Whirlpool WCG51US6DS Handleiding

Whirlpool Fornuis WCG51US6DS

Lees hieronder de đź“– handleiding in het Nederlandse voor Whirlpool WCG51US6DS (16 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
W10648064A
1
THANK YOU for purchasing this high-quality product. Register your cooktop at www.whirlpool.com. In Canada, register your cooktop
at www.whirlpool.ca
For future reference, please make a note of your product model and serial numbers. These numbers can be found on the label located
on the bottom of the cooktop.
Model Number.......................................................................
Serial Number........................................................................
User Guide
Gas Cooktop
You can be killed or seriously injured if you don’t immediately follow instructions.
You can be killed or seriously injured if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the
instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
DANGER
WARNING
WARNING: If the information in this manual is not followed exactly, a fire or explosion
may result causing property damage, personal injury or death.
–Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance.
–WHAT TO DO IF YOU SMELL GAS:
•Do not try to light any appliance.
•Do not touch any electrical switch.
•Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
instructions.
•If you cannot reach your gas supplier, call the fire department.
–Installation and service must be performed by a qualified installer, service agency or the
gas supplier.
•Do not use any phone in your building.
WARNING: Gas leaks cannot always be detected by smell.
Gas suppliers recommend that you use a gas detector approved by UL or CSA.
For more information, contact your gas supplier.
If a gas leak is detected, follow the “What to do if you smell gas” instructions.
2
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock, injury to
persons, or damage when using the cooktop, follow basic
precautions, including the following:
â–  WARNING: NEVER use this appliance as a space heater to
heat or warm the room. Doing so may result in carbon monoxide
poisoning and overheating of the cooktop.
â–  CAUTION: Do not store items of interest to children in
cabinets above the cooktop – children climbing on the cooktop
to reach items could be seriously injured.
■ Proper Installation – The cooktop, when installed, must be
electrically grounded in accordance with local codes or, in the
absence of local codes, with the
National Electrical Code,
ANSI/NFPA70 or the Canadian Electrical Code, Part 1
. Be sure
the cooktop is properly installed and grounded by a qualified
technician.
â–  This cooktop is equipped with a three-prong grounding plug for
your protection against shock hazard and should be plugged
directly into a properly grounded receptacle. Do not cut or
remove the grounding prong from this plug.
â–  Disconnect the electrical supply before servicing the cooktop.
â–  Injuries may result from the misuse of the cooktop such as
stepping, leaning, or sitting on the top surface.
■ Maintenance – Keep cooktop area clear and free from
combustible materials, gasoline, and other flammable vapors
and liquids.
■ Storage on the cooktop – Flammable materials should not be
stored on or near surface units.
â–  Top burner flame size should be adjusted so it does not extend
beyond the edge of the cooking utensil.
KEY USAGE TIPS
LP Gas Conversion
IMPORTANT: This cooktop is factory set for use with Natural gas. If
you wish to use Liquid Propane (LP), call a licensed professional to
install the LP gas conversion kit (included).
Placement of Burner Heads and Caps
All burner caps and burner bases should be properly installed BEFORE
operating the cooktop. Check that each burner has the right size head
and cap.
Refer to the “Assembling Your Cooktop” section for proper burner head
placement details.
Lighting the Burners
IMPORTANT: All burners will click/spark when a knob is pushed in. A
burner will light only if the knob is pushed in then turned
counterclockwise to IGNITE.
To light the burners:
1. Push in the knob.
2. Turn the knob counterclockwise to IGNITE. Wait until you see a
flame.
3. Turn the knob anywhere between Hi and Lo to the desired setting.
Power failure: In case of a power failure, burners can be lit manually.
Hold a lit match near the burner and turn the knob counterclockwise to
IGNITE.
Cleaning the Burner: Tips
The burners should be kept clean. Spillovers should be cleaned
immediately since they can clog the openings in the burners.
IMPORTANT: Before cleaning, make sure all controls are off and the
cooktop is cool. For more information, see the “Care and Cleaning”
section.
â– Remove the burner cap from the base. Clean the burner cap with
hot soapy water and then rinse it.
â– Remove the burner base and clean the
gas tube opening under the base.
â– Clean clogged burner ports with a
straight pin, needle or small-gauge wire
as shown. Do not use a wooden
toothpick or clean in the dishwasher.
â– Gently clean the igniter with a damp
cloth.
3
Assembling the Burners
Check your model number. Then refer to the following for information specific to your burners.
Burner Head Placement
â– Burner caps and heads are included with your cooktop.
â– Always match the burner head size to the cap size.
â– Always line up the hole in the burner head to the electrode.
â– The cooktop comes with an extra Melt cap on WCG9 series
models. This is a large cap with “MELT” and “FOR SMALLEST
BURNER” printed on it. Use this cap over the smallest burner only.
■Standard, SpeedHeat™ and FlexHeat™ burners are similar in
assembly. Note that there is no hole in the FlexHeat™ dual flame
burner head to insert the electrode. The FlexHeat™ burner
electrode (C) aligns with the semicircle notch in the head (B).
Grate Placement
To install the grates, align the feet on the center grate with the indents
on the cooktop. Then install the 2 outer grates by aligning the tabs on
the center grate with the slots in the outer grates. Be sure to line up the
slots and tabs for proper grate alignment.
ASSEMBLING YOUR COOKTOP
B
C
D
A
BC
D
E
A
B C
D
E
A
WCG51US0D and WCG75US0D
A. SpeedHeat™ burner
B. Standard burner
C. Standard burner
D. Accusimmer® burner
WCG51US6D
A. Standard burner
B. SpeedHeat™ burner
C. Accusimmer® burner
D. Standard burner
E. Standard burner
WCG9
A. Standard burner
B. FlexHeat™ burner
C. Accusimmer® Plus burner
D. Standard burner
E. Standard burner
Standard and
SpeedHeat™ Burners
A. Cap
B. Head
C. Electrode
FlexHeat™ Burner
A. Cap
B. Head
C. Electrode
A
B
C
A
B
C
A. Outer grate slot
B. Center grate tab
AB


Product specificaties

Merk: Whirlpool
Categorie: Fornuis
Model: WCG51US6DS

Heb je hulp nodig?

Als je hulp nodig hebt met Whirlpool WCG51US6DS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fornuis Whirlpool

Handleiding Fornuis

Nieuwste handleidingen voor Fornuis