Adj Entourage Handleiding

Adj Effect machine Entourage

Lees hieronder de 📖 handleiding in het Nederlandse voor Adj Entourage (10 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/10

User Instructions

8/16

Caution: Fog Machines may set o Smoke Alarms!

EntouragE

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building, and

electrical damages, injuries to any persons, and direct or indi-

rect economic loss associated with the use or reliance of any

information contained within this document, and/or as a result

of the improper, unsafe, unsucient and negligent assembly,

installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you!

• Be sure to save the packing carton in the unlikely event the unit

may have to be returned for service

• Do not spill water or other liquids into or on to your fogger. Be

sure that all the fog uid is kept inside the uid reservoir

• Be sure that the local power outlet match that or the required

voltage for your fog machine

• Do not remove the top cover under any conditions. There are no

user serviceable parts inside

• Disconnect the unit’s main power when left unused for long peri-

ods of time

• Never connect this unit to a dimmer pack

• Do not attempt to operate this unit, if it becomes damaged in anyway

• Never operate this unit when it’s cover is removed

• To reduce the risk of electrical shock or re, do not expose this

unit rain or moisture

• Do not attempt to operate this unit if the power cord has been fray-

ed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the

risk of electrical shock and re in case of an internal short

• Disconnect from main power before making any type of connection

• Never block the ventilation holes. Always be sure to mount this

unit in an area that will allow proper ventilation. Allow about 6”

(15cm) between this device and a wall

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties

• Always mount this unit in a safe and stable matter

• Please route your power cord out of the way of foot trac. Power

cords should be routed so they are not likely to be walked on,

pinched by items placed upon or against them

• The unit should only be serviced by qualified service personnel

when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the unit.

C. The unit has been exposed to rain or water.

D. The appliance does not appear to operate normally or

exhibits a marked change in performance.

Entourage Safety Precautions

ADJ Products, LLC - www.adj.com - Entourage Instruction Manual Page 3

Introduction: Congratulations, you have just purchased one of the

most reliable fog machines on the market today! The Entourage faze

machine have been designed to perform reliably for years when the

guidelines in this booklet are followed. Please read and understand the

instructions in this manual carefully and thoroughly before attempting

to operate this unit. These instructions contain important information

regarding safety during use and maintenance.

Customer Support: ADJ Products, LLC provides a toll free customer

support line, to provide set up help and to answer any question should

you encounter problems during your set up or initial operation. You

may also visit us on the web at www.adj.com for any comments or

suggestions. For service related issue please contact ADJ Products,

LLC. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

Do not discard the shipping cartoon in the trash. Please recycle when

ever possible.

SAFETY ISSUES:

NEVER POINT OR AIM A FOG MACHINE TOWARDS PEOPLE OR

THEIR CLOTHING. THIS UNIT EMITS HOT VAPOR AND SHOULD

BE USED WITH THE SAME CARE THAT YOU WOULD OBSERVE

WHEN USING AN ELECTRIC KETTLE OR IRON.

Entourage Introduction

Please Note: Specications and improvements in the design of

this unit and this manual are subject to change without any prior

written notice.

ADJ Products, LLC - www.adj.com - Entourage Instruction Manual Page 2

ADJ Products, LLC - www.adj.com - Entourage Instruction Manual Page 4 ADJ Products, LLC - www.adj.com - Entourage Instruction Manual Page 5

Power Supply: Before plugging your unit in, be sure the source volt-

age in your area matches the required voltage for your ADJ Entourage.

The ADJ Entourage is available in a 120v and 230v version. Because

line voltage may vary from venue to venue, you should be sure your

unit voltage matches the wall outlet voltage before attempting to oper-

ate you xture.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used as a form of communication between intelligent fixtures

and controllers. A DMX controller sends DMX data instructions from

the controller to the fixture. DMX data is sent as serial data that trav-

els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR ter-

minals located on all DMX fixtures (most controllers only have a DATA

“OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of

dierent manufactures to be linked together and operate from a single

controller, as long as all xtures and the controller are DMX compli-

ant. To ensure proper DMX data transmission, when using several

DMX fixtures try to use the shortest cable path possible. The order

in which fixtures are connected in a DMX line does not influence the

DMX addressing. For example; a fixture assigned a DMX address of 1

may be placed anywhere in a DMX line, at the beginning, at the end,

or anywhere in the middle. When a fixture is assigned a DMX address

of 1, the DMX controller knows to send DATA assigned to address 1

to that unit, no matter where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX Operation):

The Entourage can be controlled via DMX-512 protocol. The Entourage

has 3 DMX channel modes, 1 channel, 2 channel, and 4 channel. The

DMX address is set on the back panel. Your unit and your DMX con-

troller require a standard 3-pin XLR connector for

data input and data output (Figure 1). We recom-

mend Accu-Cable DMX cables. If you are making

your own cables, be sure to use standard 110-120

Ohm shielded cable (This cable may be purchased

at almost all pro lighting stores). Your cables should

be made with a male and female XLR connector on

either end of the cable. Also remember that DMX

cable must be daisy chained and cannot be split.

Figure 1

Notice: Be sure to follow gures two and three when making your own

cables. Do not use the ground lug on the XLR connector. Do not con-

nect the cable’s shield conductor to the ground lug or allow the shield

conductor to come in contact with the XLR’s outer casing. Grounding

the shield could cause a short circuit and erratic behavior.

DMX512 IN

3-PIN XLR

DMX +

DMX -

COMMON

DMX512 OT

3-PIN XLR

Figure 2

Figure 3

1 Ground 1 Ground

XLR Male Socket

XLR Pin Conguration

3 Hot

2 Cold 2 Cold

3 Hot

XLR Female Socket

Pin 3 = Data True (positive)

Pin 2 = Data Compliment (negative)

Pin 1 = Ground

Special Note: Line Termination.

When longer runs of cable are

used, you may need to use a terminator on the last unit to avoid erratic

behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is con-

nected between pins 2 and 3 of a male XLR connector (DATA + and

DATA -). This unit is inserted in the female XLR connector of the last

unit in your daisy chain to terminate the line. Using a cable terminator

(ADJ part number Z-DMX/T) will decrease the possibilities of erratic

behavior.

Termination educes signalr errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

Figure 4

5-Pin XLR DMX Connectors.

Some manufactures use 5-pin DMX-

512 data cables for DATA transmission in place of 3-pin. 5-pin DMX

xtures may be implemented in a 3-pin DMX line. When inserting stan-

dard 5-pin data cables in to a 3-pin line a cable adaptor must be used,

these adaptors are readily available at most electric stores. The chart

below details a proper cable conversion.

Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)

Pin 1

Do Not Use

Pin 3

Pin 2

Pin 1

Pin 3

Pin 2

Not Used

Data True (+ signal)

Data Compliment (- signal)

Ground/Shield

3-Pin XLR to 5-Pin XLR Conversion

Entourage DMX Information Entourage DMX Information

Product specificaties

Merk:	Adj
Categorie:	Effect machine
Model:	Entourage

Heb je hulp nodig?

Als je hulp nodig hebt met Adj Entourage stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Effect machine Adj

Adj ELEMENT QA Handleiding

17 Augustus 2024

Adj Mini Spot LED Handleiding

26 Februari 2024

Adj COB Cannon Wash Handleiding

22 Juni 2023

Adj Focus Spot 5Z Handleiding

15 Juni 2023

Adj Encore FR50Z Handleiding

4 Juni 2023

Adj 5PX HEX Pearl Handleiding

2 Juni 2023

Adj Entour Faze Jr Handleiding

27 Mei 2023

Adj Encore Burst UV IP Handleiding

26 Mei 2023

Adj Ultra HEX PAR 3 Handleiding

26 Mei 2023

Adj Mega Hex Par Handleiding

23 Mei 2023

Handleiding Effect machine

Nieuwste handleidingen voor Effect machine

Boss CEB-3 Handleiding

30 November 2024

Elation Crisp Max Handleiding

20 November 2024

Karma TM WASH70 Handleiding

19 November 2024

Showtec LED Octostrip Set MKII Handleiding

16 November 2024

American DJ VF Flurry Handleiding

15 November 2024

Westinghouse WSnow18T Handleiding

7 November 2024

Westinghouse WSnow11SD Handleiding

7 November 2024

Westinghouse W24V8AH Handleiding

7 November 2024

Westinghouse WSnow22 Handleiding

7 November 2024

Westinghouse WSnow22T Handleiding

7 November 2024