Whirlpool WRT314TFDW Handleiding

Whirlpool Koelkast WRT314TFDW

Lees hieronder de đź“– handleiding in het Nederlandse voor Whirlpool WRT314TFDW (16 pagina's) in de categorie Koelkast. Deze handleiding was nuttig voor 69 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
W11209379
1
LEARN MORE
In an effort to conserve natural resources, this refrigerator includes a condensed User Guide. A complete User Instructions
manual for your model can be downloaded at www.whirlpool.com/manuals.
For future reference, please make a note of your product model and serial numbers. These can be found on the inside wall
of the refrigerator compartment.
Model Number __________________________________ Serial Number __________________________________
Register your refrigerator at www.whirlpool.com. In Canada, register at www.whirlpool.ca.
Para una version de estas instrucciones en español, visite www.whirlpool.com.
User Guide
Top Mount Refrigerator
You can be killed or seriously injured if you don’t immediately
You can be killed or seriously injured if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the
instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
DANGER
WARNING
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electric shock, or injury to persons when using the , follow basic precautions, including refrigerator
the following:
WARNING:
SAVE THESE INSTRUCTIONS
â– Plug into a grounded 3 prong outlet.
â– Do not remove ground prong.
â– Do not use an adapter.
â– Do not use an extension cord.
â– Disconnect power before servicing.
â– Replace all parts and panels before operating.
â– Remove doors from your old refrigerator.
â– Use nonflammable cleaner.
â– Keep flammable materials and vapors, such as gasoline, away from
refrigerator.
â– Use two or more people to move and install refrigerator.
â– Disconnect power before installing ice maker (on ice maker kit ready
models only).
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.
2
PROPER DISPOSAL OF YOUR
OLD REFRIGERATOR
IMPORTANT: Child entrapment and suffocation are not problems of the
past. Junked or abandoned refrigerators are still dangerous – even if
they will sit for “just a few days.” If you are getting rid of your old
refrigerator, please follow these instructions to help prevent accidents.
Before You Throw Away Your Old Refrigerator or Freezer:
â– Take off the doors.
â– Leave the shelves in place so that children may not easily climb
inside.
Using the Controls
Your refrigerator has two controls that affect the temperature. The
Temperature control is located at the top front of the refrigerator
compartment and the Airflow control is located on the back wall of the
freezer compartment.
Temperature Control
The Temperature control regulates the coldness of the air flowing into
the compartments.
For your convenience, your refrigerator controls are preset at the
factory. When you first install your refrigerator, make sure that the
controls are still preset to the mid-setting as shown.
NOTE: To turn off your refrigerator, turn the refrigerator control to the
word OFF. Turning the Temperature Control to OFF stops cooling in the
refrigerator and freezer compartments, but it does not disconnect the
refrigerator from the power supply.
Mid-setting “3”
IMPORTANT:
â– Give your refrigerator time to cool down completely before adding
food. It is best to wait 24 hours before you put food into the
refrigerator.
NOTE: Adjusting the Temperature Control to a higher (colder)
setting will not cool the compartments any faster.
â– If you add food before the refrigerator has cooled completely, your
food may spoil.
Adjust the Temperature Control
The mid-settings should be correct for normal household usage. The
controls are set correctly when milk or juice is as cold as you like and
when ice cream is firm.
If the temperature is too warm or too cold in the refrigerator or freezer,
first check the air vents to be sure they are not blocked.
If you need to adjust temperatures, use the settings listed in the chart
below as a guide. On models with two controls, adjust the refrigerator
temperature first. Wait at least 24 hours between adjustments and then
recheck the temperatures.
WARNING
Suffocation Hazard
Remove doors from your old refrigerator.
Failure to do so can result in death or brain damage.
Important information to know about disposal of
refrigerants:
Dispose of refrigerator in accordance with Federal and Local
regulations. Refrigerants must be evacuated by a licensed,
EPA certified refrigerant technician in accordance with
established procedures.
OPERATING YOUR REFRIGERATOR
CONDITION/REASON: ADJUSTMENT:
REFRIGERATOR section too warm
â– Door opened often, large amount of
food added or room temperature
very warm
Adjust REFRIGERATOR
Control one setting
higher
FREEZER section too warm/ice not
made fast enough
â– Door opened often, or large amount
of food added or very cold room
temperature (can’t cycle often
enough)
â– Heavy ice usage
Adjust AIRFLOW or
REFRIGERATOR
Control one setting
higher
REFRIGERATOR section too cold
â– Controls not set correctly for your
conditions
Adjust REFRIGERATOR
Control one setting lower
FREEZER section too cold
â– Controls not set correctly for your
conditions
Adjust AIRFLOW or
REFRIGERATOR
Control one setting lower
3
Airflow Control
The Airflow control regulates the amount of air flowing between the
freezer and the refrigerator compartments.
When you plug in the refrigerator for the first time, turn the Airflow
control to the Recommended setting.
Adjust the Airflow Control
If you want to temporarily increase the cold air flow to a specific
compartment, adjust the control.
â– Max - Increase airflow to the freezer
â– Min - Increase airflow to the refrigerator
IMPORTANT: Once the performance is achieved, return the Airflow
control to the Recommended setting to keep the refrigerator operating
at optimum efficiency.
Ice Maker (on some models)
Turning the Ice Maker On/Off
NOTE: Do not force the wire shutoff arm up or down.
â– To turn on the ice maker, simply lower the wire shutoff arm.
NOTE: Your ice maker has an automatic shutoff. As ice is made,
the ice cubes will fill the ice storage bin and the ice cubes will raise
the wire shutoff arm to the OFF (arm up) position.
â– To manually turn off the ice maker, lift the wire shutoff arm to the
OFF (arm up) position and listen for the click to make sure the ice
maker will not continue to operate.
NOTE: Turn off the ice maker before removing the ice storage bin to
serve ice or to clean the bin. This will keep the ice cubes from dropping
out of the ice maker and into the freezer compartment. After replacing
the ice storage bin, turn on the ice maker.
Ice Production Rate
â– NORMAL Ice Production: The ice maker should produce
approximately 8 to 12 batches of ice in a 24-hour period. If ice is not
being made fast enough, turn the Freezer control toward a higher
(colder) number in half number steps. (For example, if the control is
at 3, move it to between 3 and 4.) Wait 24 hours and, if necessary,
gradually turn the Freezer control to the highest setting, waiting
24 hours between each increase.
â– MAXIMUM Ice Production (on some models): The ice maker should
produce approximately 16 to 20 batches of ice in a 24-hour period.
If your refrigerator has the maximum ice production feature, push
the switch to MAX.
Remember
â– Allow 24 hours to produce the first batch of ice. Allow 3 days to
completely fill the ice storage bin. Discard the first three batches of
ice produced.
â– The quality of your ice will be only as good as the quality of the
water supplied to your ice maker. Avoid connecting the ice maker to
a softened water supply. Water softener chemicals (such as salt)
can damage parts of the ice maker and lead to poor quality ice. If a
softened water supply cannot be avoided, make sure the water
softener is operating properly and is well maintained.
â– Do not store anything on top of the ice maker or in the ice storage
bin.
CONDITION/REASON: ADJUSTMENT:
Heavy ice use Max
Hot room temperature Max - To maintain ice making
production rate
Large quantity of groceries Min - To quickly chill food and
beverages
ICE AND WATER


Product specificaties

Merk: Whirlpool
Categorie: Koelkast
Model: WRT314TFDW

Heb je hulp nodig?

Als je hulp nodig hebt met Whirlpool WRT314TFDW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Koelkast Whirlpool

Handleiding Koelkast

Nieuwste handleidingen voor Koelkast