Acoustic Energy Radiance Handleiding

Acoustic Energy Radiance

Lees hieronder de đź“– handleiding in het Nederlandse voor Acoustic Energy Radiance (8 pagina's) in de categorie . Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
series
Owners Manual
radiance
2
Introduction
Thank you for purchasing these Acoustic Energy Radiance
Series loudspeakers.
These high-performance loudspeakers utilise some of the
nest materials and most advanced technology available.
They are voiced according to Acoustic Energy’s core values
of musicality, timing, neutrality and, above all - realistic
reproduction of the source material.
More than any other Hi-Fi product, speakers are sensitive
to installation so please take a little time to read this manual
and follow, where practical, the guidelines it contains.
Careful installation will help ensure that your Radiance
speakers perform optimally. Should you have any questions
not covered here please take a look at the support section on
our website - www.acoustic-energy.co.uk
Radiance Series loudspeakers should provide years of
maintenance-free enjoyment and are guaranteed against
defects in materials, manufacture and workmanship for three
years from the date of purchase. For full details please refer
to the Warranty section on page 5 of the manual.
This manual covers all Radiance Series except Radiance Sub.
Technology
The Radiance Series loudspeakers incorporate various
advanced technologies, including -
· Aluminium drive units
· Ring-radiator tweeters
· Curved, acoustically braced cabinets
· DXT® lens
Most interesting of these features (and a rst for Acoustic Energy)
is the DXT® lens. This adjusts dispersion from the tweeters to
match that of the mid/bass drivers.
The lens improves two components of the sound -
Firstly, integration between high and low frequencies is more
natural and seamless than in conventional speakers. This is crucial
for realistic reproduction of the midrange - the human voice in
particular.
Secondly, the lens creates far better integration of sound into the
room environment. This integrated sound is more expansive and
“live” than you would usually hear from a conventional speaker,
while remaining easy to listen to. Detail is abundant but always
part of the musical whole.
3
Installation
Handling - Loudspeakers are relatively delicate, precision
engineered products that can be damaged by inappropriate
handling. Please take care when unpacking or moving them
not to touch any of the drivers. Damage to a driver will at
best degrade performance and at worst result in complete
failure.
Set Up - Radiance one - Ideally the Radiance ones should be
mounted on dedicated speaker stands tall enough to place
the tweeter at, or slightly above ear level from a seated listening
position. The use of wall mounting via brackets or shelf/cabinet
placement are viable alternatives, though performance in these
locations may be reduced from the optimum.
Radiance two/three - As oorstanding speakers both models
require placement clear of room boundaries and should be
mounted on spiked feet (supplied) for best performance. If
spikes are inappropriate for your oor covering, metal
protection pads, coins for example, may be used between the
spike and the oor.
Radiance centre - For use in home theatre systems either
directly above or below the screen. The centre can be stood
on a furniture unit (using supplied rubber feet), integrated
within a screen stand, mounted on a dedicated speaker stand
or on a wall using appropriate bracket hardware.
Connecting
Each Radiance Series speaker has two pairs of binding-post
terminals. These terminals can accept either stripped wire, spade
connectors, or 4mm plugs. Each of these termination methods are
potentially equally eective and the choice is likely to be inuenced
by the type of speaker cable used. Your dealer, distributor or cable
manufacturer will be able to oer advice.
The two pairs of binding posts are mechanically joined via gold-
plated bridging links and can be single or bi-wired.
Single-wiring
Simply connect the speaker cable to the correct polarity terminal on
the speaker (positive - red, negative - black). Either top or bottom
terminals can be used. Ensure the speaker cable is attached to the
amplier in the correct polarity before use. (Note - you will have two
unused terminals, one red, one black on the speaker when wired this
way, this is correct when the bridging links are in place)
Bi-wiring
To bi-wire you will need to unscrew the caps on the binding posts
and remove the bridging links before connection. There are multiple
ways to bi-wire/bi-amp a speaker, consult your Hi-Fi dealer for the
best advice on how to do this with your particular system. They will
also be able to advise on cable choice to best match your system.


Product specificaties

Merk: Acoustic Energy
Categorie:
Model: Radiance

Heb je hulp nodig?

Als je hulp nodig hebt met Acoustic Energy Radiance stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Acoustic Energy

Handleiding

Nieuwste handleidingen voor