Whirlpool FT M10 81Y EU Handleiding

Whirlpool Wasdroger FT M10 81Y EU

Lees hieronder de 📖 handleiding in het Nederlandse voor Whirlpool FT M10 81Y EU (4 pagina's) in de categorie Wasdroger. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your product on

www.whirlpool.eu/register

Quick guide

Before using the appliance carefully read the Safety Instructions.Before using the appliance carefully read the Safety Instructions.

PROGRAMS

Eco cotton kg Max* Time 215'

Standard cotton programme, suitable to dry normally wet cotton

laundry. Most ecient programme in terms of energy consumption

for drying cotton laundry. The values on the Energy Label are based on

this programme.

Mixed kg 4 Time 184'

This programme is ideal for drying cotton and synthetic fabrics

together.

Bed linen kg Max* Time 240'

This programme is intended for drying cotton sheets.

Shirts kg 3 Time 137'

This is a programme for Shirts made from cotton or cotton

blend/synthetics.

Sport kg 4 Time 75'

For drying sports garments made of synthetics or cotton.

Duvet Time 179'

Programme intended to dry bulky garments, as single duvet.

Jeans kg 3 Time 135'

For drying cotton jeans-wear and garments made of robust

cotton, like denim, such as trousers and jackets.

Easy ironing

This cycle allows to extend the bres of garments thus making

ironing and folding easier. Do not use in case of garments that are

still wet. Suitable for small loads of cotton textiles or cotton blends.

Refresh

A short programme suitable for refreshing bres and garments by

means of fresh air. Do not use with garments that are still wet. It can be

used on with any load size but is more eective with small loads.

The cycle duration is about 20 minutes.

FIRST TIME USE

Make sure that the water tank is correctly inserted. Make sure

that the drain hose on the back of the dryer is xed correctly,

either to the dryer’s water tank, or to your domestic sewage

system.

The dryer should be installed in environment in a room

temperature range of 20°to 23°C for optimum performance. But

will function if the room is between 14 and 30°C. Before you use

your dryer ensure that it has been in a upright position for at

least 6 hours.

DAILY USE

Doing this will keep your machine working at its BEST!

Remember to empty your water tank after each drying cycle.

Remember to clean your lters after each drying cycle. (Refer

to section Care & Maintanence).

1. Open the door and load garments. Always refer to instructions

on clothing labels and the max loads indicated in the programme

section. Empty pockets. Make sure garments do not get caught

between the door and/or the door lter.

2. Close the door.

3. Press the button On/O.

4. Select the programme according to the laundry type.

Select the options, if necessary.

5. To start the cycle, press the Start/Pause button.

6. At the end of the drying cycle, a buzzer will beep. An indicator on

the control panel signals the end of the cycle. Pull the load out

immediately to prevent the formation of creases on laundry

7. Turn the machine o by pressing the button On/O, open the

door and pull clothing out. If the machine is not switched o

manually, after about a quarter of an hour from the cycle end, the

appliance turns o automatically to save energy.

If this last stage is not carried out immediately, some machines

and/or some programmes/options are equipped with Crease Care

system. For some hours, after the end of drying, the drum rotates

at regular intervals to prevent the formation of creases. In case of

power failure, it is necessary to press the button Start/Pause to

restart the cycle.

OPENING OF THE DOOR DURING THE CYCLE

During operation, it is possible to open the door. After having

closed it, press the button Start/Pause again to restart the dryer.

*MAX LOAD 8 Kg )(Dry load

CARE LABEL

Always check the care labels, especially when placing garments in

the tumble dryer for the  rst time. Below are the most commonly

used symbols:

May be tumble dried.

Do not tumble dry.

Tumble dry – high heat.

Tumble dry – low heat.

CONTROL PANEL

1 ON/OFF button (Reset if long pressed)

2 Programme selection knob

3 Start/Pause

Options buttons*

4 Dryness level

5 Timed drying

6 Start delay

7 Rapid

8 Fresh care+ (Key lock if long pressed)

9 Cycle end

*Note: some models may have the wording in full instead of the icons

INDICATORS

Dryness level: Iron dry - Hanger dry - Cupboard dry - Extra dry

Cycle phase: Drying - Cool down - End of cycle

Empty water tank - Clean door lter: primary, secondary Autoclean

Refer to troubleshooting section: Failure: Call after sales service

DEMO

Demo mode

4 5 6

3“

120’

180’

90’

60’

30’

OPTIONS BUTTONS

These buttons serves to personalise the selected programme

according to personal requirements. Not all options are available

for all programmes. Some options are incompatible with the

ones previously set. The buzzer and/or blinking indicators will

signal the incompatibility. If the option is available, the option

indicator will stay on. Some options may be kept in the memory

of the programme if selected in the previous drying.

Rapid 30' kg 0,5

Ideal for drying cotton garments spun at high speed in the

washing machine.

Coloured kg Max* Time 235'

Programme for gentle drying suitable for coloured garments.

Silk kg 0,5 Time 66'

Gentle drying of silk garments.

Wool kg 1 Time 84'

Programme for drying wool clothing. It is advisable to turn

the garments inside out before drying. Leave to dry naturally the

heaviest edges that are still damp.

Delicates kg 2 Time 60'

For drying delicate laundry which needs gentle treatment.

Synthetics kg 4 Time 75'

For drying laundry made of synthetic bres.

OPTIONS

After selecting the programme, the various options can be

set, if necessary.

Dryness level

Press the related button several times to obtain a dierent

level of residual moisture on garments. An indicator signals the

level being selected.

Iron dry: a very delicate ironing. Suitable for making ironing of

garments easier immediately after the end of the cycle.

Hanger dry: a level intended for delicate garments ready to

be hanged.

Cupboard dry: the garments are ready to be folded and put

away.

Extra dry: used for garments to be worn at the end of the

cycle.

Timed drying

This option allows to set the drying time. Press the

corresponding button to set the required time for drying. An

indicator on the control panel signals the time being selected.

Start delay

This option allows you to set the delay of the cycle start. Press

the corresponding button several times to obtain the required

delay. After having reached the max. settable time, the option is

reset by pressing the button again. An indicator on the control

panel signals the time being selected. After having pressed the

button Start/Pause, the machine signals the remaining time

for the cycle start. In case of door opening, after closing, it is

necessary to press the button Start/Pause.

Rapid

Enables quicker drying.

Fresh care+

If garments are left inside the drum after the end of the

cycle, they are subject to bacterial proliferation. This option allows

to prevent this proliferation by controlling the temperature and

the rotation of the drum. This treatment has a max. duration of 6

hours after the end of the programme set. This option remains in

memory if selected in the previous drying.

If this option is used together with the Start Delay, a crease

treatment (a periodic rotation of the drum) is added in the Start

Delay phase.

Key lock

This option makes all machine controls inaccesible, except the

button On/O. When the machine is on: to activate the option,

keep the button pressed until the indicator goes on. To disable the

option, keep the button pressed until the indicator goes o. This

option remains in memory if selected in the previous drying.

Cycle end

This option activates a prolonged buzzer at the end of the

cycle. Enable it if you are not sure to hear the normal sound at the

end of the cycle. This option remains in memory if selected in the

previous drying.

The duration of these programs will depend on the size of the

load, types of textiles, the spin speed used in your washer and

any extra options selected. In machines equipped with display,

the duration of the cycles is shown on the control panel. The

remaining time is constantly checked and adjusted during the

drying cycle to show the best possible estimate.

Quick guide

CARE AND MANTENANCE

Unplug the dryer during the cleaning and maintenance

procedures.

Emptying the water tank after each cycle (see Fig. A).

Pull the container out of the dryer and and empty it into a

sink or other suitable drain, then place it back. Do not use the dryer

without having inserted the container back in place.

Cleaning the primary door lter after each cycle (see Fig. B).

After each cycle, pull the primary door lter out and clean it by

removing the lint from the lter surface under running water or

using a vacuum cleaner.

Cleaning the secondary door filter when the relevant

indicator turns on (see Fig. C).

Pull the secondary door lter out and clean it in all its parts by

washing it under running water or using a vacuum cleaner.

For optimal performance, dry up all the lters before inserting

them back in place.

Do not use the dryer without having inserted all lters back

in place properly rst.

The lters are essential parts for drying. They are intended

to collect the lint formed during drying process. In case

of clogged lters, the air ow inside the dryer would be

seriously aected: the drying times would be longer, the

energy consumption would increase and the dryer could be

damaged. If these procedures are not carried out properly,

the dryer may not start.

Autoclean

The maintenance of the bottom lter of this model is

automatic. The dryer carries out cleaning when the sensors signal

the need to do so. In this case, the machine goes on working even

when the drying cycle is completed. An indicator on the control

panel will signal the maintenance. Do not switch the machine o

during this phase.

PRODUCT DESCRIPTION

1. Water Tank

2. Air Intake

3. Door lter

B primary

C secondary

TRANSPORT AND HANDLING

Never lift the dryer by holding it at the worktop.

1. Unplug the dryer.

2. Make sure that door and water tank are properly closed.

3. If the drain hose is connected to your sewage system, x the

drain hose on the rear of the dryer again (see Installation Guide).

Heat Pump System

The heat pump contains uorinated greenhouse gases,

contained in a hermetically sealed unit. This sealed unit contains

0.15 kg of the F gas R134a. GWP = 1430 (1 t CO2).

Power consumption

o-mode (Po) - Watts 0.50

left-on mode (Pl) - Watts 1.00

Programs MinutesKg kWh

Eco Cotton * 8 2.53 215

Eco Cotton 4 1.39 127

Synthetics 4 1.02 101

*This is the reference programme for the energy label and suitable to

dry normal wet cotton laundry. This is the most ecient programme

in terms of energy consumption for drying wet cotton laundry.

(Standard/Default starting conguration)

A B C

Product specificaties

Merk:	Whirlpool
Categorie:	Wasdroger
Model:	FT M10 81Y EU
Apparaatplaatsing:	Vrijstaand
Soort bediening:	Buttons,Rotary
Kleur van het product:	Wit
Ingebouwd display:	Ja
Warmtebron:	Electrisch
Breedte:	595 mm
Diepte:	649 mm
Hoogte:	849 mm
Type lader:	Voorbelading
Droogsysteem:	Warmtepomp
Trommelinhoud:	120 l
Uitgestelde start timer:	Ja
Startvertraging:	24 uur
Aantal droogprogramma's:	15
Droogklasse:	B
Duur cyclus:	215 min
Geluidsniveau:	65 dB
Energie-efficiëntieklasse:	A+
Energie consumptie:	308 kWu
Jaarlijks energieverbruik:	- kWu
Zelfreinigend:	Ja
Nominale capaciteit:	8 kg
Type beeldscherm:	LED