ZLine KBAR30 Handleiding

ZLine Afzuigkap KBAR30

Lees hieronder de 📖 handleiding in het Nederlandse voor ZLine KBAR30 (11 pagina's) in de categorie Afzuigkap. Deze handleiding was nuttig voor 70 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
Designer Wall Range Hood Installation
9
Installation
Tutorial Video
*Note: Wall range hoods with single motors will come with a square to 6˝ round transition piece
and will include a backdra damper. e ducting with these range hoods is 6˝.
Dual motor wall hoods will come with a square to round transition piece without a backdra
damper. e ducting with these range hoods is 8˝.
*Note: Use rigid ducting wherever possible. Try and minimize the use of elbows. More elbows
and longer runs create higher static pressure. e hood comes with a grounded three prong plug
that can either be direct wired or plugged into a 20 amp. circuit.
1. Main Hood With All Lights and
Button Banks Pre-installed
2. Chimney
3. Transition Piece (For 6˝ or 8˝)
4. Bae Filters
5. Flexible Duct (For 6˝ or 8˝)
6. Packet of Screws and Anchors
7. Top Mounting Bracket
8. Crown Molding Bracket
9. Crown Molding
Grease Cup
10.
Parts Supplied:
Please unpack your range hood when it is delivered
and inspect to ensure all parts are included.
10
Designer Wall Range Hood Installation
*e recommended height to install your hood is 30 minimum and 36˝ ˝ maximum
above the cooktop.
*For Outdoor (304 Series) hood installation: e unit must be installed at a minimum
of 36 above the grill. ˝
1
2
3
4
Find the center of the wall where you
are installing the hood. Make sure
there is sucient bracing to hold the
weight of the hood. Mark your center
line and measure out from the center
to nd your two mounting points.
Make sure your mounting points are
level when you mark them. It is rec-
ommended to install the hood direct-
ly into wood supports. (Figure 1)
Mark your mounting points and in-
stall the two mounting screws provid-
ed leaving the heads out ¼ to mount ˝
hood. (Figure 1)
Mount the main body of the hood to
the two screws and screw into place.
(Figure 2)
Mount the crown molding bracket
centering it above the hood. (Figure3)
Figure 1
Figure 2
Figure 3
11
Designer Wall Range Hood Installation


Product specificaties

Merk: ZLine
Categorie: Afzuigkap
Model: KBAR30

Heb je hulp nodig?

Als je hulp nodig hebt met ZLine KBAR30 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Afzuigkap ZLine

Handleiding Afzuigkap

Nieuwste handleidingen voor Afzuigkap