Yamaha Electone ELA-1 Handleiding

Yamaha Keyboard Electone ELA-1

Lees hieronder de 📖 handleiding in het Nederlandse voor Yamaha Electone ELA-1 (120 pagina's) in de categorie Keyboard. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/120
EN
ELA-1
Owners Manual
Thank you for purchasing this Yamaha Electone.
This instrument has a wide selection of Voices and versatile
functions which gives you the potential of highly entertaining
performance. We recommend that you read this manual carefully
so that you can fully take advantage of the advanced and
convenient functions of the instrument. We also recommend that
you keep this manual in a safe and handy place for future
reference.
Before using the instrument, be sure to read “PRECAUTIONS”
on pages 2 – 3.
For information on assembling the instrument, refer to the
instructions on pages 106 – 110.
ELA-1 Owners Manual
2
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
WARNING
This AC adaptor is designed for use with only Yamaha electronic
instruments. Do not use for any other purpose.
Indoor use only. Do not use in any wet environments.
CAUTION
When setting up, make sure that the AC outlet is easily accessible. If
some trouble or malfunction occurs, immediately turn off the power
switch of the instrument and disconnect the AC adaptor from the
outlet. When the AC adaptor is connected to the AC outlet, keep in
mind that electricity is flowing at the minimum level, even if the power
switch is turned off. When you are not using the instrument for a long
time, make sure to unplug the power cord from the wall AC outlet.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the
following:
Do not place the power cord near heat sources such as heaters or
radiators. Also, do not excessively bend or otherwise damage the cord,
or place heavy objects on it.
Only use the voltage specified as correct for the instrument. The
required voltage is printed on the name plate of the instrument.
Use the specified adaptor (page 113) only. Using the wrong adaptor
can result in damage to the instrument or overheating.
Use only the supplied power cord/plug.
Check the electric plug periodically and remove any dirt or dust which
may have accumulated on it.
This instrument contains no user-serviceable parts. Do not open the
instrument or attempt to disassemble or modify the internal
components in any way. If it should appear to be malfunctioning,
discontinue use immediately and have it inspected by qualified
Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or
wet conditions, or place on it any containers (such as vases, bottles or
glasses) containing liquids which might spill into any openings. If any
liquid such as water seeps into the instrument, turn off the power
immediately and unplug the power cord from the AC outlet. Then have
the instrument inspected by qualified Yamaha service personnel.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit. A burning item
may fall over and cause a fire.
For the AC adaptor
For the instrument
Power supply/AC adaptor
Do not open
Water warning
Fire warning
DMI-7 1/2
ELA-1 Owner’s Manual 3
Do not place the bench in an unstable position where it might
accidentally fall over.
Do not play carelessly with or stand on the bench. Using it as a tool or
stepladder or for any other purpose might result in accident or injury.
Only one person should sit on the bench at a time, in order to prevent
the possibility of accident or injury.
Keep special watch over any small children so that they don’t fall off
the rear of the bench. Since the bench does not have a backrest,
unsupervised use may result in accident or injury.
When one of the following problems occur, immediately turn off the
power switch and disconnect the electric plug from the outlet. Then
have the device inspected by Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.
- If any cracks or breakages exist on the instrument.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
Do not connect the instrument to an electrical outlet using a multiple-
connector. Doing so can result in lower sound quality, or possibly
cause overheating in the outlet.
When removing the electric plug from the instrument or an outlet,
always hold the plug itself and not the cord. Pulling by the cord can
damage it.
Remove the electric plug from the outlet when the instrument is not to
be used for extended periods of time, or during electrical storms.
Assemble the stand and bench in the proper sequence by following the
assembly instructions in this manual (page 106). Also, make sure to
tighten the bolts regularly. Failure to do so might result in damage to
the instrument or even injury.
Do not place the instrument in an unstable position where it might
accidentally fall over.
When transporting or moving the instrument, always use two or more
people. Attempting to lift the instrument by yourself may damage your
back, result in other injury, or cause damage to the instrument itself.
Before moving the instrument, remove all connected cables, to prevent
damage to the cables or injury to anyone who might trip over them.
Do not move the stand when the Main unit is placed on it. Doing so
could cause the Main unit to drop off from the stand, resulting in
damage to the instrument or other property, and possibly causing
injury to you or others.
When setting up the product, make sure that the AC outlet you are
using is easily accessible. If some trouble or malfunction occurs,
immediately turn off the power switch and disconnect the plug from the
outlet. Even when the power switch is turned off, electricity is still
flowing to the product at the minimum level. When you are not using
the product for a long time, make sure to unplug the power cord from
the wall AC outlet.
Use only the provided stand. Failure to do so could cause damage to
the internal components or result in the instrument falling over.
Before connecting the instrument to other electronic components, turn
off the power for all components. Before turning the power on or off for
all components, set all volume levels to minimum.
Be sure to set the volumes of all components at their minimum levels
and gradually raise the volume controls while playing the instrument to
set the desired listening level.
Do not insert a finger or hand in any gaps on the instrument.
Never insert or drop paper, metallic, or other objects into the gaps on
the panel or keyboard. This could cause physical injury to you or
others, damage to the instrument or other property, or operational
failure.
Do not rest your weight on, or place heavy objects on the instrument,
and do not use excessive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of
time at a high or uncomfortable volume level, since this can cause
permanent hearing loss. If you experience any hearing loss or ringing
in the ears, consult a physician.
Do not place your hand between moving parts. Otherwise, your hand
could be pinched between the parts, possibly resulting in injury.
Always turn the power off when the instrument is not in use.
Even when the [ ] (Standby/On) switch is in standby status (display is off), electricity is still flowing to the instrument at the minimum level.
When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.
Using the bench If you notice any abnormality
Power supply/AC adaptor
Assembly
Location
Connections
Handling
Using the bench
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
DMI-7 2/2


Product specificaties

Merk: Yamaha
Categorie: Keyboard
Model: Electone ELA-1

Heb je hulp nodig?

Als je hulp nodig hebt met Yamaha Electone ELA-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Keyboard Yamaha

Handleiding Keyboard

Nieuwste handleidingen voor Keyboard