ZKTeco DL-52T28B Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor ZKTeco DL-52T28B (12 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Quick Operation Guide
IP Camera
1
Precautions
The content is to make sure your operations of the products are strictly in accordance with this
manual, so as to prevent danger or loss of property. So please read the manual carefully and keep it
for your future reference before using the products.
As shown below, the preventive measures is divided into “Warning” and “Attention”:
Warning: Without Warning may lead to death or serious injury.
Attention: Without attention may lead to injury or loss of property.
Warning To remind users to keep away
from potential death or danger of serious
injury.
Attention
To remind users to keep away
from potential injury or danger of property
from loss
Warning:
Please use the required power meets SELV (safety extra-low voltage circuit) to supply. In the
accordance of IEC60950-1 ,the power should comply with the rated voltage of DC 12V and AC 24V
(Depends on the specific model) of Limited Power Source.
If the equipment works abnormal, please contact your purchasing store or the nearest service
center. Do not disassemble or modify the equipment in any methods.( If do without permission,
user will be responsible for the result.)
In order to reduce the risk of fire or electric shock, please prevent the product from raining and
moisture.
The installation should be done by the professionals and comply with local regulations.
Please install the easy used electric failure equipment into wiring of the building.-
The instruction of equipment installation on the ceiling: After installation, please to make sure
the connection can withstand 50Newton(N) downward pull .
2
Attention:
Before the camera running, please make sure whether the supply power is right.
Please do not drop off or heavily strike the product.
Please do not touch the image sensor optical element. If it is necessary to clean, please use
the clean cloth slightly moist with alcohol to wipe dust; When not in use, please cover the lens
to protect the image sensors.
Please avoid focusing at glare (e.g. lighting, sunlight etc.), or it will be resulting in too bright or
colorful vertical stripes on the screen (which is not camera’s error) and affect life of image
sensors.
The laser beam may burn down image sensors. When the installation of laser beam used,
please make sure that the surface of image sensors does not expose under the laser beam.
Please avoid followed places: moisture, dusty, hottest, coldest (Normal work temperature
range: -14°F+ 140°F) and strong electromagnetic radiation etc.
Please do not accumulate more heat and maintain ventilation flow around the camera.
When using the camera, please do not make water and any liquid flow into it.
When delivering the camera, please packing as shipping out or with the same quality material
of the factory.
Parts change regularly: Some parts of the products (e.g. Electrolytic Capacitors) should change
regularly according to their average lifespan. Their lifespan would be different for the using
environment and using time, so please check them regularly. For more information, please
consult with your purchasing distributors.


Product specificaties

Merk: ZKTeco
Categorie: Bewakingscamera
Model: DL-52T28B

Heb je hulp nodig?

Als je hulp nodig hebt met ZKTeco DL-52T28B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera ZKTeco

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera