Yamaha DHR10 Handleiding

Yamaha Speaker DHR10

Lees hieronder de 📖 handleiding in het Nederlandse voor Yamaha DHR10 (24 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 72 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
Owners Manual
Benutzerhandbuch
Mode d’emploi
Manual de instrucciones
Manual do Proprietário JA
RU
KO
IT
PT
ES
FR
DE
EN
POWERED SPEAKER SYSTEM
ZH
Manuale di istruzioni
Руководство пользователя
DHR Series
2
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions con-
tained in this manual, meets FCC requirements. Modifications not
expressly approv bed y Yamaha may void your authority, granted
by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories
and/or another produ uct se only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all
installation instructions. Failure to follow instructions cou vld oid
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with
the requirements listed in FCC Regulations, Part 15 for Class “B”
digital dev wices. Compliance ith these requirements provides a
reasonable lev uel of ass rance that you u ur se of this prod ct in a
residential env wironment ill not result in harmful interference with
other electronic devices. This equipment generates/uses radio
frequencies and, if not installed and used according to the
instructions found in the users manual, may cause interference
harmful to the operation of other electronic devices. Compliance
w u uith FCC reg lations does not g arantee that interference will not
occur in all installations. If this product is fou b und to e the so rce of
interference, which can be determined by turning the unit “OFF”
and “ON, please try to eliminate the problem by using one of the
following measures:
Relocate either this product or the device that is being affected by
the interference.
Utilize power outlets that are on different branch (circu bit reaker
or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change
the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type
of product. If you can not locate the appropriate retailer, please
contact Yamaha Corporation of America, Electronic Service Divi-
sion, 6600 Orangethorpe Ave, Buena Park, CA90620
The ab vo e statements apply ONLY to those products distributed
by Yamaha Corporation of America or its subsidiaries.
(class B)
FCC INFORMATION (U.S.A.)
(FCC SDoC)
COMPLIANCE INFORMATION STATEMENT
(Suppliers declaration of conformity procedure)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Av ue., B ena Park, Calif. 90620
Telephone : 714-522-9011
Type of Equipment : POWERED SPEAKER SYSTEM
Model Name : DHR15, DHR12M, DHR10
This dev wice complies ith Part 15 of the FCC Rules.
Operation is s ject to the folloub wing two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference that may cause
undesired operation.
3
PRECAUTIONS
PLEASE READ CAREFULLY
BEFORE PROCEEDING
Please keep this manual in a safe place for
f tu ure reference.
WARNING
Always follow the basic precautions listed below to
avoid the possibility of serious injury or even death from
electrical shock, short-circuiting, damages, fire or other
hazards. These precautions include, but are not limited
to, the following:
If you notice any abnormality
If any of the following problems occur, immediately turn off
the power switch and disconnect the electric plug from the
outlet.
- The power cord or plug becomes frayed or damaged.
- Unusual smells or smoke are emitted.
- Some object, or water has been dropped into the product.
- There is a sudden loss of sound during use of the product.
- Cracks or other visible damage appear on the product.
Then have the product inspected or repaired by qualified
Yamaha service personnel.
Power supply
Do not place the power cord near heat sources such as
heaters or radiators, and do not excessively bend or
otherwise damage the cord, place heavy objects on it, or
place it in a position where anyone could walk on, trip over, or
roll anything over it.
Only use the voltage specified as correct for the product. The
required voltage is printed on the name plate of the product.
Use only the supplied power cord.
If you intend to use the product in an area other than in the
one you purchased, the included power cord may not be
compatible. Please check with your Yamaha dealer.
Check the electric plug periodically and remove any dirt or
dust which may have accumulated on it.
Make sure to fully insert the electric plug to prevent electric
shocks or fire.
When setting up the product, make sure that the AC outlet
you are using is easily accessible. If some trouble or
malfunction occurs, immediately turn off the power switch
and disconnect the plug from the outlet. Even when the
power switch is turned off, as long as the power cord is not
unplugged from the wall AC outlet, the product will not be
disconnected from the power source.
Remove the electric plug from the outlet when the product is
not to be used for extended periods of time.
Do not touch the product or the electric plug during an
electrical storm.
Be sure to connect to an appropriate outlet with a protective
grounding connection. Improper grounding can result in
electrical shock, fire, or damage.
Do not open
This product contains no user-serviceable parts. Do not
attempt to disassemble the internal parts or modify them in
any way.
Water warning
Do not expose the product to rain, use it near water or in
damp or wet conditions, or place on it any containers (such
as vases, bottles or glasses) containing liquids which might
spill into any openings.
Never insert or remove an electric plug with wet hands.
Fire warning
Do not place any burning items or open flames near the
product, since they may cause a fire.
Hearing loss
Before turning the power of all devices on or off, make sure
that all volume levels are set to the minimum. Failing to do so
may result in hearing loss, electric shock, or device damage.
When turning on the AC power in your audio system, always
turn on the product LAST, to avoid hearing loss and speaker
damage. When turning the power off, the product should be
turned off FIRST for the same reason.
CAUTION
Always follow the basic precautions listed below to
avoid the possibility of physical injury to you or others.
These precautions include, but are not limited to, the
following:
Power supply
When removing the electric plug from the product or an
outlet, always hold the plug itself and not the cord. Pulling by
the cord can damage it.
Location and connection
Do not place the product in an unstable position or a location
with excessive vibration, where it might accidentally fall over
and cause injury.
Keep this product out of reach of children. This product is not
suitable for use in locations where children are likely to be
present.
Do not block the vents. This product has ventilation holes at
the rear to prevent the internal temperature from becoming
too high. In particular, do not place the product on its side or
upside down. Inadequate ventilation can result in
overheating, possibly causing damage to the product(s), or
even fire.
To ensure proper heat dissipation of the product, when
installing it:
- Do not cover it with any cloth.
- Do not use the product in a confined, poorly-ventilated
location.
Inadequate ventilation can result in overheating, possibly
causing damage to the product(s), or even fire. Make sure
that there is adequate space from the rear: at least 30 cm
above, 30 cm at the sides and 30 cm behind.
PA_en_12 1/2


Product specificaties

Merk: Yamaha
Categorie: Speaker
Model: DHR10
Kleur van het product: Zwart
Gewicht: 15000 g
Breedte: 305 mm
Diepte: 300 mm
Hoogte: 494 mm
Materiaal behuizing: Multiplex
Bluetooth: Nee
Connectiviteitstechnologie: Bedraad
Type stroombron: AC
Gemiddeld vermogen: 325 W
Stroomverbruik (in standby): 18 W
Aantal per verpakking: 1 stuk(s)
Aanbevolen gebruik: Universeel
Audio-uitgangskanalen: - kanalen
Speaker plaatsing: Muur-montage
Frequentiebereik: 52 - 20000 Hz
Soort magneet: Ferriet
Bass reflex: Ja
Luidspreker soort: 2-weg
Versterker: Ingebouwd
XLR in: Ja
AC-ingangsspanning: 220 - 240 V
AC-ingangsfrequentie: 50/60 Hz
Stroomverbruik (typisch): 60 W
Crossover frequentie: 1900 Hz
Geluidsdruk niveau (max): 128 dB
Versterker klasse: D

Heb je hulp nodig?

Als je hulp nodig hebt met Yamaha DHR10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Yamaha

Handleiding Speaker

Nieuwste handleidingen voor Speaker