Whirlpool FFB 7238 WV SP Handleiding

Whirlpool Wasmachines FFB 7238 WV SP

Lees hieronder de 📖 handleiding in het Nederlandse voor Whirlpool FFB 7238 WV SP (4 pagina's) in de categorie Wasmachines. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

1 “ON/OFF” button

2 Programme selector

3 “Start/Pause” button

4 “Spin” button

5 “Intensive rinse” button

6 “Clean+” button /

“Key lock“ button

7 “Start delay” button

8 “FreshCare+”

9 “Temperature” button

DISPLAY INDICATORS

Door locked

FreshCare+ activated

Start delay activated

Key lock activated

Washing phase

Indicates washing phase of the cycle

Failure: Call Service

Refer to Troubleshooting section

Failure: Water lter clogged

Water cannot be drained; water lter

might be blocked

Failure: No water

No or not sucient inlet water.

In the event of any failure, refer to the

“TROUBLESHOOTING” section

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your product on

www.whirlpool.eu/register

CONTROL PANEL

PROGRAMME CHART

PRODUCT DESCRIPTION

1. Worktop

2. Detergent dispenser

3. Control panel

4. Door handle

5. Door

6. Water lter - behind plinth

7. Plinth (removable)

8. Adjustable feet (4)

DETERGENT DISPENSER

Main wash compartment

Detergent for the main wash, stain remover

or water softener. For a liquid detergent it

is recommended to use removable plastic

partition A (supplied) for a proper dosage. If

powder detergent is used, place the partition

into slot B.

Prewash compartment

Detergent for the prewash.

Softener compartment

Fabric softener. Liquid starch.

Pour in softener or starch solution only up to the “max” mark.

Release button 

Press to remove tray for cleaning.



* After programme end and spinning with maximum selectable spin speed, in default

programme setting.

** The duration of the programme is shown on the display.

6th Sense - the sensor technology adapts water, energy and programme duration to your wash load.

Eco Cotton - Test wash cycles in compliance with regulations 1061/2010. Set “

Cotton

” wash

cycle at a temperature of 40°C or 60°C to access this cycles.

This data may dier in your home due to changing conditions in inlet water temperature,

water pressure etc. Approximate programme duration values refer to the default setting of

the programmes, without options.

The values given for programmes other than the Eco 40-60

programme are indicative only.

Eco 40-60 - Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. The most efficient

programme in terms of energy and water consumption for washing normally soiled cotton laundry.

Note: spin speed values shown on the display can slightly differs from the values stated in the table.

For all Test Institutes

Long wash cycle for cottons: set wash cycle with a temperature of 40°C.Cotton

Synthetic program along: set wash cycle with a temperature of 40°C.Synthetics

Quick guide

Before using the appliance carefully read the Safety Instruction.

Before using the machine, it is imperative that the transport bolts are removed.

For more detailed instructions on how to remove them, see the Installation Guide.

+1 +2 +3 312

21 53

Max load 7 Kg

Power consumption in o -mode 0.5 W / in left-on mode 8.0 W Detergents and additives Recommend-

ed detergent

Residual

dampness % (*)

Energy

consumption kWh

Total water lt

Laundry

temperature °C

Programme

Temperatures Max. spin

speed

(rpm)

Max

load

(kg)

Duration

(h : m)

Prewash Main

wash Softener

Powder Liq-

uid

Setting Range

Mixed

(Variada/ Mistos)

40°C - 40°C 1000 7.0 ** –   – – – – –

White

(Blanca/ Brancos)

60°C - 90°C 1200 7.0 2:30     (90°) 52 1,36 75 55

Cotton

(Algodón/ Algodão)

40°C - 60°C 1200 7.0 3:50 –     53 0,98 75 45

Eco 40-60

40 °C 40°C

1151 7.0 3:25 –     53 0,89 47 35

1151 3.5 2:40 –     53 0,58 45 34

1151 1.75 2:10 –     53 0,51 39 33

Sport (Deporte/ Desporto)

40°C - 40°C 600 3.5 ** –   – – – – –

Duvet (Edredón/ Edredões)

30°C - 30°C 1000 3.0 ** –   – – – – –

Steam Refresh – – – 1 ** – – – – – – – – –

Spin & Drain

(Centrifugado y desagüe/

Centrifugação & Drenagem)

– – 1200 7.0 ** – – – – – – – – –

Rinse & Spin (Aclarado y centrif./

Enxag. & Centrif.) – – 1200 7.0 ** – –  – – – – – –

Rapid 30’

(Rápido 30’) 30°C - 30°C 800 3.5 0:30 –   – 73 0,19 31 27

20°C 20 °C - 20 °C 1200 7.0 1:50 –  

–

 52 0,16 64 22

Wool (Lana/ )Lã 40°C - 40°C 800 1.5 ** –   – – – – –

Delicates

(Delicados) 30°C - 30°C – 1.0 ** –   – – – – –

Synthetics (Sintéticos) 40°C - 60°C 1200 4.0 2:35 –     53 0,86 60 43

  Dosing required Dosing optional

Eco Cotton

60 °C 60 °C 1200 7.0 4:30 –     53 0,82 49 –

40 °C 40 °C 1200 7.0 3:50 –     53 0,98 75 –

PROGRAMMES

For choosing the appropriate programme for your kind of

laundry, always respect the instructions on the care labels

of the laundry. The value given in the tub symbol is the

maximum temperature possible for washing the garment.

Mixed (Variada/ Mistos)

For washing lightly to normally soiled resilient garments in cotton, linen,

synthetic bres and mixed bres.

White (Blanca/ Brancos)

For washing normally to heavily soiled towels, underwear, table and bed

linen, etc in resilient cotton and linen. Only when the temperature is

selected at 90°C the cycle is provided with a prewash phase before main

washing phase. In this case it is recommended to add detergent both, in

the prewash and main wash section.

Cotton (Algodón/ Algodão)

Normally to heavily soiled and robust cottons .

Eco 40-60

For washing normally soiled cotton garments declared to be washable

at 40 °C or 60 °C, together in the same cycle. This is the standard cotton

programme and the most ecient in terms of water and energy

consumption.

Sport (Deporte/ Desporto)

For washing lightly soiled sports clothing (tracksuits, shorts, etc.). For best

results, we recommend not exceeding the maximum load indicated in

the ‚‘‘PROGRAMME CHART‘‘. We recommend using liquid detergent , and

adding the amount suitable for half-load.

Duvet (Edredón/ Edredões)

Designed for washing eiderdown padded items such as double or single

duvets, cushions and anoraks. It is recommended to load such padded

items in the drum with the edges folded inwards and not to exceed ¾ of

the drum’s volume. For optimal washing, we recommend using a liquid

detergent.

Steam Refresh

This programme refreshes garments by removing bad odours and

relaxing the bres (1 kg, roughly 3 items). Insert dry items only (that are

not dirty) and select programme “Steam Refresh”. Garments will be a

little damp at the end of the cycle and can be worn after a few minutes.

The “Steam Refresh” programme makes ironing easier.

! Not recommended for wool or silk garments.

! Do not add softeners or detergents.

Spin & Drain (Centrifugado y desagüe/ Centrifugação & Drenagem)

Spins the load then empties the water. For resilient garments. If you

exclude the spin cycle, the machine will drain only

Rinse & Spin (Aclarado y centrif./ Enxag. & Centrif.)

Rinses and then spins. For resilient garments.

Rapid 30’(Rápido 30’)

For washing lightly soiled garments quickly. This cycle lasts only 30

minutes, saving time and energy.

20°C

For washing lightly soiled cotton garments, at a temperature of 20 °C.

Wool (Lana/Lã)

All wool garments can be washed using programme ‚“Wool“ even

those carryng the “hand-wash only “ label. For best results, use special

detergents and do not exceed max kg declaration of laundry.

Delicates (Delicados)

For washing particularly delicate garments. Preferably turn garments

inside out before washing.

Synthetics (Sintéticos)

For washing soiled garments made from synthetic bres (such as

polyester, polyacrylic, viscose, etc.) or cotton/synthetic blends.

Eco Cotton

For washing normally soiled cotton garments. At 40°C and 60°C.

FIRST TIME USE

To remove any manufacturing debris select the “Cotton (Algodón/

Algodão)” programme at a temperature of 60°C. Pour a small quantity of

detergent powder into the main wash compartment of the detergent

dispenser (maximum 1/3 of the quantity the detergent manufacturer

recommends for lightly soiled laundry). Start the programme without

adding any laundry.

DAILY USE

Prepare your laundry according to the recommendations in the

“HINTS AND TIPS” section. Load the laundry, close the door, open the

water tap and press the “ON/OFF” button to switch the wasching

machine on, the “Start/Pause” button ashes. Turn the programme

selector to the desired programme and select any option if needed.

The temperature and spin speed can be changed by pressing the

“Temp.”button or the “Centrifug.” button. Pull out the detergent dispenser

and add the detergent (and additives/softener) now. Observe the dosing

recommendations on the detergent pack. Then close the detergent

dispenser and press the “Start/Pause” button. The “Start/Pause”

button will light up and the door will be locked.

PAUSE A RUNNING PROGRAMME

To pause the wash cycle, press the “Start/Pause” ; the indicator light

will go o and the remaining time on display ash. To start the wash cycle

from the point at which it was interrupted press the button again.

OPEN THE DOOR, IF REQUIRED

After starting a programme, the “Door locked” indicator lights up to

show that the door can not be opened. As long as a wash programme is

running, the door remains locked. To open the door while a programme

is in progress, press the “Start/Pause” to pause the programme.

Provided the water level and/or temperature is/are not too high, the

“Door locked” indicator light goes o and you can open the door.

For example to add or remove laundry. Press the “Start/Pause” button

again to continue the programme.

PROGRAMME END

The “Door locked” indicator light goes o and the display shows

“End”. To switch o the washing machine after programme ends press the

“ON/OFF” button, the lights goes o. If you do not press “ON/OFF”

button, the washing machine will switch o automatically after about a

10 minutes. Close the water tap, open the door and unload the washing

machine. Leave the door ajar to allow the drum to dry.

OPTIONS

! If the selected option is incompatible with the programme set,

the incompatibility will be signalled by a buzzer (3 beeps) and the

corresponding indicator light will ash.

! If the selected option is incompatible with another previously set

option, only the most recent selection will remain active.

Clean+

Clean+ is an option working on 3 dierent levels (Intensive, Daily

and Fast) that are specially designed to set the right washing action,

depending on your cleaning needs:

Intensive : this option is designed for high levels of dirtiness,

removing most stubborn stains.

Daily : this option is designed to remove everyday stains.

Fast : this option is designed to remove lightly soiled stains.

Intensive rinse (Aclar. intens./ Enx. Intens.)

By selecting this option, the eciency of the rinse is increased and

optimal detergent removal is guaranteed. It is particularly useful for

sensitive skin. Press the button once, two or three times to select an

additional 1

, 2

or 3

rinses after the standard cycle rinse and

remove all traces of detergent. Press the button again to go back to the

“Normal rinse” rinse type.

Start delay ( Início diferidoInicio diferido/ )

To set the selected programme to start at a later time, press the button

to set the desired delay time. Symbol lights on the display when this

fuction is enabled. To cancel the delayed start, press the button again

untile the value ‚‘‘0‘‘ is shown on the display.

This option enhances washing performance by generating steam

to inhibit the proliferation of the main bad odour sources inside the

machine. After steam phase, the washing machine will perform gentle

tumbling through slow rotations of the drum. option starts after

the cycle ends for a maximum duration of 6h and you can interrupt it at

any time by pressing any button on control panel or turning the knob.

Wait around 5 minutes before door can be opened.

Temperature

Every programme has a predened temperature. If you want to change

the temperature, press the “Temp.” button. The value appears on the

display.

Spin

Every programme has a predened spin speed. If you want to change

the spin speed, press the “Centrifug.” button. The value appears on the

display.

Demo mode

To deactivate this function, switch the washing machine OFF. Than press

and hold “Start/Pause” button, within 5 seconds press also

“ON/OFF” button and hold both buttons for 2 seconds.

KEY LOCK

To lock the control panel, press and hold the “Key lock” button

for approximately 3 seconds. The symbol will light up on the

display to indicate that the control panel has been locked (with the

exception of the “ON/OFF“ button). This prevents unintentional

changes to programmes, especially with children near the machine. To

unlock the control panel, press and hold the “Key lock” button for

approximately 3 seconds .

BLEACHING

If you wish to bleach the laundry, load the washing machine and set the

Rinse & Spin (Aclarado y centrif./ Enxag. & Centrif.) programme.

Start the machine and wait for it to complete the rst water lling cycle

(roughly 2 minutes). Put the machine in pause mode by pressing the

“Start/Pause” button, open the detergent drawer and pour the bleach

(observe the recommended doses indicated on the package) into the

main wash compartment where the partition was previously mounted.

Restart the cycle by pressing the “Start/Pause” button.

If desired, it is possible to add fabric softener into the appropriate

compartment of the detergent drawer.

HINTS AND TIPS

Sort your laundry according to

Type of fabric/care label (cotton, mixed bres, synthetics, wool, handwash

items). Colour (separate coloured and white items, wash new coloured

items separately). Delicates (wash small items – like nylon stockings – and

items with hooks – like bras – in a cloth bag or pillow case with zip).

Empty all pockets

Objects like coins or lighters can damage your laundry as well as the

drum.

Follow the dosage recommendation / additives

It optimizes the cleaning result, it avoids irritating residues of surplus

detergent in your laundry and it saves money by avoiding waste of

surplus detergent

Use low temperature and longer duration

The most ecient programmes in terms of energy consumption are

generally those that perform at lower temperatures and longer duration.

Observe the load sizes

Load your washing machine up to the capacity indicated in the

“PROGRAMME CHART” table to save water and energy.

Noise and remaining moisture content

They are inuenced by the spinning speed: the higher the spinning

speed in the spinning phase, the higher the noise and the lower the

remaining moisture content.

CLEANING & MAINTENANCE

For any cleaning and maintenance, switch o and unplug the washing

machine. Do not use ammable uids to clean the washing machine.

Clean and maintain your washing machine periodically (at least 4 times

per year).

Cleaning the outside of the washing machine

Use a soft damp cloth to clean the outer parts of the washing machine.

Do not use glass or general purpose cleaners, scouring powder or similar

to clean the control panel – these substances might damage the printing.

Checking the water supply hose

Check the inlet hose regularly for brittleness and cracks. If damaged,

replace it by a new hose available through our After-Sales Service or

your specialist dealer. Depending on the hose type: If the inlet hose has

a transparent coating, periodically check if the colour intensies locally. If

yes, the hose may have a leak and should be replaced

Cleaning the water lter / draining residual water

If you used a hot wash programme, wait until the water has cooled down

before draining any water. Clean the water lter regularly, to avoid that

the water cannot drain after the wash due to obstruction of the lter. If

the water cannot drain, the display indicates that the water lter may be

clogged.

Remove the plinth by using the screwdriver: push downwards one side

of the plinth with your hand, then push the screwdriver into the gap

between plinth and front panel and pry open the plinth. Place a broad,

at container beneath the water lter, to collect the drain water. Slowly

turn the lter counterclockwise until water ows out. Let the water ow

out, without removing the lter. When the container is full, close the

water lter by turning it in clockwise. Empty the container. Repeat this

procedure until all the water has drained. Lay a cotton cloth beneath

the water lter, which can absorb a small amount of rest water. Then

remove the water lter by turning it out anti clockwise. Clean the water

lter: remove residues in the lter and clean it under running water.

Insert the water lter and reinstall the plinth: Reinsert the water lter

again by turning it in clockwise direction. Make sure to turn it in as far

as it goes; the lter handle must be in vertical position. To test water

tightness of the water lter, you can pour about 1 liter of water into the

detergent dispenser. Then reinstall the plinth.

ACCESSORIES

Contact our After-Sales Service to check if the following accessories are

available for your washing machine model.

Stacking kit shelf

By which your dryer can be xed on top of your washing machine to save

space and to facilitate loading and unloading your dryer in the higher

position.

TRANSPORT AND HANDLING

Never lift the washing machine by holding it at the worktop.

Pull out the mains plug, and close the water tap. Make sure that door

and detergent dispenser are properly closed. Disconnect the inlet hose

from the water tap, and remove the drain hose from your draining point.

Remove all rest water from the hoses, and x them so that they cannot

get damaged during transport. Ret the transport bolts. Follow the

instructions for removing the transport bolts in the INSTALATION GUIDE

in reverse order.

Quick guide

Product specificaties

Merk:	Whirlpool
Categorie:	Wasmachines
Model:	FFB 7238 WV SP
Apparaatplaatsing:	Vrijstaand
Soort bediening:	Buttons, Rotary
Kleur van het product:	Wit
Deurscharnieren:	Rechts
Ingebouwd display:	Ja
Gewicht:	65000 g
Breedte:	595 mm
Diepte:	575 mm
Hoogte:	845 mm
Netbelasting:	1850 W
Type lader:	Voorbelading
Deurkleur:	Wit
Snoerlengte:	1.2 m
Trommelinhoud:	52 l
Resterende tijd indicatie:	Ja
Wi-Fi-besturing:	Nee
Energie-efficiëntieklasse:	D
Gewicht verpakking:	66000 g
Breedte verpakking:	640 mm
Diepte verpakking:	590 mm
Hoogte verpakking:	870 mm
Energieverbruik wassen:	0.822 kWu
Waterconsumptie per cyclus:	44 l
Centrifuge-droger klasse:	B
Geluidsniveau (wassen):	51 dB
Sopschuimbewaking:	Ja
Onbalanscontrolesysteem:	Ja
Aanpasbare centrifugesnelheid:	Ja
Maximale centrifugesnelheid:	1200 RPM
Stroom:	10 A
Geluidsemissieklasse:	C
Inverter technologie:	Ja
Functie voor kleding toevoegen (pauze):	Ja
Geluidsniveau bij centrifugeren:	80 dB
Near Field Communication (NFC):	Nee
Restvochtpercentage:	53 procent
Cyclustijd (max):	270 min
Tijdsduur tot uitschakelen:	30 min
Aantal wasprogramma's:	14
Duur cyclus (snelwas programma):	30 min
Energieverbruik per 100 cycli:	69 kWu
Aan-/uitknop:	Ja
Doseringsassistent:	Ja
Half-geladen:	Ja
Stroomverbruik (in standby):	0.5 W
Kijkglas:	Ja
Watertoevoer:	Cold, Hot
Stroomverbruik (ingeschakeld houden):	8 W
LED programmavoortgangsindicator:	Ja
Display verlichting:	Ja
Kleur van de verlichting:	Wit
Uitgave lade type:	2-weg
Nominale capaciteit:	7 kg
Universele motor:	Ja
AC-ingangsspanning:	220 - 240 V
AC-ingangsfrequentie:	50 Hz
Type beeldscherm:	LCD
Energie-efficiëntieschaal:	A tot G
Niet spoelen:	Ja
Wasprogramma's:	Cotton, Eco, Wool, Mix, Pillow, Quick, Steam, Synthetics, White, Rinse & spin, Spin/drain, Delicate/silk