Zanussi ZXS646ITX Handleiding

Zanussi Fornuis ZXS646ITX

Lees hieronder de 📖 handleiding in het Nederlandse voor Zanussi ZXS646ITX (16 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
1
BUILT-IN HOB
ZXS 646 IT
INSTRUCTION BOOKLET
UA SI HR
2
About Installation, Cleaning
and Maintenance
It is mandatory that all operations required for the
installation are carried out by a qualified or competent
person, in accordance with existing rules and regulations.
Disconnect the appliance from the electrical supply,
before carrying out any cleaning or manteinance work.
Ensure a good ventilation around the appliance. A poor
air supply could cause lack of oxygen.
Ensure that the gas supply complies with the gas type
stated on the identification label, placed near the gas
supply pipe.
Using a gas cooking appliance will produce heat
and moisture in the room which it has been
installed in. Ensure a continuous air supply, keeping
the air vents in good conditions or installing a
cooker hood with discharge tube.
In case of intensive or long time use of the appliance,
make the ventilation more efficient, by opening a
window or increasing the electric exhaust fan
power.
Once you removed all packaging from the appliance,
ensure that it is not damaged and the electric cable is
in perfect conditions. Otherwise, contact your dealer
before proceeding with the installation.
The manufacturer disclaims any responsability
should all the safety measures not be carried out.
Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious
malfunctioning. Refer to your local Service Centre.
Always insist on genuine spare parts.
During Operation
It is most important that this instruction book should be
retained with the appliance for future reference. Should
the appliance be sold or transferred, always ensure that
the book is left with the appliance in order that the new
owner can get to know the functions of the appliance and
the relevant warnings.
This appliance has been designed for non professional
purpose in private houses only. It is meant to cook edible
foodstuff only and MUST NOT be used for any other
purposes.
It is dangerous to alter the specification in any way.
For hygiene and safety reasons, this appliance should
be kept clean at all times. A build-up of fats or other
foodstuff could result in a fire.
Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious
malfunctioning. Refer to your local Service Centre.
Always insist on genuine spare parts.
Ensure that all control knobs are in the OFF position
when not in use.
Should you connect any electrical tool to a plug near this
These warnings are provided in the interest of safety. You MUST read them carefully before
installing or using the appliance.
Important Safety Information
cooking appliance, ensure that electric cables are not
in contact with it and keep them far enough from the
heated parts of this appliance.
If the appliance is out of order, disconnect it from the
electric supply.
Child Safety
This appliance has been designed to be operated by
adults and children under supervision. Young children
MUST NOT be allowed to tamper with the controls or play
near or with the oven.
Accessible parts of this appliance may become hot
when it is in use. Children should be KEPT AWAY until it has
cooled.
This appliance is not intended for use by children or
other persons whose physical, sensory or mental
capabilities or lack of experience and knowledge
prevents them from using the appliance safely
without supervision or instruction by a responsible
person to ensure that they can use the appliance
safely.
Environmental Information
After installation, please dispose of the packaging with
due regard to safety and the environment.
When disposing of an old appliance, make it unusable,
by cutting off the cable.
The following symbols will be found in the text to
guide you throughout the Instructions:
Safety Instructions
Step by step instructions for an operation
Hints and Tips
Environmental information
Guide to Use the instructions
The symbol on the product or on its packaging
indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly,
you will help prevent potential negative consequences for
the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this
product, please contact your local city office, your household
waste disposal service or the shop where you purchased
the product.
These instructions are only for the countries
stated by the symbol printed on the front cover
of this instruction book.
3
Once the hob has been installed, it is
important to remove any protective materials,
which were put on in the factory.
Hob burners control knobs
The hob burners control knobs are situated on the hob
right hand side. The symbols on the knobs mean that:
there is no gas supply
there is maximum gas supply
there is minimum gas supply
Lighting the burners
For easier lighting, proceed before putting a
pan on the pan support.
To light a burner, push in the relevant knob and
turn it counterclockwise to "maximum position".
After lighting the flame, keep the knob pushed
down for about 5 seconds. This will allow the
"thermocouple" (Fig. 1, lett. D) to be heated and
the safety device to be switched off, otherwise the
gas supply would be interrupted.
Then, check the flame is regular and adjust it as
required.
If you cannot light the flame even after several
attempts, check the "cap" (Fig. 1, lett. A) and the
"crown" (Fig. 1, lett. B) are in the correct position.
To put the flame out, turn the knob to the symbol .
Always turn the flame down or put it out before taking
the pans off the burner.
Manual switch-on (in case of interruption of the
electric supply) : approached a flame to the burner
and push in the relevant knob and turn it
counterclockwise to "maximum position".
Contents
This appliance complies with the following
E.E.C. Directives:
- 2006/95 (Low Voltage Directive);
- 2004/108
(Electromagnetical Compatibility Directive);
- 90/396 (Gas Appliances Directive )
and subsequent modifications.
MANUFACTURER:
ELECTROLUX ITALIA S.p.A.
C.so Lino Zanussi 30
33080 Porcia (PN) - ITALIA
For the User For the Installer
Instruction for the User
A- Burner cap
B- Burner crown
C- Ignition candle
D- Thermocouple
Important Safety Information 2
Instruction for the User 3
Cleaning and Maintenance 6
European Guarantee 13
Technical Data 7
Instruction for the Installer 7
Gas connection 8
Electrical Connection 9
Adaptation to different types of gas 10
Building In 11
Possibilities for insertion 12
Fig. 1 FO 0204
Do not keep the control knob pressed for more
than 15 seconds.
If the burner does not light even after 15 seconds,
release the control knob, turn it the off” position
and wait for at
least one minute before trying to light the burner
again.


Product specificaties

Merk: Zanussi
Categorie: Fornuis
Model: ZXS646ITX

Heb je hulp nodig?

Als je hulp nodig hebt met Zanussi ZXS646ITX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fornuis Zanussi

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis