XPG Gammix S7 Handleiding

XPG Solid state drives (ssd) Gammix S7

Lees hieronder de 📖 handleiding in het Nederlandse voor XPG Gammix S7 (4 pagina's) in de categorie Solid state drives (ssd). Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

INSTALLING A M.2 SSD

ON A DESKTOP PC

1. GATHER THE THINGS YOU'LL

NEED

*Please use a standard Phillips screwdriver (3.5mm) for

disassembling the case; and a smaller Phillips screwdriver

for installing the M.2 solid state drive as it uses screws

with a diameter of 1.85-1.98mm

PC, Phillips screwdrivers, and ADATA M.2

SSD

2. BACK UP YOUR DATA

Make sure to backup the important data on

your PC to an external device, such as an

external HDD, before starting installation.

3. POWER OFF YOUR PC

After backing up your data, power off your PC

to avoid data loss or damage to other

components during installation.

4. SWITCH OFF THE POWER

SWITCH AND UNPLUG POWER

CORD

*The location of the power switch may vary by PC,

please check your user manual.

This action is necessary to discharge residual

power that can damage your PC and its

components.

BEFORE INSTALLATION

*The location of slots may vary by PC. Please check your

PC's user manual for more information.

**Generally speaking, the screws that secure the SSD in

place will be installed on the motherboard when the PC is

shipped from the factory.

* The slot has a foolproof design. Please insert the SSD

in the direction corresponding to the pins on the solid

state drive and the slot. Do not insert it forcibly to avoid

damage to the product.

INSTALLATION

Use the standard Philips screwdriver to remove

the screws and then remove the PC case

2. LOCATE THE M.2 PCIE SLOT

AND CONFIRM THERE ARE

SCREWS

Locate the M.2 PCIe slot, ensure the SSD will

fit, and confirm there are screws present.

3. ALIGN THE M.2 SLOT AND

INSERT THE SOLID STATE DRIVE

Use your small Phillips screwdriver to remove

the screws on the motherboard. Align the

notches in the SSD with the ridges in the PCIe

slot, then insert at a an angle. Give it a final

push to ensure it is securely in place.

4. FASTEN THE SCREWS TO

SECURE THE SSD

Use your small Phillips screwdriver to secure

the SSD into place.

1. REMOVE THE PC CASE

Product specificaties

Merk:	XPG
Categorie:	Solid state drives (ssd)
Model:	Gammix S7
Gewicht:	11.2 g
Breedte:	22 mm
Diepte:	80 mm
Hoogte:	3.7 mm
Interface:	PCI Express 3.0
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-40 - 85 °C
SSD capaciteit:	512 GB
SSD-vormfactor:	M.2
Mean time between failures (MTBF):	2000000 uur
Type geheugen:	3D NAND
Leessnelheid:	3500 MB/s
Schrijfsnelheid:	3000 MB/s
Component voor:	PC
Schokbestendigheid:	1500 G
Bedrijfstemperatuur (T-T):	0 - 70 °C
Hardware encryptie:	Nee
NVMe:	Ja
NVMe versie:	1.3
Random read (4KB):	300000 IOPS
Random write (4KB):	240000 IOPS
PCI Express interface data lanes:	x4
TBW-classificatie:	1280
Sequentiële leessnelheid (ATTO):	3500 MB/s
Sequentiële schrijfsnelheid (ATTO):	1900 MB/s
Sequentiële leessnelheid (AS SSD):	2950 MB/s
Sequentiële schrijfsnelheid (AS SSD):	1600 MB/s
Sequentiële leessnelheid (CDM):	3500 MB/s
Sequentiële schrijfsnelheid (CDM):	2400 MB/s