WilTec 51658 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor WilTec 51658 (8 pagina's) in de categorie Waterpomp. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
User’s manual
Aquarium Pump Wave Maker CW-110, CW-120, CW-
140, CW-160
51656–51659
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
© by WilTec Wildanger Technik GmbH Item 51656–51659 Page 2
http://www.WilTec.de
http://www.aoyue.eu -1 08 2022
http://www.teichtip.de
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate, and up- -date, errors cannot be ruled out entirely.to
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: service@wiltec.info
Phone: +49 2403 55592–0
Fax: (+49 2403 55592–15)
© by WilTec Wildanger Technik GmbH Item 51656–51659 Page 3
http://www.WilTec.de
http://www.aoyue.eu -1 08 2022
http://www.teichtip.de
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
This vibration pump simulates natural waves like in the ocean and imitates natural whirls; thus, it offers
the fish and other aquatic organisms a species-appropriate surrounding.
Before using this product, read the following instructions for use carefully and keep them.
Safety instructions
CAUTION:
The use of this device is only allowed with a fault current protection switch with a triggering nominal
current up to 30 mA (according to VDE 0100 Article 702 and 738).
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory, and mental abilities or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or follow the instructions made by this person on how to correctly
use the device.
Children should be supervised to ensure that they do not play with the device.
ATTENTION:
• Perform a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
• Only use the device accordingly to the intended purpose stated in this manual.
• You are responsible for the safety of the working zone.
• If the cable or the plug is damaged due to external influences, it must not be repaired. It must
be replaced with a new one. This work may only be carried out by a qualified electrician.
• The voltage of 230 V AC indicated on the nameplate of the device must match the existent
mains voltage.
• The device must never be lifted, transported, or attached by the power cord.
•
• Make sure that the electric plug connections are protected from flood and humidity.
• Always unplug the appliance before working on it.
• Avoid exposing the device to direct water jets or rain.
• The user is responsible for complying with local safety and mounting regulations. Ask an elec-
trician, if necessary.
• In the event of a malfunction of the appliance, repairs must only be carried out by a qualified
electrician.
• Read all safety precautions and instructions. Failure to obey the safety precautions and instruc-
tions might cause an electric shock, a fire, and/or severe injuries.
• Keep all safety precautions and instructions for future use.
Warning notices
• Caution: Please make sure that all pump parts are intact before switching on the wave maker.
Do not connect it to voltage supply sources whose voltage do not match the one indicated on
the device.
• There must be no sand in the pump, otherwise certain components may be destroyed. Damages
caused by presence of sand are not covered by warranty.


Product specificaties

Merk: WilTec
Categorie: Waterpomp
Model: 51658

Heb je hulp nodig?

Als je hulp nodig hebt met WilTec 51658 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Waterpomp WilTec

WilTec

WilTec 63910 Handleiding

7 December 2023
WilTec

WilTec 50967 Handleiding

17 November 2023
WilTec

WilTec 50453 Handleiding

17 November 2023
WilTec

WilTec 52007 Handleiding

17 November 2023
WilTec

WilTec 50965 Handleiding

17 November 2023
WilTec

WilTec 50266 Handleiding

17 November 2023
WilTec

WilTec 50268 Handleiding

17 November 2023
WilTec

WilTec 51541 Handleiding

17 November 2023
WilTec

WilTec 50921 Handleiding

17 November 2023
WilTec

WilTec 51561 Handleiding

17 November 2023

Handleiding Waterpomp

Nieuwste handleidingen voor Waterpomp