ZTE Orange Neva zen Handleiding

ZTE Niet gecategoriseerd Orange Neva zen

Lees hieronder de 📖 handleiding in het Nederlandse voor ZTE Orange Neva zen (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 199 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
秘密 Confidential▲
<以上所有信息均为中兴通讯股份有限公司所有,不得外传>
All Rights reserved, No Spreading abroad without Permission of ZTE
1
Orange Neva Zen(A5 2019) Upgrade Guide (Through an SD
Card)
1. Cautions
The software version and pictures in this document are just for
reference only. Please use ZTE handset support website provided version
to download software.
1) Download the upgrade package.
Open http://www.ztedevice.com.cn/support and download the upgrade
package (update.zip) that matches your phone model. If the
downloaded package is not update.zip, unzip the package to obtain
update.zip.
Ensure that your micro SD card is at least 3GB.
Note Please refer to our current version download size.
2) Remove the SIM card, then back up the data and APPs in your phone
before the upgrade.
3) Perform data backup.
Note: You should not remove the SD card during the backup process. To
avoid data lost, it is not recommended to cancel the backup process.
4) Verify that the file in the root directory of the SD cardupdate.zip
matches the model of the phone. Do not modify the file name and
extension name of the files in the upgrade package.
5) Verify that your phone has enough (at least 40%) power. Charge the phone
if required. To avoid data lost or upgrade failure, it is not recommended to
upgrade your phone through an SD card when the phone is being charged.
6) You should not perform any other operation on the phone during the
upgrade process.
7) A normal upgrade should be completed in minutes. If the phone does not5
reboot or show any response in minutes, you should perform the upgrade5
process again. If the phone cannot be started, perform a forced upgrade. If
the forced upgrade does not work, you should contact an after-sale service
agent for support.
2. Upgrade Description
There are two upgrade methods: normal upgrade and forced upgrade.
If the phone cannot be started properly, for example, the phone cannot be
started, or the phone does not enter standby state, perform a forced upgrade.
秘密 Confidential▲
<以上所有信息均为中兴通讯股份有限公司所有,不得外传>
All Rights reserved, No Spreading abroad without Permission of ZTE
2
If the phone can be started properly and the menu can be selected,Settings
perform a normal upgrade.
3. Upgrade Steps
A. Normal upgrade (the primary upgrade method)
1) Download the upgrade package that matches the phone model from
ZTE official website (http://www.ztedevice.com.cn/support/), extract
update.zip from the package, and copy update.zip to the root directory
of the SD card (the file name must be update.zip).
2) Select > , verify that the update.zip file in theFile Manager SD Card
root directory of the SD card is proper, see Figure 3-1:
Figure 3-1
3) Tap and select > > > ,seeSettings System Advanced System Updates
Figure 3-2.
Figure 3-2
4) Touch “Install” to install the software version, see Figure 3-3.
Figure 3-3
秘密 Confidential▲
<以上所有信息均为中兴通讯股份有限公司所有,不得外传>
All Rights reserved, No Spreading abroad without Permission of ZTE
3
5) Click Install to restart the phone and start the upgrade. See Figure 3-4
Figure 3-4
B. Forced upgrade (for the phones that cannot be started or the phones
that cannot enter standby state)
1) For a powered-off phone, Press 1 second,then hold thePower key
volume down power Androidkey and key until the phone enters
recovery. volumeIn this mode, the key can be used to select a menu, the
power key can be used to confirm it.
2) Press the key to selectVolume down Apply update from SD card,
and press the key to confirm it. The root directory of the SD card ispower
opened.
3) Press the key to select the file, and press theVolume down update.zip
power key to confirm it. The phone starts the upgrade process.
4) The phone completes the upgrade process in about minutes. the5
screen will be displayed , select:Install from SD card complete reboot
system now powerand press the key to confirm it.
4. (Optional) Restoring the Data
If you have backed up data before upgrading your phone, restore the data.
Do not remove the SD card during the restoration process. To avoid data
lost, it is not recommended to cancel the restoration process.


Product specificaties

Merk: ZTE
Categorie: Niet gecategoriseerd
Model: Orange Neva zen

Heb je hulp nodig?

Als je hulp nodig hebt met ZTE Orange Neva zen stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd ZTE

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024