Zephyr ZMLM90CG Handleiding

Zephyr Afzuigkap ZMLM90CG

Lees hieronder de 📖 handleiding in het Nederlandse voor Zephyr ZMLM90CG (20 pagina's) in de categorie Afzuigkap. Deze handleiding was nuttig voor 242 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/20
Use, Care, and Installation Guide
www.zephyronline.com
APR18.0301 © Zephyr Ventilation LLC.
Universal Make-Up Air Damper
MUA006A
MUA008A
MUA010A
MODELS MUA006A • MUA008A • MUA010A
Page 2
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE THE FOLLOWING:
1. Installation work and electrical wiring must be done by a qualified
person(s) in accordance with all applicable codes and standards,
including fire-rated construction codes and standards.
2. This unit is not designed to provide combustion air for fuel-
burning appliances.
3. Do not connect the unit directly to a combustion appliance of
any type.
4. Sufficient air is needed for proper combustion and exhausting
of gases through the flue (chimney) of fuel burning equipment
to prevent backdrafting. Follow the heating equipment
manufacturer’s guideline and safety standards such as those
published by the National Fire Protection Association (NFPA),
and the American Society for Heating, Refrigeration and
Air Conditioning Engineers (ASHRAE), and the local code
authorities.
5. Before servicing or cleaning unit, switch power off at service
panel and lock the service disconnecting means to prevent
power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
6. When performing installation, servicing or cleaning the unit, it is
recommended to wear safety glasses and gloves.
7. During extreme weather events including snow storms, ensure
that the intake area for the outside air duct is not blocked and
able to provide a clear pathway for outside air to enter the
system.
8. When cutting or drilling into wall or ceiling, do not damage
electrical wiring or other hidden utilities.
9. When notching or drilling into framing including floor supports,
rim joists, and wall studs, comply with code and manufacturer
limitations on allowable modifications to these structural
members.
10. This unit is intended to be installed within the home in a location
protected from moisture.
11. This unit must be in an accessible location which allows for
inspection of the unit.
12. Use this unit only in the manner intended by the manufacturer.
If you have questions, contact the manufacturer at the address
or telephone number listed in this document.
13. When federal, provincial or state legislation comprises more
restrictive installation and/or certification requirements, the
aforementioned requirements prevail on those of this document
and the installer agrees to conform to these at his own expense.
AUTOMATIC MAKE-UP AIR DAMPER WITH
TRANSFORMER & PRESSURE SWITCH
READ AND SAVE THESE INSTRUCTIONS
FOR RESIDENTIAL USE ONLY
CAUTION
1. Do not locate outside air inlet near hazardous materials or explosives.
2. Unit shall not be installed to introduce air from crawlspaces, garages,
attics, adjacent dwelling units, or other locations within the building
shell. Unit shall be installed to introduce air directly from outdoors.
3. Do not run the outside air duct directly above or closer than 2 ft to
any furnace or its supply plenum, boiler, or other heat producing
appliance.
4. Any ductwork used in conjunction with the Damper must be installed
in compliance with all local and national codes that are applicable.
5. Do not operate the Damper for fresh air introduction until all system
filters, including the central duct system filter, have been installed per
the system design.
6. Please read the unit specification label on the product for further
information and requirements.
7. The Damper’s outdoor air intake, ducting, and any filters should be
inspected and maintained on a regular basis.
8. Insulate the duct and damper to prevent build-up of condensation in
cold weather climates. Vapor barriers on both sides of insulation are
recommended.
WARRANTY
ZEPHYR ONE YEAR LIMITED WARRANTY
ZEPHYR warrants to the original consumer purchaser of its products that such products
will be free from defects in materials or workmanship for a period of one year from the
date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
During this one-year period, ZEPHYR will, at its option, repair or replace, without charge,
any product or part which is found to be defective under normal use and service.
THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS, TUBES,
HALOGEN AND INCANDESCENT BULBS, FUSES, FILTERS, DUCTS, ROOF CAPS, WALL
CAPS AND OTHER ACCESSORIES FOR DUCTING. This warranty does not cover (a) normal
maintenance and service or (b) any products or parts which have been subject to misuse,
negligence, accident, improper maintenance or repair (other than by ZEPHYR), faulty instal-
lation or installation contrary to recommended installation instructions.
The duration of any implied warranty is limited to the one-year period as specified for the
express warranty. Some states do not allow limitation on how long an implied warranty
lasts, so the above limitation may not apply to you.
ZEPHYR’S OBLIGATION TO REPAIR OR REPLACE, AT ZEPHYR’S OPTION, SHALL BE THE
PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. ZEPHYR SHALL
NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT
OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE. Some states do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitation
or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary
from state to state. This warranty supersedes all prior warranties.
To qualify for warranty service, you must (a) notify ZEPHYR at the address or telephone
number below, (b) give the model number and part identification and (c) describe the nature
of any defect in the product or part. At the time of requesting warranty service, you must
present evidence of the original purchase date.
Zephyr Ventilation, 2277 Harbor Bay Parkway, Alameda, CA 94502
www.zephyronline.com 888-880-8368
MODELS MUA006A • MUA008A • MUA010A
Page 3
OUTSIDE AIR INTAKE LOCATION
Proper design and location of the outside air intake location is critical in
ensuring that the Damper can safely and reliably provide an opening for
fresh air to enter the home. The following requirements for the location
of the outside air intake must be met:
• Outside air intake is located a minimum of 10’ from combustion ap -
pliance vents, chimneys, plumbing stacks, and bathroom or kitchen
exhaust vents. If local codes have more stringent separation re-
quirements, they shall apply.
• Outside air intake is placed high enough above prevent grade to
blockage from snow or other debris such as leaves, and at a mini-
mum of 1’ above grade.
• Make-up air damper should not air from crawlspaces, draw  ga-
rages, attics, adjacent dwelling units, or any enclosed part of the
building. The Damper should be installed to draw air directly from
outdoors.
OUTSIDE AIR INTAKE OPENING PROTECTION
Because the Damper, together with the end cap and outside air duct
which are installed with it, will allow outdoor air into the indoor environ-
ment, it is important to meet the following requirements:
• ModelAK00030(6”),AK00032(8”)andAK00052(10”)freshairinlet
wall caps include protective bird screens to keep out animals and
outside debris. Clean screens often and do not remove.
• Ifaprotective bird screen other than the screen provided is used, it    
must cover the entire opening of the outside air duct. This screen
mustalso openings have of at least ¼” but no larger than½”.
• The outdoor air intake opening should meet local code provisions
for the protection of openings in exterior walls, including steps to
prevent moisture intrusion around the opening.
Note that the screen over the outside air opening is not a filter. It is
intended to prevent the intake of leaves, animals, or debris into the out-
side air duct. A downstream filter is necessary to remove pollen, dust,
and other airborne particles. Potential filter locations are shown below
in the Typical Installations section.
MINIMUM RETURN AIR TEMPERATURE REQUIREMENTS
HVAC equipment manufacturers may have minimum requirements for
the air temperature in the return air plenum. Introducing outdoor air to
the return side of the central duct system may impact this temperature.
The installer should adjust both the size of the outside air duct and the
location of its connection to the return side of the central duct system in
a manner so that minimum air temperature requirements are satisfied
under design conditions.
PLAN THE INSTALLATION
Planning the installation first requires selecting the most appropriate
installation approach. The chart below offers suggestions for the most
effective installation approach by considering a few important factors.
Further details on the two main types of installations are provided below.
Yes
•House has central duct work?
Yes
•Return-air side of duct work is
accessible -either the return -air trunk
or return -air plenum?
Damper connected to
return side of central
duct system
No
No
Damper ducted directly
to a ceiling, floor, or wall
register
WHAT IS INCLUDED IN THE
PACKAGE
-Motorized Damper
- Transformer
-Pressure Switch Kit which includes:
- Pressure Switch
- Probe
-12” PVC tubing 1/4” I.D.
- Gasket
-(6) Sheet Metal Screws
TOOLS REQUIRED
-1/4”Socket Drive
- Flathead or Phillips Screw Driver
-3/8” Drill Bit
- Duct Tape
- Low Voltage Wire (2 Conductor)
- (2) 1/4” Female Spade Terminals
- Wire Nuts

Product specificaties

Merk: Zephyr
Categorie: Afzuigkap
Model: ZMLM90CG

Heb je hulp nodig?

Als je hulp nodig hebt met Zephyr ZMLM90CG stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Afzuigkap Zephyr

Zephyr

Zephyr Brisas BML-E36BG Handleiding

11 September 2024
Zephyr

Zephyr Brisas BMI-E36CG Handleiding

5 September 2024
Zephyr

Zephyr Brisas BVE-E30BS Handleiding

5 September 2024
Zephyr

Zephyr Brisas BVE-E36BS Handleiding

5 September 2024
Zephyr

Zephyr DME-E48ASSX Handleiding

26 Augustus 2024
Zephyr

Zephyr ZOM-E30BS Handleiding

26 Augustus 2024
Zephyr

Zephyr ZRO-E30FS Handleiding

26 Augustus 2024
Zephyr

Zephyr ZLU-E30CS Handleiding

26 Augustus 2024
Zephyr

Zephyr ZVO-E30BG Handleiding

26 Augustus 2024
Zephyr

Zephyr Brisas BML-E30BG Handleiding

22 Augustus 2024

Handleiding Afzuigkap

Nieuwste handleidingen voor Afzuigkap

Kuppersbusch

Kuppersbusch DW7100.0E Handleiding

2 December 2024
Kuppersbusch

Kuppersbusch DI9340.0E Handleiding

2 December 2024
Gorenje

Gorenje BHI626E6B Handleiding

2 December 2024
Gorenje

Gorenje BHI626E4X Handleiding

2 December 2024
Gorenje

Gorenje BHI626E6X Handleiding

2 December 2024
Meireles

Meireles MEP 61 X Handleiding

30 November 2024
GE

GE JV665HBB Profile Handleiding

30 November 2024
Bosch

Bosch DUH80553UC Handleiding

30 November 2024
Bosch

Bosch DUHP6853UC Handleiding

30 November 2024
Privileg

Privileg DGIFG 94 LM X Handleiding

30 November 2024