Xiaomi Zhimi UVGI Air Humidifier Handleiding

Xiaomi Niet gecategoriseerd Zhimi UVGI Air Humidifier

Lees hieronder de 📖 handleiding in het Nederlandse voor Xiaomi Zhimi UVGI Air Humidifier (10 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 184 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
Mi Air Humidier
01 Overview
Lid
Lid handle
Hole for steam outlet
Water tank
Water level indicator
Safety cover of built-in
antibacterial UV lamp
Ball, indicating water
level
Plate, spraying
a steam
Air outlet hole
Bactericidal UV lamp
The unit base
(base)
Power button / switch
modes
Mode indicator
Water volume indicator/
Status of the device
Adaptor
АС power cable
02 Setting
Installing the main unit
Three parts of the humidier
(lid handle, cover and base unit
(base)) collected, when marks,
shown in the rear of the device
are aligned.
Wi-Fi indicator
Light adjusting button
Air input hole
DC power cable
03 Usage
Proper device positioning
Place the humidier on exposed
surfaces. The humidier should
be located away from walls,
furniture, appliances, etc., things
would not accumulate
moisture.
Adding a water
Open the lid and pour a water into the tank.
Please do not spill water, and do not pour too
much water (water should not exceed the MAX
mark).
The water used: household water, mineral water,
puried water. Do not use distilled water.
maximum water
level
04 Usage
Connecting power adapter
It is necessary to distinguish between DC power
cable and AC cable. By connecting the DC cable
to AC adapter, be guided by side with the image
of the negative pole.
Cnnecting АС cable
Connect AC cable to power
supply.
Light management
To operate a light you need
to press the button on a
rear side of the humidier.
Each press of the button
allows you to control light
switch lighting modes:
continuous light, ashing
light, turn o the light.
Connecting to mobile App
To install «Mi Home» app, scan
the QR-Code. Open the app, click
on icon «My Device» and add «Mi
Air Humidier» to your list. After
successfully adding a humidier,
you will nd it in «Smart Devices»
list.
This device is already in a list of Mi Smart Home devices, supports MIUI system and can
interface and interact with other Mi Smart Home devices.
To nd out more information about operation of this device or to purchase other smart
devices, register in Mi Smart Home APP.
05 Usage
On-O/ mode switching
- Turning on
Press the button to turn humidier on.
Mi Air Humidier remembers a mode, established
after last use of the device. When rst using the
device, a default is 1st mode.
Note: If no water in the tank, the humidier does not
turn on. Please add water rst, and then use the
device.
- Mode switching
Click on the button to switch a mode.
Each time you press the button you switch 1st, 2nd,
3rd mode.
- Shutdown
Press and hold the button for 3 seconds to turn o
the device.
Note: If the humidier is over water, it is
automatically switched o.
- Maximum mode
IWhen the device is o, press and hold the button for 5 seconds to activate maximum
mode. The humidier can work 4.5 hours by default. If water is over the device, it switches
o automatically. Click on the button to turn on 1st mode.
Mode 1 mode 2 mode 3 modeO mode Low
energy
Indicators
Indicators status
Indicators lit Indicator o Indicators ashing
Volume of water / LED status of the device
Mode Work mode Low O mode
water
level
Water is over
Indicators
Indicators lit Indicators o Indicators ashing


Product specificaties

Merk: Xiaomi
Categorie: Niet gecategoriseerd
Model: Zhimi UVGI Air Humidifier

Heb je hulp nodig?

Als je hulp nodig hebt met Xiaomi Zhimi UVGI Air Humidifier stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Xiaomi

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd