Acson SEQ-0501 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Acson SEQ-0501 (21 pagina's) in de categorie Airconditioner. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21
1
SEQUENTIAL CONTROLLER
for PACKAGED AIR CONDITIONER (PAC)
CONTRÔLEUR SÉQUENTIEL
pour CLIMATISEUR
FOLGESTEUERUNG
für VERPACKTE KLIMAANLAGE
REGOLATORE SEQUENZIALE
per CONDIZIONATORI ASSEMBLATI (PAC)
REGULADOR SECUENCIAL
para ACONDICIONADOR DE AIRE EMBALADO (PAC)
УСТРОЙСТВО ЦИКЛОВОГО УПРАВЛЕНИЯ
для КОМБИНИРОВАННОГО КОНДИЦИОНЕРА (КК)
Part No.: A08019013037 OM-SEQ-0501
DISPLAY / AFFICHAGE / ANZEIGE / DISPLAY /
INDICACIÓN / ДИСПЛЕЙ
2
A : Time display
B : Error indication
C : Compressor running display (up to 4 compressors)
D : Key lock display
E : Heater display (up to 2 heaters)
F : Energy saving mode display
G : Compressor defrost cycle display (up to 4 compressors)
H : Operation mode display
I : Temperature set display
2. Operating Guide
2.1 ON/OFF key
Press once to start the air conditioning unit.
Press again to stop the unit.
The operation lamp next to the key lights up and goes off respectively when the unit is
running or not running.
Caution
: In the case when the ON/OFF key is pressed immediately after the opera-
tion is stopped, the unit will not restart until 3 minutes later to protect the compressor.
2.2 Selecting Operation Mode
Press the MODE key to select the type of operating mode. Consecutive press of the
key switches the operation over
“COOL
,
“HEAT”
,
“AUTO”
and
“FAN”
.
2.3 SAVE Mode
Press the SAVE key to select the energy saving function. This option is only available
for
“COOL
,
“HEAT”
and
“AUTO”
modes.
2.4 Auxiliary Electric Heater
If the
“HEAT”
mode provides insufficient heating to a room even at the highest
temperature setting (30°C), press the HEATER key to activate the auxiliary electric
heater. For models with two heaters, consecutive press of the key allows the
selection of one or both heaters active.
2.5 Temperature Setting
To set the desired room temperature, press or to increase or decrease
the set temperature in the range of 16°C to 30°C.
Press both and simultaneously to toggle between °C and °F setting.
2.6 Time Setting
Real time Clock
Press the CLOCK key once to activate set clock mode.
Press again to disable set clock mode.
Under set clock mode, the time of the present day can be set by pressing the
respective MINUTE, HOUR and DAY key.
7-days timer
Press the ON TIMER key to activate auto-ON timer mode. Under this mode, press the
respective MINUTE, HOUR and DAY key to select the time of the week when the air-
conditioning unit is to automatically start running. Press the ON TIMER key again to
save the setting.
3
E01 Require manual reset
E02 Compressor 1 high temperature (overload)
E03 Compressor 2 high temperature (overload)
E04 Compressor 3 high temperature (overload)
E05 Compressor 4 high temperature (overload)
E06 Compressor 1 high pressure trip / contact open
E07 Compressor 2 high pressure trip / contact open
E08 Compressor 3 high pressure trip / contact open
E09 Compressor 4 high pressure trip / contact open
E10 Compressor 1 trip / low R-22 / outdoor abnormal
E11 Compressor 2 trip / low R-22 / outdoor abnormal
E12 Compressor 3 trip / low R-22 / outdoor abnormal
E13 Compressor 4 trip / low R-22 / outdoor abnormal
E14 Room sensor short
E15 Room sensor open
E16 Indoor coil sensor 1 short
E17 Indoor coil sensor 2 short
E18 Indoor coil sensor 3 short
E19 Indoor coil sensor 4 short
E20 Indoor coil sensor 1 open
E21 Indoor coil sensor 2 open
E22 Indoor coil sensor 3 open
E23 Indoor coil sensor 4 open
E24 Outdoor coil sensor 1 short
E25 Outdoor coil sensor 2 short
E26 Outdoor coil sensor 3 short
E27 Outdoor coil sensor 4 short
E28 Outdoor coil sensor 1 open
E29 Outdoor coil sensor 2 open
E30 Outdoor coil sensor 3 open
E31 Outdoor coil sensor 4 open
E32 Compressor 1 de-ice
E33 Compressor 2 de-ice
E34 Compressor 3 de-ice
E35 Compressor 4 de-ice
ENGLISH
4. Installation Of LCD Remote Controller
4.1 Accessories
The following accessories are included together with this manual. If any part is
missing, contact your dealer immediately.
1Remote controller
Press the OFF TIMER key to activate auto-OFF timer mode. Under this mode, press
the respective MINUTE, HOUR and DAY key to select the time of the week when the
air-conditioning unit is to automatically start running. Press the ON TIMER key again
to save the setting.
Then to activate the 7-days timer, press and hold the TIMER ACTIVE key until the
word
“TIMER ACTIVE”
appears on the LCD screen. Repeat the same step to disable
the 7-days timer.
2.7 Other Function
Key Lock
Press the MINUTE key 3 times consecutively to activate the key lock. A
“KEY LOCK”
symbol will appear on the LCD screen. At this point, only the ON/OFF key is valid.
To disable the key lock, again press the MINUTE key 3 times consecutively.
Test run
Press the TEST key 2 times consecutively to test run the unit.
3. Error Code
When the system is on and an error occurs, the ON/OFF LED on the LCD panel will
blink and an error code is shown. When the system is off and there is a thermistor
error, the ON/OFF LED is off but the error code is still displayed. Each error code
represents different message as below:


Product specificaties

Merk: Acson
Categorie: Airconditioner
Model: SEQ-0501

Heb je hulp nodig?

Als je hulp nodig hebt met Acson SEQ-0501 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Airconditioner Acson

Handleiding Airconditioner

Nieuwste handleidingen voor Airconditioner