Whirlpool WRB322DMBW Handleiding

Whirlpool Koelkast WRB322DMBW

Lees hieronder de đź“– handleiding in het Nederlandse voor Whirlpool WRB322DMBW (26 pagina's) in de categorie Koelkast. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/26
W11625829A
W11625830A-SP
BOTTOM MOUNT OWNER'S MANUAL
MANUEL D’UTILISATION DU RÉFRIGÉRATEUR À
CONGÉLATEUR EN BAS
Table of Contents/Table des matières
REFRIGERATOR SAFETY.................................................2
Refrigerator Safety.........................................................2
MAINTENANCE AND CARE ..............................................3
Cleaning ......................................................................3
Changing the LED Module ...............................................4
Water Filtration System ...................................................4
Vacation and Moving Care ...............................................5
INSTALLATION INSTRUCTIONS ........................................6
Unpack the Refrigerator ..................................................6
Electrical Requirements ..................................................6
Location Requirements ...................................................6
Water Supply Requirements.............................................7
Connect the Water Supply ...............................................7
REFRIGERATOR FEATURES.............................................8
Crisper Humidity Control .................................................8
Ice Maker and Storage Bin (on some models) ...................... 9
DOOR AND HANDLE INSTRUCTIONS ................................9
Refrigerator Doors and Drawer .........................................9
Remove and Replace Door Handles .................................. 9
Remove Doors and Hinges ............................................ 10
Reverse Doors (optional)............................................... 12
Replace Doors and Hinges ............................................ 13
Remove and Replace Freezer Drawer .............................. 14
PERFORMANCE DATA SHEET ........................................ 16
Performance Data Sheet ............................................... 16
SÉCURITÉ DU RÉFRIGÉRATEUR .................................... 21
Sécurité du réfrigérateur................................................ 21
ENTRETIEN ET RÉPARATION ......................................... 22
Nettoyage .................................................................. 22
Remplacer le module Ă  DEL........................................... 23
Système de filtration de l’eau .......................................... 23
Précautions à prendre avant les vacances ou le
déménagement ........................................................... 24
INSTRUCTIONS D’INSTALLATION ................................... 25
Déballage du réfrigérateur ............................................. 25
Spécifications électriques .............................................. 25
Exigences d’emplacement ............................................. 26
Spécifications de l’alimentation en eau ............................. 26
Raccordement à la canalisation d’eau .............................. 27
CARACTÉRISTIQUES DU RÉFRIGÉRATEUR..................... 28
Réglage de l’humidité dans le tiroir à légumes .................... 28
Machine à glaçons et bac d’entreposage à glaçons (sur
certains modèles) ........................................................ 28
INSTRUCTIONS POUR LA PORTE ET LA POIGNÉE............ 29
Portes et tiroir du réfrigérateur ........................................ 29
Consulter la section Retrait et réinstallation des poignées de
porte ......................................................................... 29
Démontage des portes et charnières ................................ 30
Inversion des portes (facultatif) ....................................... 32
Réinstallation des portes et charnières ............................. 33
Retrait et réinstallation du tiroir de congélation ................... 34
FICHE DE DONNÉES DE PERFORMANCE ........................ 36
Fiche de données de performance................................... 36
6
INSTALLATION INSTRUCTIONS
Unpack the Refrigerator
WARNING
Excessive Weight Hazard
Use two or more people to move and install or uninstall
appliance.
Failure to do so can result in back or other injury.
Remove the Packaging
�Remove tape and glue residue from surfaces before turning on
the refrigerator. Rub a small amount of liquid dish soap over
the adhesive with your fingers. Wipe with warm water and dry.
�Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For
more information, see “Refrigerator Safety.”
�Dispose of/recycle all packaging materials.
When Moving Your Refrigerator:
Your refrigerator is heavy. When moving the refrigerator for
cleaning or service, be sure to cover the floor with cardboard or
hardboard to avoid floor damage. Always pull the refrigerator
straight out when moving it. Do not wiggle or “walk” the
refrigerator when trying to move it, as floor damage could occur.
Clean Before Using
After you remove all of the packaging materials, clean the inside
of your refrigerator before using it. See the cleaning instructions in
the “Maintenance and Care” section of your Owner’s Manual.
Important information to know about glass shelves and
covers:
Do not clean glass shelves or covers with warm water when they
are cold. Shelves and covers may break if exposed to sudden
temperature changes or impact, such as bumping. Tempered
glass is designed to shatter into many small, pebble-size pieces.
This is normal. Glass shelves and covers are heavy. Use both
hands when removing them to avoid dropping.
Electrical Requirements
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical connection.
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person.
Do not use a cord that shows cracks or abrasion damage along its
length or at either the plug or connector end.
Recommended Grounding Method
A 115 V, 60 Hz, AC-only 15 A or 20 A fused, grounded electrical
supply is required. It is recommended that a separate circuit
serving only your refrigerator and approved accessories be
provided. Use an outlet that cannot be turned off by a switch. Do
not use an extension cord.
NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, turn the refrigerator to OFF. Depending on
your model, turn the refrigerator control to the word OFF, or press
the refrigerator down arrow touch pad until a dash (–) appears in
refrigerator displays as shown. Disconnect the refrigerator from
the electrical source. When you are finished, reconnect the
refrigerator to the electrical source and reset the temperature
controls to the desired setting. See “Quick Start Guide.”
Location Requirements
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as gasoline,
away from appliance.
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
IMPORTANT: This refrigerator is designed for indoor, household
use only.
This appliance is intended to be used in a household and similar
applications such as:
�Staff kitchen areas in shops, offices and other working
environments.
�Farm houses and by clients in hotels, motels and other
residential type environments.
�Bed and breakfast type environments.
�Catering and similar non-retail applications.
To ensure proper ventilation for your refrigerator, allow for 1/2"
(1.25 cm) of space on each side and at the top. Allow for 1"
(2.54 cm) of space behind the refrigerator. If your refrigerator has
an ice maker, allow extra space at the back for the water line
connections. When installing your refrigerator next to a fixed wall,
leave 2 1/2 " (6.3 cm) minimum on the hinge side (some models
require more) to allow for the door to swing open.
7
NOTE: This refrigerator is intended for use in a location where the
temperature ranges from a minimum of 55°F (13°C) to a
maximum of 110°F (43°C). The preferred room temperature range
for optimum performance, which reduces electricity usage and
provides superior cooling, is between 60°F (15°C) and 90°F
(32°C). It is recommended that you do not install the refrigerator
near a heat source, such as an oven or radiator.
Water Supply Requirements
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed:
�Flat-blade screwdriver
�7/16" and 1/2" Open-end or two
adjustable wrenches
�1/4" Nut driver
�1/4" Drill bit
�Cordless drill
IMPORTANT:
�Connect to a potable water supply only.
Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after
the system. Systems certified for cyst reduction may be used
on disinfected waters that may contain filterable cysts.
�All installations must meet local plumbing code requirements.
�Do not use a piercing-type or 3/16 " (4.76 mm) saddle valve
which reduces water flow and clogs more easily.
�Use copper tubing and check for leaks. Install copper tubing
only in areas where the household temperatures will remain
above freezing.
�For models with water filters, the disposable water filter should
be replaced at least every 6 months.
Water Pressure
A cold water supply with water pressure of between 35 psi and
120 psi (241 kPa and 827 kPa) is required to operate the water
dispenser and ice maker. If you have questions about your water
pressure, call a licensed, qualified plumber.
Reverse Osmosis Water Supply
IMPORTANT: The pressure of the water supply coming out of a
reverse osmosis system going to the water inlet valve of the
refrigerator needs to be between 35 psi and 120 psi (241 kPa and
827 kPa).
If a reverse osmosis water filtration system is connected to your
cold water supply, the water pressure to the reverse osmosis
system needs to be a minimum of 40 psi to 60 psi (276 kPa to
414 kPa).
If the water pressure to the reverse osmosis system is less than
40 psi to 60 psi (276 kPa to 414 kPa):
IMPORTANT: Flush the water system before calibrating
Measured Fill. See “Flush the Water System” in the Owner’s
Manual.
If you have questions about your water pressure, call a licensed,
qualified plumber.
Connect the Water Supply
Read all directions before you begin.
IMPORTANT:
�Plumbing shall be installed in accordance with the
International Plumbing Code and any local codes and
ordinances.
�The water tubing on the back of the refrigerator (which is used
to connect to the household water line) is a PEX (cross-linked
polyethylene) tube. Copper and PEX tubing connections from
the household water line to the refrigerator are acceptable, and
will help avoid off-taste or odor in your ice or water. Check for
leaks. If PEX tubing is used instead of copper, we recommend
contacting Service to obtain current part numbers.
�Install tubing only in areas where temperatures will remain
above freezing.
�If you turn on the refrigerator before the water line is
connected, turn off the ice maker to avoid excessive noise or
damage to the water valve.
Connect to Water Line
1. Unplug refrigerator or disconnect power.
2. Turn off main water supply. Turn on nearest faucet long
enough to clear line of water.
3. Find a 1/2" to 1 1/4 " (12.7 mm to 31.8 mm) vertical cold water
pipe near the refrigerator.
4. Determine the length of copper tubing you need. Measure
from the connection on the lower right rear of the refrigerator
to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use
1/4" (6.35 mm) O.D. (outside diameter) copper or PEX tubing.
Be sure both ends of copper or PEX tubing are cut square.
5. Using a cordless drill, drill a 1/4" (6.35 mm) hole in the cold
water pipe you have selected.
A. Cold water pipe
B. Pipe clamp
C. Copper or PEX
tubing
D. Compression nut
E. Compression sleeve
F. Shutoff valve
G. Packing nut
6. Fasten the shutoff valve to the cold water pipe with the pipe
clamp. Be sure the outlet end is solidly in the 1/4" (6.35 mm)
drilled hole in the water pipe and that the washer is under the
pipe clamp. Tighten the packing nut. Tighten the pipe clamp
screws slowly and evenly so the washer makes a watertight
seal. Do not overtighten.
7. Slip the compression sleeve and compression nut on the
copper tubing as shown. Insert the end of the tubing into the
outlet end squarely as far as it will go. Screw compression nut
onto outlet end with adjustable wrench. Do not overtighten or
you may crush the copper tubing.


Product specificaties

Merk: Whirlpool
Categorie: Koelkast
Model: WRB322DMBW

Heb je hulp nodig?

Als je hulp nodig hebt met Whirlpool WRB322DMBW stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Koelkast Whirlpool

Handleiding Koelkast

Nieuwste handleidingen voor Koelkast