Whirlpool AWZ8HP/PRO Handleiding

Whirlpool Wasdroger AWZ8HP/PRO

Lees hieronder de 📖 handleiding in het Nederlandse voor Whirlpool AWZ8HP/PRO (4 pagina's) in de categorie Wasdroger. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your product on

www.whirlpool.eu/register

Quick guide

Before using the appliance carefully read the Safety Instructions.

If this last stage is not carried out immediately, some machines and/or

some programmes/options are equipped with Crease Care system. For

some hours, after the end of drying, the drum rotates at regular intervals

to prevent the formation of creases.

In case of power failure, it is necessary to press the button Start/

Pause to restart the cycle.

Ecomonitor

This indicator shows the energy consumption level according to

the programme and the options set. The consumption is

proportional to the lines on the display,by the ecomonitor icon.

Drum light (If present)

Some models are equipped with drum internal light to make use of the

dryer easier. No setting is required. For instance, the light goes on when

opening the door.

OPENING OF THE DOOR DURING THE CYCLE

During operation, it is possible to open the door. After having closed

it, press the button Start/Pause again to restart the dryer.

SETTINGS

The various settings can be selected with the modes described in

"Navigation".

Language shows the languages available on display.

Keys Tone allows adjusting or removing the setting sounds of the

machine keys.

Cycle End Alert allows adjusting or removing the cycle end sounds

of the machine.

Display Contrast allows adjusting the display brightness

Remember last used cycle selects the last used cycle automatically

when starting the machine, otherwise it restarts from the default

programme.

Eco Mode allows adjusting the machine switching o after the cycle

end.

Factory Settings allows resetting the factory settings.

FIRST TIME USE

When starting the appliance for the rst time, the control panel

will show the set language menu automatically. Turn the knob

to visualize the languages available in the machine. Press the

knob to conrm the selected languages.

Make sure that the water tank is correctly inserted. Make sure

that the drain hose on the back of the dryer is xed correctly,

either to the dryer’s water tank, or to your domestic sewage

system.

The dryer must be installed in a room with a temperature

ranging between 5°C and 35°C to ensure proper operation.

Before you use your dryer ensure that it has been in a upright

position for at least 6 hours.

Should you wish to change the opening side of the door, please

contact our After-sales Service. (See phone number in the

warranty booklet).

NAVIGAZIONE FUNCTIONS SELECTION

The navigation can be made when the LED of the required

function is on. Browse the function by rotating the knob to

visualise the possible selections on the display.

Press the knob to conrm.

The machine proposes a path for selecting programmes and

options, with starting in sequence of the functions LEDs.

However, the programmes and options can be selected

autonomously by simply pressing the programmes button or

the required option.

DAILY USE

Doing this will keep your machine working at its BEST!

Remember to empty your water tank after each drying cycle.

Remember to clean your lters after each drying cycle. (Refer

to section Care & Maintanence).

1. Open the door and load garments. Always refer to instructions

on clothing labels and the max loads indicated in the programme

section. Empty pockets. Make sure garments do not get caught

between the door and/or the door lter.

2. Close the door.

3. Press the button On/O.

4. Select the required programme according to the type of laundry.

The LED of the button P must remain on. Rotate the knob to

select the required value and then press the knob to conrm.

5. Select the options, if necessary. If the options have any

submenus, they can be browsed by rotating the knob and

then conrmed by pressing the knob.

6. To start the cycle, press the Start/Pause button.

7. At the end of the drying cycle, a buzzer will beep. The display

signals the end of the cycle. Pulling out the load immediately

helps to prevent the formation of creases on laundry.

8. Turn the machine o by pressing the button On/O, open the

door and pull clothing out. If the machine is not switched o

manually, after about a quarter of an hour from the cycle end, the

appliance turns o automatically to save energy.

CARE LABEL

Always check the care labels, especially when placing garments in

the tumble dryer for the  rst time. Below are the most commonly

used symbols:

May be tumble dried.

Do not tumble dry.

Tumble dry – high heat.

Tumble dry – low heat.

*MAX LOAD 8 Kg (Dry load)

CONTROL PANEL

Refer to Troubleshooting section.

COTTON

2:20

COTTON

COTTON COTTON

2:20

2:202:20

1. 10.

11.8. 13.7. 129. 4.

1 ON/OFF button (Reset if long pressed)

2 Programme button

3 Programme selection Knob (rotate to

select / press to conrm)

4 Start/Pause button

5 Programmes area

6 Display

Options Buttons

7 Settings

8 Fresh Care+

9 Keys Locked

10 Start Delay

11 Drying Time

12 Drying Level

13 Cycle Options

OPTIONS BUTTONS

These buttons serves to personalise the selected programme

according to personal requirements. Not all options are available

for all programmes. Some options are incompatible with the

ones previously set. The buzzer and/or blinking indicators

will signal the incompatibility. If the option is available, the

option indicator will stay on. Some options may be kept in the

memory of the programme if selected in the previous drying.

Some options may be kept in the memory of the programme if

selected in the previous drying of the same programme.

P PROGRAMS

Eco Cotton kg Max*

Standard cotton programme, suitable to dry normally wet

cotton laundry. Most ecient programme in terms of energy

consumption for drying cotton laundry. The values on the Energy

Label are based on this programme.

Cotton kg Max*

For drying cotton laundry.

Mixed kg 4

This programme is ideal for drying cotton and synthetic

fabrics together.

Synthetics kg 4

For drying laundry made of synthetic bres.

Delicates kg 2

For drying delicate laundry which needs gentle treatment.

Wool kg 1

Programme for drying wool clothing. It is advisable to turn

the garments inside out before drying. Leave to dry naturally the

heaviest edges that are still damp.

Big Items kg Max*

This programme is intended for drying cotton sheets.

Rapid 30' kg 0,5

Ideal for drying cotton garments spun at high speed in the

washing machine.

Shirts kg 3

This is a programme for Shirts made from cotton or cotton

blend/synthetics.

Easy Ironing

This cycle allows to extend the bres of garments thus

making ironing and folding easier. Do not use in case of

garments that are still wet. Suitable for small loads of cotton

textiles or cotton blends.

Refresh

A short programme suitable for refreshing bres and

garments by means of fresh air. Do not use with garments that are

still wet. It can be used on with any load size but is more eective

with small loads. The cycle duration is about 20 minutes.

Specials

To set one of the following programmes, use the knob for

selecting and conrming the position of the "Special Programs".

The programmes list is accessed by rotating the knob. The

display shows the names of the available programmes. Conrm

the required programme by pressing the knob.

• Jeans kg 3

For drying cotton jeans-wear and garments made of robust

cotton, like denim, such as trousers and jackets.

• Miniload kg 1

Economic drying of small laundry loads.

• Sport kg 4

For drying sports garments made of synthetics or cotton.

• Silk kg 0,5

Gentle drying of silk garments.

• Coloured kg Max*

Programme for gentle drying suitable for coloured garments.

• Downjackets kg 2,5

To dry down jackets, giving their natural softness back (2

jackets).

OPTIONS

After selecting the programme, the various options can be

set, if necessary.

Drying Level

Each programme has a pre-set drying level. In some

programmes, the residual moisture on garments can be set.

Pressing the related option button, the LED goes on. Turn the

knob to browse among the levels available for each programme.

Press the knob to conrm.

Iron Dry: a very delicate ironing. Suitable for making ironing

of garments easier immediately after the end of the cycle.

Hanger Dry: a level intended for delicate garments ready to

be hanged.

Cupboard Dry: the garments are ready to be folded and put

away

Extra Dry: used for garments to be worn at the end of the

cycle.

Drying Time

In some programmes, the drying time can be set. Pressing

the related option button, the LED goes on. Turn the knob to

visualize the times available for each programme. Press the knob

to conrm.

Start Delay

Pressing the related option button, the LED goes on. Turn the

knob to browse among the times available for each programme.

Press the knob to conrm.

In case of door opening, after closing, it is necessary to press the

button Start/Pause again.

Fresh Care+

If garments are left inside the drum after the end of the

cycle, they are subject to bacterial proliferation. This option allows

to prevent this proliferation by controlling the temperature and

the rotation of the drum. This treatment has a max. duration of 6

hours after the end of the programme set. This option remains in

memory if selected in the previous drying.

If this option is used together with the Start Delay, a crease treatment

(a periodic rotation of the drum) is added in the Start Delay phase.

Keys Locked

This option makes all machine controls inaccesible, except

the button On/O.

When the machine is on:

• to activate the option, keep the button pressed until the

indicator goes on.

• To disable the option, keep the button pressed until the

indicator goes o.

This option remains in memory if selected in the previous drying.

Cycle Options

This buttons serves to access a menu of available options (see

next options). After having pressed the button, turn the knob

to select the option and press it to conrm.

• Rapid

Enables quicker drying.

• Gentle

Enables a more gentle treatment of the laundry by reducing the

drying temperature.

The duration of these programs will depend on the size of

the load, types of textiles, the spin speed used in your washer

and any extra options selected. In machines equipped with

display, the duration of the cycles is shown on the control

panel. The remaining time is constantly checked and adjusted

during the drying cycle to show the best possible estimate.

The wool drying cycle of this machine

has been approved by The Woolmark

Company for the drying of wool gar-

ments labelled as “hand wash” provided

that the garments are dried according

to the instructions issued by the ma-

nufacturer of this machine. Follow the

garment care label for other laundry

instructions. . The Woolmark symbol is a Certi cation mark in

many countries.

M1762

Quick guide

• Cycle end signal

This option activates a prolonged buzzer at the end of the

cycle. Enable it if you are not sure to hear the normal sound at the

end of the cycle.

This option remains in memory, if selected in the previous drying.

Heat Pump System

The heat pump contains uorinated greenhouse gases,

contained in a hermetically sealed unit. This sealed unit contains

0.18 kg of the F gas R134a. GWP = 1430 (1 t C02).

Power consumption

o-mode (Po) - Watts 0.50

left-on mode (Pl) - Watts 1.00

Programs MinutesKg kWh

Eco Cotton* 8 1.78 194

Eco Cotton 4 1.15 135

Synthetics 4 0.73 95

* This is the reference programme for the energy label and suitable

to dry normal wet cotton laundry. This is the most ecient

programme in terms of energy consumption for drying wet cotton

laundry. (Standard/Default starting conguration).

TRANSPORT AND HANDLING

Never lift the dryer by holding it at the worktop.

1. Unplug the dryer.

2. Make sure that door and water tank are properly closed.

3. If the drain hose is connected to your sewage system, x the

drain hose on the rear of the dryer again (see Installation Guide).

A B

PRODUCT DESCRIPTION

1. Water tank

2. Air Intake

3. Bottom lter

4. Door lter

CARE AND MANTENANCE

Unplug the dryer during the cleaning and maintenance

procedures.

Emptying the water tank after each cycle (see Fig. A).

Pull the container out of the dryer and and empty it into a

sink or other suitable drain, then place it back. Do not use the dryer

without having inserted the container back in place.

Cleaning the door lter after each cycle (see Fig. B).

Pull the lter out and clean it by removing the lint from the

lter surface under running water or using a vacuum cleaner. For

optimal performance, dry up all the lters before inserting them

back in place. Do not use the dryer without having reinserted the

lter in place.

Remove the door lter as described below:

1. Open the door and pull upwards.

2. Open the lter and remove lint from all its parts. Replace it

correctly. Ensure it is completely inserted ush with the dryer seal.

Cleaning the bottom lter when the relevant indicator

turns on (see Fig. C).

Pull the lter out and remove the lint from its surface by washing

it under runing water or by using a vacuum cleaner.

However, it is advisable to clean this lter after each cycle to

optimise drying performance. Do not use the dryer without having

inserted the lter in place rst.

Remove the bottom lter as described below:

1. Open the lower door.

2. Take the handle and pull the lower lter out.

3. Open the rear side of the lter and remove the lint from the

inner surface of the mesh.

4. Clean the bottom lter chamber avoiding the direct contact

with the leaves.

5. Close the rear side of the lower lter and place it back by

checking it is perfectly integrated in place.

6. Lower the lter handle and close the bottom door.

7. Make sure the air intake is free.

The lters are essential parts for drying. They are intended

to collect the lint formed during drying process. In case

of clogged lters, the air ow inside the dryer would be

seriously aected: the drying times would be longer, the

energy consumption would increase and the dryer could be

damaged. If these procedures are not carried out properly,

the dryer may not start.

Product specificaties

Merk:	Whirlpool
Categorie:	Wasdroger
Model:	AWZ8HP/PRO
Apparaatplaatsing:	Vrijstaand
Soort bediening:	Touch
Kleur van het product:	Wit
Ingebouwd display:	Ja
Warmtebron:	Electrisch
Gewicht:	44 g
Breedte:	595 mm
Diepte:	656 mm
Hoogte:	849 mm
Type lader:	Voorbelading
Droogsysteem:	Warmtepomp
Uitgestelde start timer:	Ja
Kinderslot:	Ja
Wi-Fi-besturing:	Nee
Waterniveau-indicator:	Nee
Droogklasse:	B
Duur cyclus:	194 min
Geluidsniveau:	64 dB
Anti-kreuk functie:	Nee
Energie-efficiëntieklasse:	A++
Energie consumptie:	1.78 kWu
Jaarlijks energieverbruik:	234 kWu
Gewicht verpakking:	420 g
Breedte verpakking:	640 mm
Diepte verpakking:	680 mm
Hoogte verpakking:	880 mm
Draairichting deur verwisselbaar:	Ja
Geschikt voor paneelaanpassing:	Nee
Aanpasbare centrifugesnelheid:	Ja
Zelfreinigend:	Nee
Inverter technologie:	Ja
Near Field Communication (NFC):	Nee
Land van herkomst:	Polen
Douane productcode (TARIC):	8451210000
Verlichting in trommel:	Nee
Nominale capaciteit:	8 kg
Indicator filterreiniging:	Ja