Whirlpool FWDD 1071682 WSV EU N Handleiding

Whirlpool Wasmachine FWDD 1071682 WSV EU N

Lees hieronder de 📖 handleiding in het Nederlandse voor Whirlpool FWDD 1071682 WSV EU N (20 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 70 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

DAILY REFERENCE GUIDE

Please read the content of the Health &

Safety and Installation Guides thoroughly

before you use this appliance.

The transit bolts must be removed

before the appliance is used.

See the Health & Safety and Installation

Guides for detailed instructions on how to

remove the transit bolts

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

For even more complete user support, register your

appliance at www.whirlpool.eu/register

PRODUCT DESCRIPTION

CONTROL PANEL

1. Top

2. Detergent dispenser

3. Control Panel

4. Lid handle

5. Door

6. Water lter - behind kick

panel

7. Removable kick panel

8. Adjustable feet (2)

APPLIANCE 1.

1. 2. 3. 12. 11.

9.8.

4. 10.

13.

7.5.

1. On/O button

2. Programme selector

3. Key Lock button

4. Drying settings button

5. Dry Only Button

6. Temperature button

7. Spin button

8. Delay timer button

9. Rapid button

10. Intensive Rinse button

11. FreshCare+ button

12. Display

13. Start/Pause button

DETERGENT DISPENSER

See the section DAILY USE for instructions on selecting and

starting a programme.

The rst time the machine is switched on, you will be asked to

select the language and the display will automatically show the

language selection menu.

To select the desired language press the and

buttons;

to conrm the selection press the button.

To change the language switch o the machine and press

buttons , , simultaneously until an alarm is heard:

the language-selection menu will be displayed again.

To change the display luminosity, which by default is set to

the medium value, switch the machine o then

simultaneously press buttons , and until the

buzzer sounds. Press buttons and

to choose the

desired level of luminosity then conrm by pressing button

FIRST TIME USE

Prewash Compartment

• Detergent for prewash

Main Wash Compartment

• Detergent for the main wash

• Stain remover

• Water softener

Softener compartment

• Softener

• Liquid starch

Pour softener or starch solution into the

compartment without exceeding the “max” level.

Release button

(press to remove tray for cleaning).

Preferably use the partition when A

washing with a liquid detergent for

washing, to ensure that the correct

quantity of detergent is used (the

partition is included in the bag

containing the instructions).

Move the partition into slot when B

using detergent powder.

F irst cycle operation

Remove any manufacturing debris:

1. Select the programme with a temperature setting of 60 °C.

2. Pour a small quantity of detergent powder into the main

wash compartment of the detergent dispenser

(maximum 1/3 of the quantity the detergent

manufacturer recommends for lightly soiled laundry).

3. Start the programme without loading the WASHER

DRYER machine (with empty drum).

DAILY USE

1. LOADING LAUNDRY.

• Prepare the laundry, following the

recommendations given in the section “HINTS AND

TIPS”. - Open the door and load the laundry into the

drum, without exceeding the maximum load capacities

indicated in the Programme Chart.

• Close the door, pressing until the latch

audibly locks, and check that there is no

laundry trapped between the door glass

and the rubber seal.

2. OPEN THE WATER TAP

Check that the WASHER DRYER is connected

correctly to the water mains. Open the water tap.

3. SWITCHING ON THE WASHER DRYER MACHINE.

Press button ; the lamp ashes slowly.

4. SELECTING A PROGRAMME AND CUSTOMISING A CYCLE.

The following functions are possible with this appliance:

• Wash only

• Wash and dry

• Dry only

Wash only

Select the required programme with the PROGRAMME

selector dial. The display will show the name and duration of

the cycle. The WASHER DRYER machine automatically

displays the maximum temperature and spin speed settings

possible for the selected programme. Adjust the temperature

and/or spin speed settings if needed with the relative

buttons.

• Press button to cycle through progressively lower

temperature settings until cold wash is set (“- -“) shown on

display.

• Press button to cycle through progressively lower spin

speed settings until the spin cycle is turned o (“- -“ shown

on display).

Pressing the button again sets the highest possible setting.

Select the required options (if necessary).

• Press the button to select the option; the respective button

lamp illuminates.

• Press the button again to cancel the option; the lamp

extinguishes.

! If the selected option is not compatible with the

programme set, an error warning tone sounds and the

wording “No Selection” is shown on the display. The option is

not selected.

Wash and dry

To wash and dry a load with no interruption between the

wash and dry cycles, make sure that the load does not

exceed the maximum permissible drying load for the

selected programme (see the column “Max. load for drying

cycle” in the

Programme chart

1. Follow the instructions given in the paragraph “Wash Only”

to select and, if necessary, customise the required

programme.

2. to select the required drying mode. Two drying Press

modes are available: automatic or timer.

- Automatic drying with selectable levels:

In automatic drying mode, the WASHER DRYER machine

dries the laundry until the set level of dryness is reached.

Pressing button once automatically selects the highest

drying level available for the selected programme. Press the

button again to reduce the drying level.

The following levels are available:

Cupboard extra dry : suitable for garments which need

to be dried completely, such as sponges and bathrobes.

Cupboard dry : laundry is completely dry and ready to be

put away in the wardrobe without ironing.

Hanger dry : laundry is left slightly damp to minimise

creasing. Garments must be hung to air dry completely.

Iron dry : garments are left reasonably damp to make

ironing easier.

- Timer drying mode:

Press button repeatedly to set timer drying mode. After

cycling through all the automatic drying levels, continue

pressing button until the desired time is displayed.

Values from 180 to 30 minutes are settable.

To wash a load of laundry larger than the maximum

permissible load for drying see the column “( Max. load for

drying cycle” in the Programme chart), remove a few garments

once the washing cycle has nished before starting the

drying cycle. Proceed as follows:

1. Follow the instructions given in the paragraph “Wash Only” to

select and, if necessary, customise the required programme.

2. Do not include a drying cycle.

3. Once the washing cycle is nished, open the door and

remove a few garments to reduce the load. Now follow the

instructions for “Dry only”.

N.B.: always allow a cooling down period after drying before

opening the door.

When using the two preset cycles and , it is

not necessary to select and start a drying cycle.

Dry only

This function is used to simply dry a wet load washed

previously in the WASHER DRYER or by hand.

1. Select a suitable programme for the laundry you want to dry

(e.g. select cotton to dry wet cotton laundry).

2. Press button to dry without a wash cycle.

3. Press to select the required drying mode. Two drying modes

are available: automatic drying by levels or drying by time.