Whirlpool awm 1000 silver Handleiding

Whirlpool Wasmachine awm 1000 silver

Lees hieronder de đź“– handleiding in het Nederlandse voor Whirlpool awm 1000 silver (2 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
GB AWM 1000 PROGRAMME CHART
5019 301 15195
1) For improved garment care spin speed is restricted to 1000 rpm in this programme.
2) For improved garment care spin speed is restricted to 400 rpm in this programme. Whirlpool is a registered trademark of Whirlpool USA
The wool wash cycle for this machine has been tested and approved by The Woolmark Company for
the washing of Woolmark garments labelled as “machine wash” provided that the garments are washed
according to the instructions on the garment label and those issued in this programme chart. M0301
Programme Care
labels
Type of wash/Notes
- For temperature selection, respect the manufacturer’s
recommendation on the care label.
Max.
Load
kg
Detergents and additives Special Options Max.
Spin
Speed
rpm
Tempe-
rature
°C
Pre-
wash Main
wash Softener Start
delay Easy
ironing Pre-
wash Extra
rinse Rinse
hold Variable
spin
Cotton /
Antibacterial
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria, ensuring
sanitization of your laundry. The bacteria removal efficiency has been tested
following a similar methodology to the NF EN 13697 standard of Nov. 2001.
With heavily soiled laundry the additional “Prewash” option can be selected as well.
10.0 ❉Yes ❉❉ ❉❉❉❉ ❉1200 20 to 95
Colours
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen. 10.0 ❉Yes ❉❉ ❉❉❉❉ ❉1200 20 to 60
Synthetics
Slightly to normally soiled blouses, shirts etc. made of polyester (Diolen, Trevira),
polyamide (Perlon, Nylon) or blends with cotton. 4.5 ❉Yes ❉❉ ❉❉❉❉ ❉
1000 1) 20 to 60
Daily load
Programme for slightly to normally soiled fabrics made of cotton and/or synthetic
fibres. 4.5 —Yes ❉❉ ❉—❉❉ ❉1200 20 to 60
Rapid plus
Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and
blends with cotton. 4.5 —Yes ❉❉ ❉—❉❉ ❉1200 20 to 30
Delicate Curtains and delicate dresses, skirts, shirts and blouses. 3.0 ❉Yes ❉❉ ❉❉❉❉ ❉
1000 1) 20 to 40
Wool
Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is approved by The Woolmark Company for the washing
of Woolmark garments labelled as “machine wash” provided that they are
washed according to the instructions on the garment label and those issued in
this programme chart.
If you select “Rinse Hold” do not leave items to soak for too long.
2.0 —Yes ❉❉ ❉—— ❉❉
1000 1) 20 to 40
Handwash Textiles made of silk, linen, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is
used in this programme. 2.5 —Yes ❉❉ ❉—— ❉❉
400 2) 20 to 40
Big items
Blankets made of synthetic fibres, bedcovers filled with polyester or other
artificial fibres, sleeping bags, bathmats and similar items. 3.0 ❉Yes ❉❉—❉❉ ❉ ❉
1000 1) 20 to 95
Gentle spin —In this programme spinning is gentle. Same as the spin cycle in the “Wool”
programme. 4.5 ——— ❉———— ❉1000 1) —
Spin —In this programme spinning is intensive. Same as the spin cycle in the “Colours”
programme. 10.0 ——— ❉———— ❉1200 —
Rinse & Spin —Same as the last rinse and the final spin in the “Colours” programme. 10.0 ——❉❉——❉❉ ❉1200 —
d
r
e
a
m
s
p
a
c
A. “Door locked” indication
B. “Aquastop” indication
C. “Water tap closed” indication
D. Temperature selection buttons
E. Programme selector
F. “Start delay” button
G. “Reset/Unlock door” button
H.“Child lock” button
I. “Variable spin” button
J. Programme sequence indicator
K. “Start/Pause” button
Selecting any option the indication lights up.
When the combination of programme,
additional options and temperature is not
possible, the indication lights switch off
automatically and a signal sounds.
❉ : optional / yes: dosing required.
E
DI
F
B
C
H
K
G
AJ
}
5019 301 15195
Whirlpool is a registered trademark of Whirlpool USA
Add the detergent as described in the programme
table or in the chapter “Detergent and Additives” of
the Instructions for Use.
1. Turn the programme selector to the desired
programme.
2. The remaining time display shows the duration
of the chosen programme (in hours and
minutes) and the lamp of the “Start/Pause”
button flashes.
3. The indicator of the predefined spin speed
corresponding to the selected programme lights
up; it can be altered by pressing the “Variable
spin” button. The recommended temperature
(see indicator) can be altered by pressing the
“+” or “–” button.
Selecting any option the indication lights up.
When the combination of programme,
additional options and temperature is not
possible, the indication lights switch off
automatically and a signal sounds.
“Easy ironing” button
• Can be selected to reduce creasing.
• Increases the water quantity and the clothes are
spun very gently.
“Prewash” button
• Only for heavily soiled laundry (e.g. sand,
granular dirt). The cycle time increases by
approx. 15 minutes.
• Do not use liquid detergent for the main wash
when activating the “Prewash” button.
“Extra rinse” button
• More water and a longer time in rinse cycle is
added.
• This option is particularly suitable for areas with
very soft water, for baby clothes and to help
people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water
without being spun: this prevents creasing and
colours from changing.
• This option is particularly recommended for the
programme “Synthetics” or “Delicate”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain
only.
Note: The programme stops to “Rinse hold” as
soon as the “Rinse hold” light in the programme
sequence indicator lights up.
Terminate the “Rinse hold” option :
• Press the “Rinse hold” button again; the
programme will terminate automatically with the
final spin cycle for the present wash programme.
CONSUMPTION DATA
Programme Temperature
Selector
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approximate programme
duration*
(hours : minutes)
Cotton / Antibacterial 95 10.0 99** 3.15 2:45
Colours*** 60 10.0 92 1.70 2:45
Colours 60 4.0 50 1.10 1:35
Colours 40 10.0 92 0.96 2:35
Synthetics 40 4.5 58 0.65 1:30
Daily load 40 4.5 58 0.65 1:00
Rapid plus 30 4.5 38 0.40 0:30
Delicate 30 3.0 70 0.45 0:50
Wool 40 2.0 60 0.50 0:35
Handwash 30 2.5 60 0.30 0:31
Big items 40 3.0 85 0.80 1:30
Prewash cycle increases programme duration by approximately 15 min. Consumption values were measured in normalized conditions in
compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the
water supply pressure and temperature, the load and the type of wash.
*The remaining time indicator can deviate from the values in the table, because it takes into account the operating conditions
applicable at that time.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
*** Reference programme for energy label.
ADD DETERGENT, CLOSE THE DOOR
AND SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
• If you do not wish to spin the clothes, press the
“Reset/Unlock door” button. The water is
drained out then, before the door can be opened.
“Variable spin” button
• Every programme has an automatic predefined
spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
The “Start delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper. Do not use liquid detergent
when activating the “Start delay”.
• Select programme, temperature and options.
• Press the “Start delay” button to select the delay
time by 1 to 23 hours;
• Press the “Start/Pause” button .
• The time delay indication disappears when the
programme starts and it is replaced by the
remaining time.
• The number of hours preselected can later be
reduced pressing again the “Start delay” button.
To cancel the “Start delay” .
• Turn the programme selector to the “ ” position.
• Reselect the desired programme and options
and press the “Start/Pause” button .
Turn on the tap and press the “Start/Pause”
button . The pilot lamp of the “Start/Pause”
button lights up.
The indicator lamps show the sequence reached in
the programme. After starting the programme, the
sequence indication runs from top to bottom
through Prewash, Wash, Rinse, Spin.
When a sequence of the programme is finished the
corresponding lamp goes out.
Each time a programme starts the door is locked, the
“Door locked” indication light comes on and approx.
0.5 litres of water enters the machine. In the
programmes Cotton / Antibacterial, Colours,
Synthetics, Daily load and Rapid plus, for 10 minutes at
the beginning of the Main Wash the programme can be
interrupted by pressing the “Start/Pause” button
and the door can be opened again, e.g. to add more
washing. After this time, the door remains locked until
the end of the programme and must on no account be
forced open. You will find more information about
door locking in the Instructions for Use.
• The time remaining is “0:00” and the “End” light
is on.
1. Turn the programme selector knob to the “ ”
position.
2. Turn the tap off and leave the door ajar to allow
the drum to dry.
1. Press the “Start/Pause” button to
interrupt the programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the “Start/Pause” button again. The
new programme continues at the same position
where the previous programme was interrupted.
Do not add detergent for this programme.
Press the “Reset/Unlock door” button for at
least 3 seconds. Any existing water is drained out
before the door can be opened. Caution, the
washing could still be hot!
Detailed information can be found in the
instructions for use.
The controls can be locked to avoid interference by
children.
1. If the machine is off:
Turn the programme selector knob from the
OFF position “ ” to any programme. Do not
press the “Start/Pause” button . Press the
“Child lock” button for 5 seconds. The “Child
lock” indicator lights up. Turn the programme
selector knob to the OFF position “ ” again.
2. While a programme is running:
Press the “Child lock” button for 5
seconds. The child lock indicator will light up.
Now, in spite of the programme selector knob being
turned, no programme can be started or altered.
However, a running programme can be stopped at
any time (e.g. in an emergency), by turning the
programme selector knob to “ ”. Attempts at
changing during the running programme are signalled
by the lamp of the accidentally chosen programme
flashing. The indicator light for the actual programme
running is on.
To unlock the controls, the machine must either have
a programme running or be in select mode. Press the
“Child lock” button for 5 seconds. The child
lock lamp will go out.
START DELAY
PROGRAMME START
ADD WASHING/DOOR LOCK
PROGRAMME END
CHANGE THE PROGRAMME,
TEMPERATURE, OPTIONS AFTER
PROGRAMME START
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
CHILD LOCK


Product specificaties

Merk: Whirlpool
Categorie: Wasmachine
Model: awm 1000 silver

Heb je hulp nodig?

Als je hulp nodig hebt met Whirlpool awm 1000 silver stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wasmachine Whirlpool

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine

LG

LG WT17BPBK Handleiding

22 November 2024
Bosch

Bosch WAX32M10 Handleiding

22 November 2024
LG

LG F2WV308NEW3 Handleiding

22 November 2024
Bosch

Bosch WAU28S70 Handleiding

22 November 2024
Bosch

Bosch WGA142X2TR Handleiding

22 November 2024
LG

LG WF-79X3 Handleiding

22 November 2024
Edesa

Edesa EWF-7400 X Handleiding

22 November 2024
Smeg

Smeg WN04SEA Handleiding

21 November 2024
Smeg

Smeg WHT814ASIT Handleiding

21 November 2024