WilTec 50919 Handleiding

WilTec Waterpomp 50919

Lees hieronder de 📖 handleiding in het Nederlandse voor WilTec 50919 (6 pagina's) in de categorie Waterpomp. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

Operation Manual

Pool Pump

SPP150E, SPP200E, SPP250E

50919, 50920, 50921

Illustration similar, may vary depending on model

Read and follow the operating instructions and safety information before using for the first time.

Technical changes reserved!

Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.

Updating the documentation

If you have suggestions for improvement or have found any irregularities, please contact us.

https://www.XPOtool.com Item 50919–50921 Page 2

The Tool Experts

08 2022-1

The information contained in this document may alter at any time without previous notice. It is prohibited

to copy or spread any parts of this document in any way without prior written allowance. All rights re-

served.

The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this

operating manual, nor in the diagrams and figures shown.

Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure

that the operating manual complete, faultless, and up to date, mistakes cannot be entirely avoided.is

If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing

from you.

Send an e-mail to:

service@wiltec.info

or use our contact form:

https://www.wiltec.de/contacts/

The most recent version of this manual in various languages can be found in our online shop via:

https://www.wiltec.de/docsearch

Our postal address is:

WilTec Wildanger Technik GmbH

Königsbenden 12

52249 Eschweiler

Germany

To return orders for exchange, repair, or other purposes, please use the following address. Attention!

To allow for a smooth execution of your complaint or return, it is important to contact our customer

service team before returning the goods.

Returns Department

WilTec Wildanger Technik GmbH

Königsbenden 28

52249 Eschweiler

E-mail: service@wiltec.info

Tel: +49 2403 55592–0

Fax: +49 2403 55592–15

https://www.XPOtool.com Item 50919–50921 Page 3

The Tool Experts

08 2022-1

Introduction

Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients

take some basic safety precautions when using this device. Please read the operation instruc-

tions carefully and make sure you have understood its content.

Keep these operation instructions safe.

Features

• Pump body, pump cover and impeller are made of high-quality plastic

• Big outlet, high lift, low noise

• Good mechanical seal and durable.

• With over load protection to ensure long lasting working

• With simple suction and discharge pipes.

Application

These water pumps are designed for the circulation and filtration of the small swimming pools (family

use), whirl pools and Sauna pools.

Caution!

• For swimming pools and garden ponds and its protection zone, the use of the pump is only in

permitted with fault current circuit breaker ( according to DIN VDE 100 part 06.92. 30 mA) 702

Please contact a qualified electrician if you have any questions.

• Keep a safe distance to the pool and fix the pump on a stable base plate According to VDE .

standard is observed a safety distance of 2 m.

• The pump has a built- motor protection switch We do not take over any liability for losses in .

through unsuitable use or faulty assembly. The power cable must conform to standards (2) EC

or type H07 RN- according to VDE 0620.the F

Checks before start-up

1. Make sure that the voltage and frequency power supply and pump (see nameplate) are suit-of

able.

2. Make sure that the pump shaft may rotate freely.

3. Fill the pump with water to make sure that the pump body, filter basket, pipes and other con-

nectors are not leaking. Tighten or loose the screws with hands, or tolls if necessary.

4. Open any existing valves pressure and suction lines check that all hoses are connected.in and

5. Please fill the suction pipe and the pump body completely with water.

6. The pump is suitable for clean water with a temperature of max. 35 ℃.

Power supply

Use the pump only on a three-pole socket with 230 V/ . 50 Hz

Product specificaties

Merk:	WilTec
Categorie:	Waterpomp
Model:	50919
Geluidsniveau:	70 dB
Maximale temperatuur (in bedrijf):	60 °C
Kleur behuizing:	Zwart
Aantal per verpakking:	1 stuk(s)
Ingangsspanning:	230 V
Frequentie:	50 Hz
Maximum werkdruk:	1.6 bar