ZTE AC30 Handleiding

ZTE Mobiele telefoon AC30

Lees hieronder de 📖 handleiding in het Nederlandse voor ZTE AC30 (2 pagina's) in de categorie Mobiele telefoon. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Indicator Status Description

Battery

indication

RED glittering Please charge

RED bright Voltage of battery is low

Green glittering Charging

Green bright Voltage of battery is high

LED off No battery.

Signal

strength

indication

Red bright ERROR or NO signal or NO

network service or NO SIM

GREEN glittering Signal is ok

Green bright Signal is good

LED off Low power mode

Wi-Fi

indication

LED off WIFI is inactive or low power

mode

BLUE bright WPS is active

Blue bright Wi-Fi is active

Network

indication

RED glittering 2G Modem data transferring

RED bright Register on 2G network

GREEN glittering 3G Modem data transferring

GREEN bright Register on 3G network

LED off ERROR or NO signal or NO

network service or NO SIM

Notes:

* The battery LED will be GREEN bright once the battery is fully

charged when power on.

* The battery LED will be turn off once the battery is fully charged

when power off.

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China

Postcode: 518057 Tel: +86-755-26779999

URL: http://www.zte.com.cn E-mail: mobile@zte.com.cn

ZTE AC30

Quick Start Guide

2 4 5 6 73 8

LEGAL INFORMATION

No part of this publication may be excerpted, reproduced, translated

or utilized in any form or by any means, electronic or mechanical,

including photoco pying and microfilm, without the prior written

permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right to

make modications on print errors or update specications without prior

notice.

Version No.: R1.0

Edition Time: July-2011

Manual No.: 079584503492

Introduction

ZTE AC30 is a 3G/2G mobile hotspot device, working in CDMA/1X/

EVDO network. The client devices could connect to it via USB or Wi-Fi

interface. The device supports data and SMS services, enabling you to

communicate anytime and anywhere.

This quick guide provides instructions on how to install and get started

with the product. For information about connection of services, please

consult your service provider.

Specication

Data Service CDMA EVDO: DL 3.1 Mbps

UL 1.8 Mbps

Weight 80 g

Dimensions (W×H×D): 99.7 mm*53.7 mm*13.9 mm

Power Adapter +5V (DC), 0.7 A Max

Battery 1500 mAh

*Standby time 100 hours

*Working time 4 hours

Operate system Windows 7, Windows Vista, Windows XP (SP2 or

later), MAC 10.4 or later

Web Browser Wind ows 7, Windows Vista (64bit or 32bit),

Windows XP (SP2 and later), MAC (10.4 later)

Notes:

The device’s standby and working time are only for your reference, and

based on ideal working environment.

Switching On/Off Your Device

Press and hold the Power Key for three seconds to switch the device

on or off.

When you turn the device on, the signal icon is lit.

Charging Your Device

Notes:

• Charge at least 5 hours to ensure a full initial charge.

• Charging is only possible within a temperature range of 0°C to 45°C.

1. Connect the Mini USB end of the AC wall charger to the Mini USB

port on the device.

2. Plug the other end of the AC wall charger into the appropriate

electrical outlet.

Working Mode

Your device supports three working modes. For the client, we only use

PC or laptop as the example in this document.

USB Mode: Connect to the device with the USB cable.

Wi-Fi Mode: Connect to the device via Wi-Fi.

Mixed Mode: Connect to the device with the above two connection

methods.

Notes:

If you want to connect to the Internet by using Wi-Fi mode, make sure

that the client supports the Wi-Fi function.

The following picture is the application example. All of the client devices

can surf on the Internet at the same time.

Getting to Know Your Device

The following gure shows the appearance of the device, it is only for

your reference. The actual device may be different.

Interface and Buttons

1. Power Hold the Power button to switch on/off the

device

2. Indicator It indicates your device’s status.

3. Charger/USB port

• Charge your device

• Connect the client to your device via USB

cable

Notes:

* Continuously press the Power button ve times within 5 seconds,

the device will restart automatically and restore to the factory

default settings.

LED Indicator

It indicates the status of your device.

Hardware Installation

Inserting (U)SIM Card and Battery

1. Use the thumb catch at the bottom of the device to open the battery

cover.

2. Insert (U)SIM Card into the slot.

Warning:

Please power off the device and remove the external power adapter

before removing or inserting the (U)SIM card, if not, the device or (U)SIM

card may be damaged.

3. Insert the battery as shown with the contacts located against the

gold springs.

4. Press the battery down ush into the case.

5. Once the battery is secure, place the battery cover back on the

device until it locks into place.

Establishing a Connection Between Your Device and the Client

Via USB Cable

1. Connect your device and the client with the USB cable.

2. Power on your device.

3. Follow the system prompts to complete the software installation:

Notes:

• If the system does not launch installation automatically, you can run

the installation program in path of My Computer > Mobile Hotspot

> AutoRun.exe.

• The driver of your device will be installed at the same time.

4. After the installation, the system will create a shortcut icon on

your desktop and a program group in the Mobile Hotspot Start

> Programs menu. The connection between your device and the

client will be established successfully a moment later.

Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes to initialize,

and then Wi-Fi LED is blinking.

2. Use your normal Wi-Fi application on the client to search the

available wireless network.

Notes:

You need to check your Wireless

Network Connection. Set th e

client to obtain an IP address

automatically in the Int ern et

protocol (TCP/IP) properties, and

the client will get an IP address

like “192.168.0.100”.

3. Se lec t the SSID of yo ur

d e v i c e , a n d th e n cl i c k

Connect.

10 12 13 14 15 16 17 1811

View the information of WAN, WLAN and Device. Input the case-

sensitive default password “ ”, and then click to access the admin Login

WebGUI Conguration page.

Notes:

• Do not put anything on the top of your device. Do not lay devices to

overlap each other when using.

• The device takes 1~2 minutes to initialize, and attach to the

network.

PIN Code Verication

If the PIN code of your SIM card is enabled, you will need to input the

PIN code when you login at the rst time.

Notes:

The (U)SIM card will be locked if you ente r wrong PIN code

consecutively for three times.

If you want to modify the PIN Status, please select Settings >

Advanced > PIN Manage to do the actions.

Quick Setup

After logging in, select p, and then the Quick Setup wizard Quick Setu

appears.

The Quick Setup wizard guides you how to set the basic parameters

for your device in the safest way. After this procedure, you can use your

Internet service.

Notes:

The parameter settings may have been preset by your service provider,

and you will enjoy your Internet service directly. Please contact your

service provider for details if you want to do some modication.

WAN Connection

After logging in, select WAN Connection, and you can choose the

WAN Connection Mode according to your requirement.

Settings

After logging in, select Settings, and you can do the following

operations.

Select Settings >

Wi-Fi Settings

View the current station list, change the basic

wireless network settings, choose security mode

and WPA type

Select Settings >

3G Settings

View the 3G Wireless Information, select Band

Selection Mode or change APN Setting

Select Settings >

Firewall

Set the Mac/IP/Port Filtering, Port Forwarding or

the System Security conguration

Select Settings >

Advanced

View the current status of your device, change

the Administrator Settings, restore factory

defaults, manage PIN or set the LAN interface

conguration

Notes:

Make sure that you can remember the new password if you change the

Please restore the device to the factory default settings in case you

forget the new password.

• The use of electronic transmitting devices is forbidden in aircrafts,

at petrol stations and in hospitals. Please observe and obey all

warning signs and switch off your device in these conditions.

• Do not touch the inner antenna area if not necessary. Otherwise it

will affect your device’s performance.

• Store your device out of the reach of little children. Your device may

cause injury if used as a toy.

• Do not touch the metallic parts of your device so as to avoid a burn,

when your device is working.

Using Your Device

• Please use original accessories or accessories that are authorized.

Using any unauthorized accessories may affect your device’s

performance, and violate related national regulations about telecom

terminals.

• Avoid using your device near or inside metallic structures or

establishments that can emit electromagnetic waves. Otherwise it

may inuence signal reception.

• Your device is not waterproof. Please keep it dry and store in a

shady and cool place.

• Do not use your device immediately after a sudden temperature

change. In such case, it will produce dew inside and outside your

device, so don’t use it until it becomes dry.

• Handle your device carefully. Do not drop, bend or strike it.

Otherwise your device will be damaged.

• No dismantling by non-professionals and only qualied technicians

can undertake repair work.

• Operating temperature range of 0 °C ~ +35 °C and humidity range

of 5% ~ 95% are recommended.

Using Battery

• Do not short-circuit the battery, as this can cause excessive heat

and re.

• Do not store battery in hot areas or dispose of it in a re to avoid

explosion.

• Do not disassemble or modify the battery.

• When not using the battery for a long period, remove it from the

device and store it in a cool dry place.

• Never use any charger or battery damaged or worn out.

• Return the wear-out battery to the provider or put it in the appointed

recycle place. Do not put it in familial rubbish.

Warning:

If the battery is broken, keep away from it. If it taints your skin, wash

your skin with abundant fresh water and ask doctor help if necessary.

Limited Warranty

• This warranty does not apply to defects or errors in the Product

caused by:

i. Reasonable abrasion.

ii. End User’s failure to follow ZTE’s installation, operation or

maintenance instructions or procedures.

iii. End User’s mishandling, misuse, negligence, or improper

installation, disassembly, storage, servicing or operation of the

Product.

iv. Modifications or repairs not made by ZTE or a ZTE-certified

individual.

v. Power failures, surges, fire, flood, accidents, actions of third

parties or other events outside ZTE’s reasonable control.

vi. Usage of third-party products, or usage in conjunction with

third-party products provided that such defects are due to the

combined usage.

vii. Any other cause beyond the range of normal usage intended for

the Product.

End User shall have no right to reject or return the Product, or receive a

refund for the Product from ZTE under the above-mentioned situations.

Notes:

• To protect your device from illegal use, there will be a pop-up

window to require the password. Please check the label on the

battery compartment of your device to gain the SSID and preset

password information.

• You can change the password on Settings > Wi-Fi Settings >

Security > WPA Key, please remember the password you set.

4. Wait a moment, the connection between your device and the client

will be established successfully.

Accessing the Internet

1. Switch on the device.

2. Establish a connection between your device and the client.

3. After successfully establishing the connection, access the Internet

in the , or Always On Manual On Demand mode. The default mode

is .Always On

Notes:

You can browse the WebGUI Configuration page and click WAN

Connection to set the WAN connection mode.

Accessing the WebGUI Conguration Page

1. Make sure the connection between your device and the client is

correct.

2. Launch the internet browser and enter http://192.168.0.1 or http://

u.home in the address bar, or double click the Mobile Hotpot icon

on the desktop directly.

Notes:

It is recommended that you use IE (7.0 or later), Firefox (3.0 or later),

Opera (10.0 or later), Safari (4.0 or later) or Chrome (5.0 or later).

3. The login page appears as follows.

Disconnecting from the Internet

1. Log i n th e WebG UI C onfigur atio n pa ge, and select WAN

Connection.

2. Select .Manual > Disconnect Internet

3. Click .Apply

Notes:

Turning off the device can also terminate the internet connection.

SMS

This function allows you to view, send and receive short messages.

After logging in, select , and you can do the following operations.SMS

Select Operate the SMS in your device SMS > Native

Select Operate the SMS in your (U)SIM cardSMS > UIM Card

Select Send or save SMSSMS > New Message

Select SMS > SMS Settings Set the SMS conguration

PhoneBook

This function allows you to store contacts to your device or (U)SIM

card.

After logging in, select , and you can add a new contact by PhoneBook

clicking the tab, and perform operations to the contacts in the Add New

Native (U)SIM Card or tab.

Sleep Mode

When you active Wi-Fi function and use battery to support the device,

once no user connected to AC30 within 10 minutes, the device will

enter sleep mode, and all LEDs will be turned off. In sleep mode, the

Wi-Fi function will be closed, when the Power button is pressed, the

device will be awaken, and you should press the button again to Power

active Wi-Fi function.

Notes: You can only press the button to awake the device.Power

Warning and Notice

To the Owner

• Some electronic devices are susceptible to electromagnetic

interference sent by your device if inadequately shielded, such as

the electronic system of vehicles. Please consult the manufacturer

of your device before using if necessary.

• Operating your device may interfere with medical devices like

hearing aids and pacemakers. Please always keep them more than

20 centimeters away from such medical devices when they are

turned on. Turn your device off if necessary. Consult a physician or

the manufacturer of the medical device before using your device.

• Be aware of the usage limitation when using your device at places

such as oil warehouses or chemical factories, where there are

explosive gases or explosive products being processed. Turn off

your device if required.

• This warranty is End User’s sole remedy and ZTE’s sole liability

for defective or nonconforming items, and is in lieu of all other

warranties, expressed, implied or statutory, including but not

limited to the implied warranties of merchantability and tness for a

particular purpose, unless otherwise required under the mandatory

provisions of the law.

Limitation of Liability

ZTE shall not be liable for any loss of profits or indirect, special,

incidental or consequential damages resulting from or arising out of

or in connection with using of this product, whether or not ZTE had

been advised, knew or should have known of the possibility of such

damages, including, but not limited to lost profits, interruption of

business, cost of capital, cost of substitute facilities or product, or any

downtime cost.

How to Get Help

You can get Help by:

• Sending E-mail to mobile@zte.com.cn

• Visiting http://www.zte.com.cn

• Calling Service Hotline: +86–755–26779999

Product specificaties

Merk:	ZTE
Categorie:	Mobiele telefoon
Model:	AC30

Heb je hulp nodig?

Als je hulp nodig hebt met ZTE AC30 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Mobiele telefoon ZTE

ZTE Concord II Handleiding

20 Juni 2023

ZTE N-860 Handleiding

13 Juni 2023

ZTE C-78 Handleiding

2 Juni 2023

ZTE G-R222 Handleiding

29 Mei 2023

ZTE T-165 plus Handleiding

28 Mei 2023

ZTE Light V9A Handleiding

27 Mei 2023

ZTE Grand X Max Handleiding

26 Mei 2023

ZTE Lever LTE Z936L Handleiding

17 Mei 2023

ZTE Light V9 Handleiding

11 Mei 2023

ZTE Rocket MF-591 Handleiding

10 Mei 2023

Handleiding Mobiele telefoon

Nieuwste handleidingen voor Mobiele telefoon

GPO Push Button Phone Handleiding

18 December 2024

Bea-fon SL671A Handleiding

14 December 2024

Bea-fon SL651A Handleiding

14 December 2024

Bea-fon S33 Handleiding

14 December 2024

Bea-fon C220 Handleiding

14 December 2024

Bea-fon SL470 Handleiding

14 December 2024

Bea-fon SL630 Handleiding

14 December 2024

Bea-fon SL652A Handleiding

14 December 2024

Bea-fon SL495 Handleiding

14 December 2024

Aiwa FPH-S100-4G Handleiding

12 December 2024