Yaesu FTM-400XDE Handleiding
Yaesu
Zendamateur
FTM-400XDE
Lees hieronder de š handleiding in het Nederlandse voor Yaesu FTM-400XDE (221 pagina's) in de categorie Zendamateur. Deze handleiding was nuttig voor 123 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/221
Before Using
Installation and Connection
Basic Operations
DG-ID / DP-ID Function
Using the Memory
Scanning
Using the GPS Function
Using the APRS Function
Using the GM Function
Using the WIRES-X Function
Convenient Functions
Functions to be used
when Necessary
Customize Menu Settings
and User Preferences
Appendix
144/430MHz 50W
DUAL BAND TRANSCEIVER
C4FM/FM
Operating Manual
FTM-400XDR/DE
2
Before Using
Introduction
Features of this radio
ļ 144/430 MHz dual band mobile radio equipped with standard C4FM digital
communication modem
ļ Clear audio and data communication is achieved using the digital modem functions
ļ Wide band receive in the 108 MHz to 999 MHz range (wireless business, public service
and air band)
ļ Transmit power 50 watts with cooling fan
ļ Full color 3.5-inch LCD, high luminance TFT touch panel controller
ļ Intuitive, user touch panel operation
ļ With the DG-ID (Digital Group ID) feature, the Group Monitor (GM) feature enables
automatically locating, and communicating with other stations that have the same DG-
ID number within contact range, by utilizing a matching group ID number from 00 to 99.
ļ The Digital Personal ID (DP-ID) feature may communicate only by the transceivers
registered the individual ID information that is different for each transceiver included in
the transmission radio wave of C4FM digital communication.
ļ 500 memory channels in the Band A (band at the top of the display) and 500 channels
in the Band B (band at the bottom of the display)
ļ The frequency and settings memories can be saved, using a micro-SD card. The data
in the micro-SD card can easily be copied to other radios
ļ Diverse range of scanning functions (VFO scan, memory scan etc.)
ļ Built-in GPS receiver unit, location and movement information can be displayed and
GPS data can be output to connected devices
ļ Incorporated APRSĀ® functions. Position, movement data and messages can be
communicated to other stations, digipeaters and the Internet.
*Refer to the separate āAPRS Operating Manualā
ļ Equipped with GM (Group Monitor) function
*Refer to the separate āGM Operating Manualā
ļ Supports Yaesu WIRES-X Internet linking, providing communication with remote
partners using the Internet
*Refer to the separate āWIRES-X Operating Manualā
ļ Bluetooth adaptor unit BU-2 (sold separately) permits hands-free operation
ļ Voice guide unit FVS-2 (sold separately) provides frequency voice announcement, and
recording of received audio
ļ Camera-equipped microphone MH-85A11U (sold separately). Images taken with the
camera can be transmitted to other stations, and also shown on the LCD display.
* The APRS, GM and WIRES-X Operating Manuals are not included with the product.
Please download them from the Yaesu website.
3
Before Using
Introduction
Important precautions for mobile radio operation
ļ The use of protective tape or covering is recommended to protect the wiring and the
power cord inside the vehicle.
ļ When installing the unit inside a vehicle, locate the radio, antenna, co-axial cable, etc.
at least 20 cm away from the following control equipment.
āī Engine-related:ī Fuelīinjectionīequipmentīandīengineīcontrol
āī Transmission-related:īTransmissionīandī4WDīelectronicīcontrolīunit
āī Others:ī ECS/EPS/ABS/ETACS/Fullyīautomaticīair-conditioner/
Auto-heaterīcontrolīunit/Gīsensor
ļ Install the antenna and co-axial cable away from the control unit and wiring harness.
Place all cables so they do not entangle and impede the driver or passengers. Never
place any equipment in a location where it may pose a danger to the passengers,
where it may interfere with driving, or obstruct the driver field of view.
ļ Do not install any apparatus in such a way that it may interfere with the proper operation
of the air bags.
ļ After installing the radio, check that the brake lamp, head lamp, turning indicator lights,
wiper, etc. are working normally with the radio power switched on.
ļ Keep full attention on driving, do not operate the radio controls or look at the radio
display while driving. Stop the vehicle at a safe location, before operating the radio
controls or looking at the display.
ļ Do not drive the car in such a way that external sounds required for safe driving cannot
be heard. Most areas and districts prohibit the use of earphones and headphones
while driving.
ļ When using the radio transmitter, if it appears to have abnormal effects on the control
equipment of the vehicle, stop the engine, turn off the power supply, and disconnect
the power cord. Resolve the problem before continuing to operate the radio equipment.
ļ When using the radio in an electric or hybrid car, the receiver may experience high RF
interference and noise from the inverters that are built into the electric vehicle.
Product specificaties
| Merk: | Yaesu |
| Categorie: | Zendamateur |
| Model: | FTM-400XDE |
Heb je hulp nodig?
Als je hulp nodig hebt met Yaesu FTM-400XDE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zendamateur Yaesu
28 Maart 2023
28 Maart 2023
28 Maart 2023
28 Maart 2023
28 Maart 2023
28 Maart 2023
28 Maart 2023
28 Maart 2023
28 Maart 2023
28 Maart 2023
Handleiding Zendamateur
Nieuwste handleidingen voor Zendamateur
29 Maart 2022