Yamaha soavo 2 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Yamaha soavo 2 (26 pagina's) in de categorie Luidspreker. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/26
1 En
English Français Deutsch Español
Thank you for selecting this Yamaha product.
Read this before using the speaker.
• To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
• Install the speaker in a cool, dry, clean place - away from
windows, heat sources, sources of excessive vibration,
dust, moisture and cold. Avoid sources of humming
(transformers, motors). To prevent fire or electrical shock,
do not expose the speaker to rain or water.
• To prevent the enclosure from warping or discoloring, do not
place the speaker where it will be exposed to direct sunlight
or excessive humidity.
• Do not place the following objects on the speaker:
Glass, china, etc.
- If glass etc. falls by vibrations and breaks, it may cause
personal injury.
A burning candle etc.
- If the candle falls by vibrations, it may cause fire and
personal injury.
A vessel with water in it
- If the vessel falls by vibrations and water spills, it may
cause damage to the speaker, and/or you may get an
electric shock.
• Do not place the speaker where foreign objects such as
water drips might fall. It might cause a fire, damage to the
speaker, and/or personal injury.
• Do not place the speaker where it is liable to be knocked
over or struck by falling objects. Stable placement will also
ensure better sound performance.
• Placing the speaker on the same shelf or rack as the
turntable can result in feedback.
• Never put a hand or a foreign object into the port located on
the rear of the speaker as this might cause personal injury
and/or damage to the speaker.
• When moving the speaker, do not hold the port as it might
cause personal injury and/or damage to the speaker.
• Any time you note distortion, reduce the volume control on
your amplifier to a lower setting. Never allow your amplifier
to be driven into “clipping”. Otherwise the speaker may be
damaged.
• When using an amplifier with a rated output power higher
than the nominal input power of the speaker, care should be
taken never to exceed the speaker’s maximum input.
• Do not attempt to clean the speaker with chemical solvents
as this might damage the finish. Use a clean, dry cloth.
• Do not attempt to modify or fix the speaker. Contact
qualified Yamaha service personnel when any service is
needed. The cabinet should never be opened for any
reasons.
• Secure placement or installation is the owner’s
responsibility. Yamaha shall not be liable for any
accident caused by improper placement or installation
of the speaker.
PRECAUTIONS
Soavo-2
OWNER’S MANUAL
SPEAKER SYSTEM
UGET
2 En
Place the speakers on a sturdy, vibration-free surface, or on a
well-built stand.
â– Using as 2ch stereo speakers
Better stereo images will be obtained when the speakers are
slightly angled in towards the listeners.
â– Using as front speakers in a multi
channel system
Position the speakers on both sides of the TV. The positioning
of speakers is important, because it controls the whole sound
quality of a multi channel system. Set up the speakers on the
basis of your listening position by following the owner’s
manual supplied with your amplifier.
Placing this unit too close to a TV set might impair picture
color or create a buzzing noise. Should this happen, move
the speaker away (more than 20 cm (7-7/8”)) from the TV
set.
PLACING THE SPEAKERS
Speaker layout image
Note
Soavo-2
Surround
Subwoofer
Center
Yamaha speaker stand SPS-900 (option)
You can use this unit as a floor stand speaker when
installing on an SPS-900.
In this case, use screw holes on the bottom of this unit.
• For details about installing, refer to the assembly
instruction of SPS-900.
• To avoid accidents resulting from tripping over loose
speaker cables, fix them to the floor.
• Do not fasten the speaker on the stand with nails or
adhesives, etc. Long time use and vibrations may
cause this unit to fall down.
• Do not pinch the cables between the speaker and the
stand.
Notes
Yamaha speaker
stand SPS-900
Screw holes
Diameter: 4 mm (5/32”)
Hole depth: 13 mm (1/2”)
Bottom view
(Front side)
135 mm (5-5/16”)
3 En
English
This speaker system is capable of standard connections and bi-wired connections. Before making
connections, make sure that the amplifier is switched off.
â– CONNECTIONS
You need a commercially available speaker cable.
y
The size and/or material of a speaker cable affects on the
sound quality. Therefore, we recommend you purchase a
high-quality speaker cable to exert the performance of this
unit.
• Connect the screw-type terminals at the rear of the
speakers to the speaker terminals on the amplifier with
a speaker cable (sold separately).
• Connect the + terminals on the amplifier and the
speakers using one side of the cable. Connect the –
terminals on both components using the other side of
the cable.
• Connect one speaker to the left (L) terminals of your
amplifier, and another speaker to the right (R) terminals,
making sure not to reverse the polarity (+, –). If one
speaker is connected with reversed polarity, the sound
will be unnatural and lack bass.
How to connect:
1Loosen the knob.
2Twist the exposed wires of the cable together.
3Insert the bare wire into the hole.
4Tighten the knob and secure the cable.
Test the firmness of the connection by pulling the
cable lightly at the terminal.
• Do not let the bare speaker wires touch each other as
this could damage the speaker and/or the amplifier.
• Do not insert the insulation coating into the hole.
The sound may not be produced.
<Standard connections>
When connecting the speaker cable, leave the jumper
cables in place.
*The terminal hole is 5 mm (3/16”) in diameter.
CONNECTING TO YOUR AMPLIFIER
Notes
Good No Good
10 mm
(3/8”)
SPEAKERS
A
B
L
R
+
+ – –
Tighten
Loosen
Insulation coating
Bare wire
Soavo-2 (R) Soavo-2 (L)
Amplifier
Speaker
terminals of
the amplifier
Jumper cable
Red (+)
Black (–)
Terminal hole*
Connect the + speaker
cable to the upper red
terminal and then
– speaker cable to the
lower black terminal.


Product specificaties

Merk: Yamaha
Categorie: Luidspreker
Model: soavo 2
Kleur van het product: Bruin
Gewicht: 9700 g
Breedte: 220 mm
Diepte: 353 mm
Hoogte: 380 mm
Materiaal behuizing: Hout
Connectiviteitstechnologie: Bedraad
Gemiddeld vermogen: 120 W
Impedantie: 6 Ohm
Audio-uitgangskanalen: 2.0 kanalen
Speaker plaatsing: Tafelblad/Boekenplank
Aantal drivers: 2
Woofer: Ja
Frequentiebereik: 45 - 50000 Hz
Gevoeligheid: 88 dB
Gewicht van het apparaat: 19400 g
Bass reflex: Ja
Luidspreker soort: 2-weg
Versterker: Nee
Diameter woofer: 6.5 "
Aantal woofer drivers: 1
Diameter hogetonenluidspreker: 1 "
Aantal tweeter drivers: 1
Tweeter: Ja
Crossover frequentie: 3000 Hz

Heb je hulp nodig?

Als je hulp nodig hebt met Yamaha soavo 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Luidspreker Yamaha

Handleiding Luidspreker

Nieuwste handleidingen voor Luidspreker

Nikkei

Nikkei NWS04 Handleiding

26 Oktober 2024
JBL

JBL AS5 Handleiding

2 November 2024
Envivo

Envivo ENV-1690 Handleiding

21 December 2023
JBL

JBL 4367 Handleiding

25 Oktober 2023
JBL

JBL 4349 Handleiding

25 Oktober 2023
JBL

JBL B-8IC Handleiding

25 Oktober 2023
JBL

JBL B-6ICDT Handleiding

25 Oktober 2023
KEF

KEF c5 Handleiding

8 Oktober 2023