Yamaha Soavo-900SW Handleiding

Yamaha Subwoofer Soavo-900SW

Lees hieronder de 📖 handleiding in het Nederlandse voor Yamaha Soavo-900SW (142 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 59 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/142

Soavo-900SW

SUBWOOFER SYSTEM

ENCEINTE A CAISSON DE GRAVE

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

i En

Thank you for selecting this YAMAHA subwoofer system.

Please read the following operating precautions before use.

YAMAHA will not be held responsible for any damage and/or

injury caused by not following the cautions below.

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this unit in a cool, dry, clean place - away from

windows, heat sources, sources of excessive vibration, dust,

moisture and cold. Avoid sources of humming (transformers,

motors).

3 Never open the cabinet. If something drops into the set, contact

your dealer.

4 The voltage to be used must be the same as that specified on

the rear panel. Using this unit with a higher voltage than

specified is dangerous and may cause a fire and/or electric

shock.

5 To reduce the risk or fire or electric shock, do not expose this

unit to rain or moisture.

6 Do not use force on switches, controls or connection wires.

When moving the unit, first disconnect the power plug and the

wires connected to other equipments. Never pull the wires

themselves.

7 When not planning to use this unit for a long period (ie.,

vacation, etc.), disconnect the AC power plug from the wall

outlet.

8 Since this unit has a built-in power amplifier, heat will radiate

from the rear panel. Place the unit apart from the walls,

allowing at least 20 cm of space above, behind and on both

sides of the unit to prevent fire or damage. Furthermore, do not

position with the rear panel facing down on the floor or other

surfaces.

9 Do not cover the rear panel of this unit with a newspaper, a

tablecloth, a curtain, etc. in order not to obstruct heat radiation.

If the temperature inside the unit rises, it may cause fire,

damage to the unit and/or personal injury.

10 Do not place the following objects on this unit:

- Glass, china, small metallic etc.

If glass etc. falls by vibrations and breaks, it may cause bodily

injury.

- A burning candle etc.

If the candle falls by vibrations, it may cause fire and bodily

injury.

- A vessel with water in it

If the vessel falls by vibrations and water spills, it may cause

damage to the speaker, and/or you may get an electric shock.

11 Do not place this unit where foreign objects such as water drips

might fall. It might cause a fire, damage to this unit, and/or

personal injury.

12 Never put a hand or a foreign object into the YST port located

on the front side of this unit. When moving this unit, do not

hold the port as it might cause personal injury and/or damage

to this unit.

13 Never place a fragile object near the YST port of this unit. If

the object falls or drops by the air pressure, it may cause

damage to the unit and/or personal injury.

14 Never open the cabinet. It might cause an electric shock since

this unit uses a high voltage. It might also cause personal injury

and/or damage to this unit.

15 When using a humidifier, be sure to avoid condensation inside

this unit by allowing enough spaces around this unit or

avoiding excess humidification. Condensation might cause a

fire, damage to this unit, and/or electric shock.

16 Super-bass frequencies reproduced by this unit may cause a

turntable to generate a howling sound. In such a case, move

this unit away from the turntable.

17 This unit may be damaged if certain sounds are continuously

output at high volume level. For example, if 20 Hz-50 Hz sine

waves from a test disc, bass sounds from electronic

instruments, etc. are continuously output, or when the stylus of

a turntable touches the surface of a disc, reduce the volume

level to prevent this unit from being damaged.

18 If you hear distorted noise (i.e., unnatural, intermittent

“rapping” or “hammering” sounds) coming from this unit,

reduce the volume level. Extremely loud playing of a movie

soundtrack’s low frequency, bass-heavy sounds or similarly

loud popular music passages can damage this speaker system.

19 Vibration generated by super-bass frequencies may distort

images on a TV. In such a case, move this unit away from the

TV set.

20 Do not attempt to clean this unit with chemical solvents as this

might damage the finish. Use a clean, dry cloth.

21 Be sure to read the “TROUBLESHOOTING” section

regarding common operating errors before concluding that the

unit is faulty.

22 Install this unit near the wall outlet and where the AC power

plug can be reached easily.

23 The batteries shall not be exposed to excessive heat such as

sunshine, fire or the like.

24 Secure placement or installation is the owner’s

responsibility. YAMAHA shall not be liable for any

accident caused by improper placement or installation of

speakers.

CAUTION: Read this before operating your unit.

This unit features a magnetically shielded design, but

there is still a chance that placing it too close to a TV set

might impair picture color. Should this happen, move

this unit away from the TV set.

This unit is not disconnected from the AC power source

as long as it is connected to the wall outlet, even if this

unit itself is turned off. In this state, this unit is designed

to consume a very small quantity of power.

1 En

English

• VOLTAGE SELECTOR

(Asia and General models only)

The voltage selector switch on the rear panel of this

unit must be set for your local main voltage BEFORE

plugging this unit into the AC main supply. Voltages

are 110/120/220/230-240 V AC, 50/60 Hz.

For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

Note: The plug severed from the mains lead must be

destroyed, as a plug with bared flexible cord is hazardous

if engaged in a live socket outlet.

SPECIAL INSTRUCTIONS FOR U.K. MODEL

GETTING STARTED ............................................. 2

Features .................................................................. 2

About this manual .................................................. 2

Supplied accessories ............................................. 2

Controls and functions........................................... 3

Preparing the remote control................................. 5

PLACEMENT ........................................................ 6

CONNECTIONS .................................................... 7

Connecting to the amplifier equipped

with subwoofer (line out) terminal(s) ........................ 7

Connecting to an amplifier not equipped

with a subwoofer (line out) terminal

........................ 9

Connecting to the ground terminal ..................... 12

Connecting the power cable ................................ 12

USING THIS UNIT ............................................... 13

Adjusting the sound balance............................... 13

Storing the sound balance settings.................... 14

Setting the sleep timer ......................................... 14

Operating the power of this unit using

the remote control of your amplifier ................... 15

Frequency response............................................. 16

Advanced Yamaha

Active Servo Technology II ............................... 17

TROUBLESHOOTING ........................................ 18

SPECIFICATIONS .............................................. 19

IMPORTANT:

THE WIRES IN MAINS LEAD ARE COLOURED

IN ACCORDANCE WITH THE FOLLOWING

CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows: The wire which is coloured

BLUE must be connected to the terminal which is

marked with the letter N or coloured BLACK. The

wire which is coloured BROWN must be connected

to the terminal which is marked with the letter L or

coloured RED. Making sure that neither core is

connected to the earth terminal of the three pin plug.

CONTENTS

Product specificaties

Merk:	Yamaha
Categorie:	Subwoofer
Model:	Soavo-900SW
Kleur van het product:	Bruin
Materiaal:	Hout
Gemiddeld vermogen subwoofer:	600 W
Subwoofertype:	Actieve subwoofer
Frequentiebereik subwoofer:	18 - 160 Hz
Breedte van de subwoofer:	410 mm
Hoogte van de subwoofer:	457 mm
Diepte van de subwoofer:	462 mm
Gewicht subwoofer:	32000 g
Diameter driver subwoofer:	250 mm