Yaesu VX-150 Handleiding

Yaesu Radio VX-150

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Yaesu VX-150 (44 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 64 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/44
YAESU MUSEN CO., LTD.
4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan
YAESU U.S.A.
17210 Edwards Rd., Cerritos, CA 90703, U.S.A.
YAESU EUROPE B.V.
P.O. Box 75525 1118 ZN, Schiphol, The Netherlands
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
YAESU GERMANY GmbH
Am Kronberger Hang 2, D-65824 Schwalbach, Germany
YAESU HK LTD.
11th Floor Tsim Sha Tsui Centre, 66 Mody Rd.,
Tsim Sha Tsui East, Kowloon, Hong Kong
OPERATING MANUAL
Introduction .......................................... 1
Controls & Connectors ........................ 2
Accessories & Options .......................... 3
Basic Operation .................................... 4
Battery Pack Installation and Removal.......4
Antenna Installation ....................................5
Switching Power ON and OFF ...................6
Adjusting the Volume Level .......................6
Squelch Setup .............................................6
Transmitting ................................................6
Frequency Navigation .................................7
Changing the Transmitter Power Level ......7
Changing the Channel Steps .......................7
Repeater Operation .....................................8
Automatic Repeater Shift (ARS) ............8
Manual Repeater Shift Activation ..........8
Setting Repeater Tx Oļ¬€set ......................9
Checking the Repeater
Uplink (Input) Frequency ...9
Keyboard Locking ......................................9
Advanced Operation .......................... 10
VFO Split Mode .......................................10
Receive Battery Saver Setup.....................10
Tx Battery Saver .......................................11
Keypad/LCD Illumination ........................11
Automatic Power-Off (APO) Feature .......12
Checking the Battery Voltage ...................12
Disabling the BUSY/TX LED ..................12
Busy Channel Lock-Out (BCLO) .............12
Disabling the Key pad Beeper ..................13
Programming the Key Functions ..............13
Transmitter Time-Out Timer (TOT) .........13
Tone Calling (1750 Hz) ............................14
ANI Operation (Automatic
Number Identification) ...14
CTCSS Operation .....................................15
DCS Operation .........................................16
Tone Search Scanning ..............................17
To scan for the tone in use ....................17
CTCSS/DCS Bell Operation ....................17
Memory Operation ............................. 18
Contents
Memory Storage .......................................18
Storing Independent Trasmit
Frequencies (ā€œOdd Splitsā€) ...18
Memory Recall .........................................18
Memory Oļ¬€set Tuning .............................19
HOME Channel Memory .........................19
Labeling Memories ...................................19
Masking Memories ...................................20
Memory Only Mode .................................20
Scanning .............................................. 21
Setting the Scan Resume Technique.....21
To set the Scan-Resume mode .............. 21
VFO Scanning .......................................... 21
Memory Scanning .....................................22
How to Skip (Omit) a Channel
During Memory Scan Operatin ...22
Programmable (Band Limit)
Memory Scan (PMS) ...22
Automatic Lamp Illumination
on Scan Stop ...23
Band Edge Beeper .................................... 23
Smart Search Operation ............................ 23
Setting the Smart Search Mode ............ 24
Storing Smart Search Memories ...........24
Priority Channel Scanning
(Dual Watch)...24
DTMF Operation ................................ 26
Manual DTMF Tone Generation .............. 26
DTMF Autodialer .....................................26
To send the telephone number .............. 26
ARTS Operation ................................. 27
Basic ARTS Setup and Operation ............ 27
ARTS Polling Time Options .................... 28
ARTS Alert Beep Options ........................ 28
CW Identiļ¬er Setup .................................. 28
To activate the CW identifier................ 29
Interface of Packet TNCs ................... 30
Reset ..................................................... 30
Cloning................................................. 31
Set Mode .............................................. 32
Speciļ¬cations....................................... 41
VX-150 OPERATING MANUAL 1
The VX-150 is an ultra compact FM hand-held providing up to five watts of RF power and
a wealth of convenient features for the 2m amateur band. The has rubber gasketVX-150
seals around all external controls and connectors to help keep out dust and rain or spray,
assuring years of reliable operation even in harsh environments.
Sixteen multi-function keys provide the ultimate in programmability, with 199 freely tun-
able memories and two VFOs. All memories store repeater shifts or separate tx/rx frequen-
cies, CTCSS (Continuous Tone Controlled Squelch System) or DCS status. You also get
one instant-recall ā€œHomeā€ channel memory and ten special purpose memories for limited
subband tuning/scanning. Busy channel band or selective memory scanning is provided
along with priority channel monitoring; 1 MHz up/down stepping; ARS (automatic re-
peater shift) when tuned to repeater subbands; plus a top panel rotary dial for memory and
frequency selection. The keypad serves as a DTMF encoder during transmission, and up to
9 DTMF memories can store 16 digits each for quick playback of commonly used num-
bers.
The liquid crystal display shows seven frequency digits, memory selection, CTCSS tone
frequency, and includes a bargraph S/PO meter. Yaesuā€™s power saver system can be set by
the operator for optimum sampling/standby ratio, or can be turned off for packet operation.
And our new APO (Automatic Power Off) system shuts off the transceiver to avoid dead
batteries if you doze off or are called away unexpectedly.
Operation under difficult conditions is simplified by a lamp button illuminating the display
and backlit translucent keypad, diatonically assigned function-dependent keypad beeps.
Please read this manual carefully to gain a full understanding of the features of the VX-
150.
Introduction


Product specificaties

Merk: Yaesu
Categorie: Radio
Model: VX-150

Heb je hulp nodig?

Als je hulp nodig hebt met Yaesu VX-150 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Radio Yaesu

Handleiding Radio

Nieuwste handleidingen voor Radio