Whirlpool AWZ 410/S Handleiding

Whirlpool Wasmachine AWZ 410/S

Lees hieronder de 📖 handleiding in het Nederlandse voor Whirlpool AWZ 410/S (4 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
How to use the washing machine
To remove any residual water used in testing by the manufacturer, we recommend that you carry out a short wash cycle without laundry.
Open the tap. Close the door. Pour a small amount of detergent (about 30 ml) into the detergent dispenser.
Select a short wash programme (see programme chart). Press theStart/On Off” button (depends on model).
Sort the laundry Sort the laundry according to:
Fabric type / care label symbol
Cottons, mixed fibres, easy care/synthetics, wool, handwashed items.
Colours
Separate coloured and white articles. Wash new coloured articles separately.
Size
Wash items of different sizes in the same load to improve washing efficiency and distribution in the drum.
Delicates
Wash delicates separately: Use a special programme for Wool , curtains and other delicates. Always remove
curtain glides or wash curtains with the glides inside a cotton bag. Use the special program for handwash fabrics.
Wash small articles (e.g. nylon stockings, belts etc.) and articles with hooks (e.g. bras) in special cotton bags for
washing machines or in zipped pillow cases.
Prepare the laundry Empty all pockets
Coins, safety pins and similar items can damage your laundry and the appliance drum.
Closures
Close zips and hooks and eyes; loose belts or ribbons should be tied together.
Stain removal
Blood, milk, egg etc. are generally removed by the enzyme phase of the programme.
To remove red wine, coffee, tea, grass and fruit stains etc. add a stain removing agent in detergent dispenser
or chlorine bleach in compartment (depending on model). Particularly stubborn stains can be treated
with stain remover before the wash.
Dyeing and Bleaching
Commercially available products usually consist of a dye colour, fixing agent and salt. Pour the dye colour, the
fixing agent and then the salt directly into the empty drum. Load the laundry only afterwards. Use exclusively
dyes and bleaches recommended for washing machines. Follow the Manufacturer’s instructions. Plastic and
rubber components of the machine can be stained by dyes. Make sure that all zips are closed and pockets are
empty. Make sure there are no cigarette lighters among the items. Turn the items of clothing inside out.
Open the door To open the door press the button inside the handle and pull. If the child lock is active, deactivate it.
Load the laundry
and close the door. For optimal washing results, place items loosely into the washing machine. Close the door.
Choose and
measure out the
detergent and
additives
The type of detergent depends on:
The type of fabric (cottons, synthetics, delicates, wool - when washing woollens remember to use a detergent
suitable for woollens), the colour, the washing temperature, the degree and type of soiling.
Dosage
Follow the dosage recommendations on the detergent pack. For the water hardness in your area, you can
request information from the water company. Soft water requires less detergent than hard water (refer to the
water hardness table in the operating instructions).
Switch on the
washing machine
and select the
programme
To switch on the washing machine, press theOn/Off button. To select the programme, turn the knob. The
corresponding symbol will appear on the display. To change the programme once the wash cycle has started,
turn the knob to ” and set the new programme.
Select the desired
special options
Select an option by pressing the corresponding button. Press the button again to cancel the option.
Selecting
any option the indication lights up. When the combination of programme, additional options and
temperature is not possible, the indication lights switch off automatically. Unsuitable combinations
of options are deselected automatically.
Switch on the
appliance Open the tap and press the
“Start button. The current stage of the programme is shown on the display.
Programme end –
Unload the laundry The Start button switches off at the end of the wash cycle. Check functions.
Switch off the
appliance
Turn the knob to ”. Turn off the tap. Open the door and unload the machine.
Leave the door ajar to allow the drum to dry out.
3GB20104.fm Page 1 Wednesday, July 7, 2004 2:18 PM
Black process 45.0° 150.0 LPI
* Programmes in conformity with IEC/EN 60456.
Programme table Detergent and additives Options
Programme Care
Labels Type of wash Load
kg
Fabric-
Softener
Main
Wash Prewash Start
Delay Prewash Intensive
Rinse
Rinse
Hold Spin Quick-
wash
Max.
Speed
Spin
Cotton
90°, 75°,
60°, 40°,
30°
Averagely to lightly soiled cottons, bed linen, table linen,
underwear, towels, shirts, etc.
For heavily soiled loads the “Prewash“ option can also be
selected.
5,0 LYe s L L L L L L L 1000
Synthetic
60°, 50°,
40°, 30°
Slightly to normally soiled blouses, shirts, overalls etc.
made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or blends with cotton.
For heavily soiled loads the “Prewash“ option can also be
selected.
2,5 LYe s L L L L L L L 800
Delicate
40°, 30°
Curtains and delicate clothing, dresses skirts, shirts and
blouses.
“Intensive Rinse” is not possible in this programme.
1,5 LYe s L L L 500
Wool
40°, 30°,
20°
Only machine washable woollens with pure new wool
label. 1,0 LYe s L L800
Hand
wash
Textiles made of linen, silk, wool and viscose marked as
“handwashable”. 2,0 LYe s L L800
Cold
wash
Averagely to lightly soiled cottons, bed linen, table linen,
underwear, towels, shirts, etc.
For heavily soiled loads the “Prewash“ option can also be
selected. A spin cycle is carried out at the end of this
programme.
5,0 LYe s LL L L 1000
Rinse
To rinse and refresh laundry. 5,0 L— — L L1000
Drain/
Spin
/ Drain and spin. — — L L L 1000
3GB20104.fm Page 2 Wednesday, July 7, 2004 2:18 PM
Black process 45.0° 150.0 LPI
What to do if...
...The appliance will not
start, the Start button
is not blinking:
Check
whether:
The appliance is plugged in.
The wall socket is functioning correctly (use a table lamp or similar).
...The appliance will not
start, but the Start
button is blinking:
Check
whether:
The appliance door is properly closed.
A programme has been selected.
The water tap is open. If not, open the tap and press the Start button.
...No water supply: Check
whether:
The tap is turned on completely.
Kinks are present in water hose.
The water hose filter is clogged.
The water hose is frozen up.
...Waste water not
pumped out:
Check
whether:
The drain hose is correctly installed (see “Installation Instructions” in the
Instructions Manual.
The filter is clogged.
The drain hose is frozen up.
...Detergent and
additive product
residues in detergent
drawer at end of wash:
Check
whether:
The siphon is correctly installed and clean (see “Care and Maintenance” in the
Instructions Manual).
Enough water is being supplied. The mesh filters between the inlet hose and
the tap could be clogged (see “Care and Maintenance” in the Instructions
manual); check and clean the filter two or three times a year (see “Removing
the filter” in the Instructions Manual).
Note:
Too much detergent can result in excess foam formation, which reduces washing
efficiency. If the appliance detects excessive foam it may prevent spinning.
Insufficient detergent may result in grey laundry, deposits on the drum, tub and
heater. To prevent dispensing problems when using highly concentrated powder
and liquid detergents, use the special detergent ball or bag supplied with the
detergent and place it inside the drum.
Whitish residues on dark fabrics are caused by insoluble compounds used in
modern phosphate-free powder detergents. If this occurs, shake or brush out
the fabric or use liquid detergents.
Keep detergents and additives in a dry place and out of reach of children.
Use only detergents and additives specifically produced for domestic washing machines.
If you use descaling agents, dyes or bleaches, make sure they are suitable for
washing machine use. Descaler could contain components that can attack parts
of your washing machine.
Do not use any solvents (e.g. turpentine, benzine, etc.). Do not machine wash
fabrics that have been treated with solvents or flammable liquids.
...Machine vibrates
during spin cycle:
Check
whether:
The machine is perfectly horizontal with all four feet on ground
(see “Installation” in the Instructions Manual).
The transit bolts have been removed. The transit bolts must be removed
before the appliance can be used (see “Installation” in the Instructions manual).
...Final spin results are
poor:
Check
whether:
The appliance has an imbalance detection and correction system. If individual
heavy articles are loaded (bathmat, bathrobe, etc.) this system may reduce the
spin speed automatically to protect the appliance or even interrupt the spin cycle
altogether, if the imbalance is too great even after several spin starts.
If the laundry is still too wet at the end of the cycle, add smaller articles of
laundry and repeat the spin cycle.
Excessive foam formation may also prevent spinning. Ensure correct amount of
detergent is used.
AFTER SALES SERVICE
If, after carrying out the above checks, the malfunction persists or appears again, turn the appliance off and call our After-Sales Service (see
guarantee).
Specify:
The nature of the problem
The type and model of washing machine
The service code (the number after the
word Service). The After-Sales Service
sticker is on the right side of the open door.
3GB20104.fm Page 3 Wednesday, July 7, 2004 2:18 PM
Black process 45.0° 150.0 LPI


Product specificaties

Merk: Whirlpool
Categorie: Wasmachine
Model: AWZ 410/S

Heb je hulp nodig?

Als je hulp nodig hebt met Whirlpool AWZ 410/S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wasmachine Whirlpool

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine