Yamaha XP1000 Handleiding
Yamaha
Versterker
XP1000
Lees hieronder de š handleiding in het Nederlandse voor Yamaha XP1000 (22 pagina's) in de categorie Versterker. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/22
POWER AMPLIFIER
OWNERāS MANUAL
BEDIENUNGSANLEITUNG
MODE DāEMPLOI
MANUAL DE INSTRUCCIONES
ES
FR
DE
EN
EnglishDeutschFranƧaisEspaƱol
2 XP7000/XP5000/XP3500/XP2500/XP1000 Ownerās Manual
The above warning is located on the top of the unit.
Explanation of Graphical Symbols
The lightning ļ¬ash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
ādangerous voltageā within the productās
enclosure that may be of sufļ¬cient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturerās instructions.
8 Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
ampliļ¬ers) that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not ļ¬t into your outlet, consult
an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11 Only use attachments/accessories speciļ¬ed by the
manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table speciļ¬ed
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination
to avoid injury from tip-over.
13 Unplug this apparatus during
lightning storms or when unused for long periods of
time.
14 Refer all servicing to qualiļ¬ed service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
(98-6500)
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAU TION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modiļ¬cations not
expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s
supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authori-
zation to use this product in the USA.
* This applies only to products (XP7000, XP5000) distributed by YAMAHA CORPORATION OF AMERICA. (oscillator)
XP7000/XP5000/XP3500/XP2500/XP1000 Ownerās Manual
3
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, ļ¬re or other hazards. These precautions include, but are not limited to, the following:
ā¢ Only use the voltage speciļ¬ed as correct for the device. The required voltage is
printed on the name plate of the device.
ā¢ Use only the included power cord.
ā¢ Do not place the power cord near heat sources such as heaters or radiators, and
do not excessively bend or otherwise damage the cord, place heavy objects on
it, or place it in a position where anyone could walk on, trip over, or roll anything
over it.
ā¢ Be sure to connect to an appropriate outlet with a protective grounding
connection. Improper grounding can result in electrical shock.
ā¢ Do not open the device or attempt to disassemble the internal parts or modify
them in any way. The device contains no user-serviceable parts. If it should
appear to be malfunctioning, discontinue use immediately and have it inspected
by qualiļ¬ed Yamaha service personnel.
ā¢ Do not expose the device to rain, use it near water or in damp or wet conditions,
or place containers on it containing liquids which might spill into any openings.
ā¢ Never insert or remove an electric plug with wet hands.
ā¢ If the power cord or plug becomes frayed or damaged, or if there is a sudden
loss of sound during use of the device, or if any unusual smells or smoke
should appear to be caused by it, immediately turn off the power switch,
disconnect the electric plug from the outlet, and have the device inspected by
qualiļ¬ed Yamaha service personnel.
ā¢ If this device should be dropped or damaged, immediately turn off the power
switch, disconnect the electric plug from the outlet, and have the device
inspected by qualiļ¬ed Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the device or other property. These precautions include, but are not limited to, the following:
ā¢ Remove the electric plug from the outlet when the device is not to be used for
extended periods of time, or during electrical storms.
ā¢ When removing the electric plug from the device or an outlet, always hold the
plug itself and not the cord. Pulling by the cord can damage it.
ā¢ Before moving the device, remove all connected cables.
ā¢ When setting up the product, make sure that the AC outlet you are using is
easily accessible. If some trouble or malfunction occurs, immediately turn off
the power switch and disconnect the plug from the outlet. Even when the power
switch is turned off, electricity is still ļ¬owing to the product at the minimum
level. When you are not using the product for a long time, make sure to unplug
the power cord from the wall AC outlet.
ā¢ Do not use the device in a conļ¬ned, poorly-ventilated location. If this device is
to be used in a small space other than an EIA-standard rack, make sure that
there is adequate space between the device and surrounding walls or other
devices: at least 5cm at the sides, 10cm behind and 10cm above. Inadequate
ventilation can result in overheating, possibly causing damage to the device(s),
or even ļ¬re.
ā¢ Do not expose the device to excessive dust or vibrations, or extreme cold or heat
(such as in direct sunlight, near a heater, or in a car during the day) to prevent
the possibility of panel disļ¬guration or damage to the internal components.
ā¢ Do not place the device in an unstable position where it might accidentally fall
over.
ā¢ Do not block the vents. This device has ventilation holes at the front and rear to
prevent the internal temperature from becoming too high. In particular, do not
place the device on its side or upside down. Inadequate ventilation can result in
overheating, possibly causing damage to the device(s), or even ļ¬re.
ā¢ Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile
phone, or other electric devices. Doing so may result in noise, both in the device
itself and in the TV or radio next to it.
ā¢ Do not place the device in a location where it may come into contact with
corrosive gases or salt air. Doing so may result in malfunction.
ā¢ Before connecting the device to other devices, turn off the power for all devices.
Before turning the power on or off for all devices, set all volume levels to
minimum.
ā¢ Use only speaker cables for connecting speakers to the speaker jacks. Use of
other types of cables may result in ļ¬re.
ā¢ Be sure to connect to a properly grounded power source. A ground screw is
provided on the rear panel of this device for maximum safety and shock
prevention. If the mains outlet is not grounded, be sure to connect the ground
screw to a conļ¬rmed ground point before plugging the device into the mains.
Improper grounding can result in electrical shock.
ā¢ Remove the power plug from the AC outlet when cleaning the device.
Power supply/Power cord
Do not open
Water warning
If you notice any abnormality
Power supply/Power cord
Location
Connections
Maintenance
(5)-4 1/2
Product specificaties
| Merk: | Yamaha |
| Categorie: | Versterker |
| Model: | XP1000 |
Heb je hulp nodig?
Als je hulp nodig hebt met Yamaha XP1000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Versterker Yamaha
17 Augustus 2022
23 Maart 2022
24 Maart 2022
26 Maart 2022
2 April 2022
17 Augustus 2022
24 Maart 2022
16 Augustus 2022
8 Februari 2022
17 Augustus 2022
Handleiding Versterker
- Versterker Kenwood
- Versterker Onkyo
- Versterker Pioneer
- Versterker UPC
- Versterker AB International
- Versterker Advance Acoustic
- Versterker Akg
- Versterker Alecto
- Versterker Alto Professional
- Versterker American Audio
- Versterker Ampeg
- Versterker Amplicom
- Versterker Arcam
- Versterker Audica
- Versterker Auna
- Versterker Behringer
- Versterker Bellman
- Versterker Beyerdynamic
- Versterker Bluetech
- Versterker DAP Audio
- Versterker Denon
- Versterker Eden
- Versterker Elektra
- Versterker Engl
- Versterker Fender
- Versterker Fenton
- Versterker Geemarc
- Versterker Harman Kardon
- Versterker Hartke
- Versterker Hifonics
- Versterker HQ Power
- Versterker HUMANTECHNIK
- Versterker Iriver
- Versterker Koda
- Versterker Konig Electronic
- Versterker Luxman
- Versterker Marantz
- Versterker Marquant
- Versterker Marshall
- Versterker MaxGear
- Versterker Monacor
- Versterker NAD
- Versterker Naim
- Versterker Nedis
- Versterker Novero
- Versterker Peavy
- Versterker Power Dynamics
- Versterker Pyle
- Versterker Quadral
- Versterker Randall
- Versterker Reloop
- Versterker Rotel
- Versterker Samson
- Versterker Sansui
- Versterker Sherwood
- Versterker Skytec
- Versterker Skytronic
- Versterker Stagg
- Versterker Tangent
- Versterker Teac
- Versterker Tronics
- Versterker Velodyne
- Versterker Vonyx
- Versterker Ibiza Sound
Nieuwste handleidingen voor Versterker
24 December 2023
24 December 2023
16 September 2023
16 September 2023
15 September 2023
17 September 2023
15 September 2023
15 September 2023
15 September 2023
15 September 2023