Acoustic Energy Aegis Evo Handleiding

Acoustic Energy Aegis Evo

Lees hieronder de 📖 handleiding in het Nederlandse voor Acoustic Energy Aegis Evo (5 pagina's) in de categorie . Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

Owner’s manual

Congratulations on choosing the Acoustic Energy AEGIS EVOLUTION

Series — a range of powerful loudspeakers which feature metal

diaphragm technology and are capable of outstanding

performance. Please take a few moments to read this manual. The

advice it contains will enable you to get the very best performance

out of your Acoustic Energy loudspeakers.

The AEGIS EVOLUTION speakers utilise metal cone bass and mid-bass drive

unit technology, proven in the AE Reference series. The ultra rigid ceramic

layered alloy cones ensure pure piston action and also acts as a heat sink for

the bonded voice coil. These features provide exceptional clarity, transparency,

dynamics and power handling. The tweeters, or treble drivers, employ a high-

quality silk dome unit, built on a metal chassis, integrating smoothly with the

rest of the system. All drive units are fully magnetically shielded so that the

speakers can be used in close proximity to a TV screen or monitor for AV

applications. The AEGIS EVOLUTION loudspeakers use quality OFC internal

wiring, which enhances detail and transparency, and may be bi –wired as

desired.

Experiment with the best placement in the room to achieve a full, yet clean

bass response, a natural sounding mid range and a balanced spacious stereo

image. Trust your judgement and ears. For best stereo imaging the speakers

should be about as far apart as they are from the listening position. The

speakers should be equally distant from the listener[s] and should not be too

close to large items of furniture which may cause sound reflections. Ideally they

should be about 1m from the side walls and about 0.7m from the wall behind.

The spacing of the listening seat to the back wall may be quite critical for a

smooth deep bass.

Aegis Evo One

The AEGIS EVO ONE is best heard with the tweeters at, or just above, ear

height when the listener is seated. For serious listening the grilles are best

removed when the greatest clarity results.

Rigid support is essential for the speaker to develop its full detail and dynamic

performance. Good quality metal stands fitted with spikes, cones or other

methods of firm mounting are recommended. Stand mounting, placed as

recommended gives best stereo separation and depth.

If AEGIS EVO ONEs are shelf mounted, the support must be firm; cones, or felt

pads are recommended beneath the cabinets to reduce vibration coupling to

the support. Good quality wall brackets may be used, designed for speakers of

this size and weight. If wall mounted keep 1.5m from the side walls and angle

the speaker towards the listener area if possible; note that a corner position is

the poorest sounding for any speaker even if it is the loudest. AE can supply

damping plugs for the rear port to moderate the bass on request.

Positioning

Introduction

Aegis Evo Three

Please unpack your AEGIS EVO THREE carefully on a carpet or similar surface.

Locate the plinths and fittings and, having carefully inverted the speaker, screw

the plinth to the base of the cabinet using the screws and pilot holes provided.

Please ensure that you have firmly screwed the plinth to the cabinet, failure to

do this will degrade performance.

There is a mass-loading compartment at the bottom of the cabinet.

You may choose to fill it with washed, fully dried non salt contaminated sand,

or suitable metal chips, via the hole at the back. A plastic bung is provided to

seal the cabinet. Mass loading will significantly improve the performance of

the speaker. If you decide not to mass-load the speakers, we still recommend

fitting the plastic bung to avoid unwanted resonance. Be aware that the

plastic bung has not been designed to be removable after insertion. You may

wish to use a temporary removable plug until you have made your decision

High tensile 8mm floor spikes and lock nuts are provided for use with the

plinth. This guarantees optimum coupling to the floor particularly in rooms

fitted with carpet. The spikes penetrate the carpet and couple the speaker

firmly to the floor structure below. The spikes (with lock nut screwed down to

the knurled part of the spike) should be fitted to the threaded insert in the

underside of the plinth while the speaker is still inverted. The speaker is now

ready for installation.. Any final adjustment of spikes to eliminate cabinet

wobble can now be made using a spirit level if required. The lock nuts should

be firmly tightened when the final adjustments to cabinet position and

alignment have been made and there is no rocking.

Closeness to room boundaries has a major impact on the low frequency

performance. The speakers should be kept away from corners (which will

produce bass booming) and they should be 0.6 m from the back walls, and a

greater distance e.g. 1m from the side walls.

Positioning

Aegis Evo Centre

Position the AEGIS EVO CENTRE either immediately above or below the

television screen, whichever places the speaker nearest ear level when listening.

Line the front of the speaker approximately in line with the plane of the screen.

Fix the four self-adhesive foam-rubber feet to the base of the speaker to protect

both the surface on which the speaker stands and the underside of the speaker.

The feet also absorb vibration, which is especially important if placing the

speaker directly onto a thin television cabinet. If placement is on top of the

television, be aware that the flat surface depth may be limited, so ensure the

feet are placed accordingly.

When fine-tuning the Aegis EVO system, adjust the levels of the left, centre and

right channel speakers to give an even movement as sound images pan across

the screen. Most Home Theatre systems also include calibration sounds to help

set the right balance for the three front channels. The EVO Centre may also be

used as high powered surround channel speakers, mounted vertically, since

their particular ‘vocal precision’ tuning also suits them for boundary placement

on a wall.

Check that your amplifier is switched off before installing your loudspeakers. Failure

to do so may result in speaker or amplifier damage if the amplifier is energised and

delivering any power. The diagrams illustrate the connection for one loudspeaker

only.

Product specificaties

Merk:	Acoustic Energy
Categorie:
Model:	Aegis Evo

Heb je hulp nodig?

Als je hulp nodig hebt met Acoustic Energy Aegis Evo stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Acoustic Energy

Acoustic Energy AE WiFi Radio Handleiding

19 Augustus 2022

Acoustic Energy Aego 5 Handleiding

19 Augustus 2022

Acoustic Energy Linear 3 Handleiding

19 Augustus 2022

Acoustic Energy Linear 1 Handleiding

19 Augustus 2022

Acoustic Energy Aego P5 MkII Handleiding

19 Augustus 2022

Acoustic Energy Aegis Evo Subwoofer Handleiding

19 Augustus 2022

Acoustic Energy Linear Centre - 7 Handleiding

19 Augustus 2022

Acoustic Energy Aelite Centre Handleiding

19 Augustus 2022

Acoustic Energy Aego T System Handleiding

19 Augustus 2022

Acoustic Energy Radiance Sub Handleiding

19 Augustus 2022

Handleiding

Nieuwste handleidingen voor

AEG Electrolux avq2100 Handleiding

8 November 2024

AEG Electrolux ce 1800 vampyr Handleiding

8 November 2024

AEG Electrolux avc 1121 viva control power Handleiding

8 November 2024

Little Tikes 621239 Handleiding

24 Oktober 2024

AEG Electrolux ce 270 0 vampyr Handleiding

8 November 2024

Techno Line WS 8055 Handleiding

12 Juli 2024

Techno Line WS 7024 Handleiding

12 Juli 2024

Techno Line WS 6767 Handleiding

12 Juli 2024

Techno Line WS 9170 Handleiding

12 Juli 2024

Techno Line WT 171 Handleiding

12 Juli 2024