Whirlpool WED8120HC Handleiding

Whirlpool Wasdroger WED8120HC

Lees hieronder de 📖 handleiding in het Nederlandse voor Whirlpool WED8120HC (24 pagina's) in de categorie Wasdroger. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/24
QUICK REFERENCE GUIDE
WHIRLPOOLÂŽ ELECTRIC/GAS DRYER
WARNING:
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly could result in serious injury, death, or property
damage.
Do not store or use gasoline or other ammable vapors and liquids in the vicinity of this
or any other appliance.
–
–WHAT TO DO IF YOU SMELL GAS:
•
Do not try to light any appliance.
•
Do not touch any electrical switch; do not use any phone in your building.
•
Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s
instructions.
•
If you cannot reach your gas supplier, call the re department.
–Installation and service must be performed by a qualied installer, service agency, or
the gas supplier.
•
Clear the room, building, or area of all occupants.
W11175247B
2
5 56 4
1 32
CONTROL PANEL AND FEATURES
POWER
Touch to turn on/off or to stop/cancel a cycle.
WHAT TO DRY/HOW TO DRY
First select a cycle from the “What to Dry” and then select the
“How to Dry” to get the best combination cycle available for the
type of items you are going to dry. See “Cycle Guide” for cycle
details.
START/PAUSE
Touch and hold; cycle will start after countdown.
Touch START/PAUSE during a cycle to pause it. Touch again to
resume.
1
2
3
MODIFIERS (Not all cycles and options are available on all
models.)
NOTE: Dryer remembers the last completed cycle and cycle
settings. The next time you turn dryer on, it will be set to run the
last cycle.
Temp
Touch to modify the cycle’s available temperatures (Air Only,
Low, Medium, Medium High, High). Follow garment label
instructions for best results. Once a cycle has started, the
temperature can be changed within the rst 5-8 minutes.
Dryness
Touch to modify the cycle’s available dryness levels on the
sensor cycles (Less, Normal, More).
NOTE: Dryness is for use with Automatic Cycles only.
Wrinkle Shield™ Option
Touch to turn on/off and on with steam (select models). Wrinkle
Shield™ option adds up to 150 minutes of periodic tumbling and
heat to help reduce wrinkling. Wrinkle Shield™ option with steam
will add a short steam cycle after 60 minutes to help smooth
wrinkles.
CYCLE OPTIONS (Not all cycles and options are available on
all models.)
Use to select available modifiers for your dryer.
Remote Enable
Touch each time you want to remotely control via the WhirlpoolÂŽ
app. Follow the instructions in the “GET THE WHIRLPOOL®
APP AND GET CONNECTED” section below for more details.
NOTE: Once Remote Enable has been selected, certain
interactions with the dryer will cause it to cancel Remote Enable.
Example: Opening the door.
4
5
Damp Dry Signal
Touch DAMP DRY SIGNAL or touch and hold DRUM LIGHT
(depending on the model) for at least 3 seconds to turn the
Damp Dry Signal on or off. You will get a sound and display
notification as “Items are damp. You can pause and reposition
for best results”.
Drum Light
Touch to turn the drum light on/off.
Steam Options
Touch to add Steam and/or Reduce Static to selected cycle.
Steam option adds steam to the end of cycle to help smooth
wrinkle. Reduce Static will automatically tumble, pause and
introduce a small amount of moisture to the load to help reduce
static.
Steam Refresh (steam models only)
This cycle is best for reducing wrinkles from dry items. Cycle
time will increase, depending on number of items. This is an
independent cycle that cannot be combined with any other
cycle.
More Time/Less Time Timed Dry Adjust
Touch MORE TIME or LESS TIME with the Timed Dry/Quick
Dry cycle to increase or decrease the length of the cycle time.
EcoBoostTM Option
The EcoBoostTM option will default on only for the Regular/
Normal cycle and is only available on that cycle. This option
allows you to increase your energy savings by using a slightly
lower heat level. The EcoBoostTM option will increase drying
times by approximately 40 minutes, which will be reflected on
the LCD Display. If optimal time is desired, touch EcoBoost to
turn off this option.
Cycle Signal
Use this option to turn the signal indicating the end of a drying
cycle to Low, Medium, High, or Off.
NOTE: Press/hold Cycle Signal to select the volume.
Appearance may vary depending on model.
3
More Options
Touch to select your “Favorite cycle” (Only available for models
with WiFi capability).
Favorite cycle: You may create “custom” cycles in the app and
store one frequently-used or favorite cycle on the machine.
LCD DISPLAY
When you select a cycle, its default settings will display and
the Estimated Time Remaining (for Automatic Cycles) will vary
depending on “What to Dry” and “How to Dry” selections, or
actual time remaining for Timed Dry cycles (for Manual Cycles)
will be displayed.
CYCLE PHASE LABELS
Sensing
Displays during Sensor cycles to indicate that the moisture
sensor on the dryer is operating. It will not be displayed during
Timed/Quick Dry cycles or options such as Wrinkle Shield™
option.
Drying
Dryer is in the main dry phase of the automatic cycle.
Steaming
Steam option selected and Steam phase running.
Cool Down
The dryer has nished drying with heat and is now tumbling the
load without heat to cool it down.
Static Reduce
Reduce Static phase is running.
End
Display message will show “Drying is complete” and will time-
out after 5 minutes. This will indicate that the selected cycle has
ended and the load may be removed from the dryer. If Wrinkle
Shield™ option has been selected, the dryer may continue to
tumble the load, even if “End” is displayed.
Check Vent
The Check Vent alert is a feature available for Automatic cycles
only. This alert will show the status of airflow through the dryer
and the dryer vent system for the dryer’s life. During the sensing
phase at the beginning of the cycle if it detects a blocked vent or
low pressure it will display “Check vent. Clean lint screen or vent
for better performance.”
REMEMBER: Thedryer will continue to operate even when
check vent notification is displayed, but poor airflow can impact
dry times and overall performance.
Display message can be cleared by pressing any key with the
exception of Power which will cancel the cycle.
GET THE WHIRLPOOLÂŽ APP AND GET CONNECTED
With your mobile device download the WhirlpoolÂŽ
app. You can get subscription and connectivity
instructions, terms of use, and privacy policy at www.whirlpool.com/connect or in
Canada www.whirlpool.ca/connect.
Once installed, launch the app and you will be guided through the steps to subscribe and create your user account to connect to your
appliance. If you have any problems or questions, call Whirlpool ÂŽ Connected Appliances at . 1-866-333-4591
(Only available for models with WiFi capability).
CONNECTING UNIT
TO INTERNET
1
To connect your unit to the internet
please download the WhirlpoolÂŽ app
and press .REMOTE ENABLE
ALLOWING REMOTE
CONTROL AND
INTERACTION
2
You must press REMOTE ENABLE
when connected in order to allow
remote control and interaction.
6
When unit is rst powered on, it will prompt to select language before you see message to Download APP or press any other key to setup
WiFi later.

Product specificaties

Merk: Whirlpool
Categorie: Wasdroger
Model: WED8120HC

Heb je hulp nodig?

Als je hulp nodig hebt met Whirlpool WED8120HC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Wasdroger Whirlpool

Whirlpool

Whirlpool FFT M11 82WS FR Handleiding

3 December 2024
Whirlpool

Whirlpool FFT M11 72B EE Handleiding

3 December 2024
Whirlpool

Whirlpool W7D93WRFR Handleiding

3 December 2024
Whirlpool

Whirlpool FFT M11 9X3WSY Handleiding

3 December 2024
Whirlpool

Whirlpool FFT M22 8X2B Handleiding

3 December 2024
Whirlpool

Whirlpool W6 D84WB EE Handleiding

3 December 2024
Whirlpool

Whirlpool FFT D 9X3SBS PL Handleiding

3 December 2024
Whirlpool

Whirlpool MFTD9X3WC Handleiding

3 December 2024
Whirlpool

Whirlpool W7 D94WR PL Handleiding

3 December 2024
Whirlpool

Whirlpool FFT M22 9X2BS PL Handleiding

3 December 2024

Handleiding Wasdroger

Nieuwste handleidingen voor Wasdroger

Kuppersbusch

Kuppersbusch T6810.0W Handleiding

2 December 2024
Gorenje

Gorenje WNHEI72SAS Handleiding

2 December 2024
Gorenje

Gorenje DNP72GN Handleiding

2 December 2024
Gorenje

Gorenje WNHPI72SCS Handleiding

2 December 2024
Gorenje

Gorenje WNEI84SDS Handleiding

2 December 2024
Gorenje

Gorenje WA844 Handleiding

2 December 2024
Hotpoint

Hotpoint EU NTDG92 SK IT Handleiding

2 December 2024
Hotpoint

Hotpoint NT M11 92WK IT Handleiding

2 December 2024
Hotpoint

Hotpoint NT M11 8X3SKY IT Handleiding

2 December 2024
Hotpoint

Hotpoint NTS M11 9X3E IT Handleiding

2 December 2024