XPG Gammix S5 Handleiding

XPG Solid state drives (ssd) Gammix S5

Lees hieronder de 📖 handleiding in het Nederlandse voor XPG Gammix S5 (4 pagina's) in de categorie Solid state drives (ssd). Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

INSTALLING A M.2 SSD

ON A LAPTOP PC

BEFORE INSTALLATION

1. GATHER THE THINGS YOU'LL

NEED

*Please use a standard Phillips screwdriver (3.5mm) for

disassembling the case; and a smaller Phillips

screwdriver for installing the M.2 solid state drive as it

uses screws with a diameter of 1.85-1.98mm.

PC, Phillips screwdrivers, and ADATA M.2

SSD

2. BACK UP YOUR DATA

Make sure to backup the important data on

your PC to an external device, such as an

external HDD, before starting installation.

3. POWER OFF YOUR PC

After backing up your data, power off your PC

to avoid data loss or damage to other

components during installation.

4. UNPLUG POWER CORD AND

BATTERY

*The battery removal step applies only to laptops when

it's possible to remove the battery. To see how to remove

the battery, refer to your user manual.

This action is necessary to discharge residual

power that can damage your PC and its

components.

*If you are unsure how to do this, refer to your user

manual

*The location of slots may vary by PC. Please check your

PC's user manual for more information.

**Generally speaking, the screws that secure the SSD in

place will be installed on the motherboard when the laptop

is shipped from the factory.

*The slot has a foolproof design. Please insert the SSD

in thedirection corresponding to the pins on the solid state

drive and the slot. Do not insert it forcibly to avoid damage

to the product.

INSTALLATION

Use your standard Phillips screwdriver to

remove the screws from the back plate.

2. LOCATE THE M.2 PCIe SLOT

AND CONFIRM THERE ARE

SCREWS

Locate the M.2 PCIe slot, ensure the SSD will fit

and confirm there are screws present.

ALIGN THE M.2 SLOT AND INSERT

THE SOLID STATE DRIVE

Use your small Phillips screwdriver to remove

the screws on the motherboard. Align the

notches in the SSD with the ridges in the PCIe

slot, then insert at a an angle. Give it a final

push to ensure it is securely in place.

4. FASTEN THE SCREWS TO

SECURE THE SSD

*Do not overtighten the screws

Use your small Phillips screwdriver to secure

the SSD into place.

1. REMOVE YOUR PC'S BACK

PLATE

Product specificaties

Merk:	XPG
Categorie:	Solid state drives (ssd)
Model:	Gammix S5
Gewicht:	11.2 g
Breedte:	22 mm
Diepte:	80 mm
Hoogte:	3.7 mm
Type verpakking:	Doos
Minimum operationele temperatuur:	0 °C
Maximale temperatuur (in bedrijf):	70 °C
Interface:	PCI Express 3.0
Duurzaamheidscertificaten:	CE, RoHS
Temperatuur bij opslag:	-40 - 85 °C
SSD capaciteit:	2000 GB
ECC:	Ja
SSD-vormfactor:	M.2
Mean time between failures (MTBF):	2000000 uur
Type geheugen:	3D TLC
Leessnelheid:	2100 MB/s
Schrijfsnelheid:	1500 MB/s
Component voor:	PC
Schokbestendigheid:	1500 G
Bedrijfstemperatuur (T-T):	0 - 70 °C
Hardware encryptie:	Nee
NVMe:	Ja
NVMe versie:	1.3
Random read (4KB):	250000 IOPS
Random write (4KB):	240000 IOPS
Optische drivecontroller:	Realtek
PCI Express interface data lanes:	x4
TBW-classificatie:	1200
Sequentiële leessnelheid (ATTO):	2100 MB/s
Sequentiële schrijfsnelheid (ATTO):	1400 MB/s
Sequentiële leessnelheid (AS SSD):	1800 MB/s
Sequentiële schrijfsnelheid (AS SSD):	1300 MB/s
Sequentiële leessnelheid (CDM):	2100 MB/s
Sequentiële schrijfsnelheid (CDM):	1500 MB/s