 W
Type beeldscherm:	LED
Afstandbedieningsfunctie:	Ja
Dimmer voor de lichtintensiteit:	Ja
Verlichtingsmodi:	Auto, DMX, Sound activated
Lichtregelingsprotocollen:	DMX
DMX-ingang:	Ja
DMX-uitgang:	Ja
Aantal pinnen:	3
Baldiameter:	- "
Aantal DMX-kanalen:	8 kanalen
Minimumhoeveelheid DMX-kanalen:	1 kanalen