Whirlpool ART 9910/A+ SF Handleiding

Whirlpool Koelkast ART 9910/A+ SF

Lees hieronder de 📖 handleiding in het Nederlandse voor Whirlpool ART 9910/A+ SF (4 pagina's) in de categorie Koelkast. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Quick guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT

In order to receive a more complete assistance, please

Before using the appliance carefully read the Safety

Instruction.

PRODUCT DESCRIPTION

FIRST TIME USE

Wait at least two hours, after the installation, before connecting

the appliance to the power supply. Connect the appliance to the

power supply it starts the operation automatically. The ideal storage

temperatures for the food are preset in the factory.

After turning the appliance on, you must wait for 4-6 hours for the

correct storage temperature to be reached for a normally lled

appliance. Position the antibacterial anti-odour lter in the fan as

demonstrated in the lter packaging (if available). If the audible signal

sounds, it means that the temperature alarm has intervened: press the

button to switch o the acoustic alarms.

CONTROL PANEL

1. 2.

1. On/stand-by

2. Refrigerator temperature - Fast cool

6TH SENSE FRESH CONTROL

The appliance is automatically able to quickly reach the optimal

internal preservation temperature. The function enables to control also

the humidity of the appliance. In order for it to function correctly, the

fan must also be turned on. It is possible to turn the function on/o

(see Fan description).

FAN*

The Fan improves temperature distribution inside the product,

allowing better preservation of stored food and reduction of excess

humidity. The fan is switched on by default and can be activate/

deactivate manually. The fan operating mode is adjusted based on

product condition. You can turn the fan on/o by pressing the

and “On/Stand-by” buttons at the same time for 3 seconds. The

lit 6thSense FreshControl symbol indicates that the fan is on and

therefore the 6thSense FreshControl function is on. If the ambient

temperature exceeds 27°C, or if drops of water are present on the

glass shelves, it is essential that the fan is on to ensure the proper

preservation of the food. Deactivation of the fan allows energy

consumption to be optimised.

Note: the fan restarts automatically after a power cut or after turning o

the appliance. Do not obstruct the air intake area with food items.

ANTIBACTERIAL FILTER*

Remove it from the box placed in the Fruit and vegetable drawer and

insert into the cover of fan. The replacement procedure is included in

the lter box.

ON/STAND-BY

Press the button for 3 seconds to turn the appliance o. In

Stand-by mode the light in the refrigerator compartment does not turn

on. Press the button again briey to reactivate the appliance.

Note: this does not disconnect the appliance from the power supply.

REFRIGERATOR COMPARTMENT TEMPERATURE

It is possible to set a dierent temperature with the button.

There are ve possible controls.

• From a less cold temperature (left)

• to a colder temperature (right).

FAST COOL

Press the button for 3 seconds to quickly cool the

refrigerator compartment or 6 hours before putting large quantities of

food to be frozen in the freezing zone. When the function is turned on

the icon lights up.

The function automatically turns o after 30 hours, or manually by

pressing the button again for 3 seconds.

Note: avoid a direct contact between the fresh food and the food that is

already frozen To optimise the freezing speed, drawers can be removed

and the food can be placed directly on the bottom of the compartment.

* Available only on certain models

“0° ZONE” COMPARTMENT*

The “ ” compartment is specically designed to maintain a low 0°ZONE

temperature and the correct humidity to preserve fresh food for longer

(for example, meat, sh, fruits and winter vegetables).

Humidity control technology coupled with Active0 provides the best

food preservation when the food is not completely packed.

TURNING ON AND TURNING OFF THE COMPARTMENT

The internal temperature of the compartment is approximately 0°

when the compartment is turned on.

To turn on the compartment, press the button (1) for more than one

second until the symbol (2) lights up. The lit symbol (2) means that the

compartment is working. Press the button (1) again for more than one

second to turn o the compartment. The temperature inside depends

on the general temperature of the refrigerator.

For the correct functioning of the “ ” compartment, it is 0°ZONE

necessary that:

• the appliance is turned on;

• the fridge temperature is between +2°C and +6°C;

• the “0°ZONE” compartment is turned on

• Vacation Mode and Stand by are not selected

Note:

-if the symbol does not light up when you turn on the compartment,

check that the drawer is properly inserted; if the problem persists

contact the authorised Technical Assistance Service;

-when the “0°ZONE” compartment is inserted in the appliance you

may hear a faint noise, which you should consider as normal;

Important: be careful when positioning food and containers that are

small in size on the upper shelf of the “ “ compartment in order 0°ZONE

to prevent them accidentally falling between the shelf and the back

wall of the refrigerator compartment.

REMOVING THE “0° ZONE“ COMPARTMENT

Carry out the following steps:

1. To make it easier to remove the compartment, we recommend

that you empty (and possibly remove) the lower door shelves.

2. Remove the compartment by rotating it upwards.

3. Remove the white plastic shelf under the compartment.

Note: it is not possible to remove the upper shelf and side supports.

To use the “0° ZONE“ compartment again, carefully reposition the

white plastic shelf under the compartment before inserting the drawer

and turning the function back on.

To have a larger refrigerator volume and to reduce energy

consumption, it is recommended to remove the “ “ 0°ZONE

compartment.

Clean the compartment and its components occasionally using a cloth

and a solution of warm water (taking care not to submerge the white

plastic shelf under the drawer) and neutral cleaning agents specically

for cleaning the inside of the refrigerator. Do not use abrasive cleaning

agents.

Before cleaning the compartment (also externally) it is necessary

to remove the drawer to disconnect the electrical supply.

STOP FROST SYSTEM*

The STOP FROST SYSTEM facilitates the defrost procedure for the

freezer compartment.

The STOP FROST accessory is designed to collect some of the frost

that forms in the freezer compartment and it is easy to remove and

clean, therefore reducing the time needed to defrost the freezer

compartment.

To remove the frost on the STOP FROST accessory follow the cleaning

procedure demonstrated below.

PROCEDURE TO CLEAN THE STOP FROST ACCESSORY

1. Open the freezer compartment door and remove the upper

drawer.

2. Unfasten the STOP FROST accessory and remove it, taking care not

to drop it on the glass shelf below.

Note: if the accessory is jammed or dicult to remove, do not keep

trying to remove it, but proceed with the complete defrost of the freezer

compartment.

3. Close the door of the freezer compartment.

4. Remove the frost on the accessory by rinsing it under running (not

hot) water.

5. Let the accessory drip dry and dry the plastic parts with a soft

cloth.

6. Reinsert the accessory by placing the back part on the projections

shown in gure, then refasten the handle of the accessory to the

clasps above.

7. Reinsert the upper drawer and close the door of the freezer

compartment.

It is possible to clean the STOP FROST accessory on its own without

completely defrosting the freezer compartment.

Cleaning the STOP FROST accessory regularly helps to reduce the need

to completely defrost the freezer compartment.

Note: the product specications, including volume and energy, are

calculated without the STOP FROST accessory.

HOW TO STORE FOOD AND BEVERAGE

***

Legend

TEMPERATE ZONE

Suggested for storage of tropical fruit, cans, drink, eggs,

sauces, pickles, butter, jam

COOL ZONE

Suggested for storage of cheese, milk, daily food,

delicatessen, yoghurt

COOLEST AREA

Suggested for storage of cold cuts, desserts, meat and

sh

FRUIT & VEGETABLE DRAWER

FREEZER DRAWERS

FREEZING ZONE DRAWER

(Max cool zone)

Suggested to freeze fresh/cooked food

** For models with "0 ° ZONE" COMPARTMENT the "coolest area" is the one

highlighted in the legend

*** Only for CB310 e CB380 models (refer to the Rating plate located at side

of Fruit and vegetable drawer)

Product specificaties

Merk:	Whirlpool
Categorie:	Koelkast
Model:	ART 9910/A+ SF
Apparaatplaatsing:	Ingebouwd
Soort bediening:	Touch
Kleur van het product:	Roestvrijstaal
Deurscharnieren:	Rechts
Ingebouwd display:	Ja
Gewicht:	55200 g
Breedte:	540 mm
Diepte:	545 mm
Hoogte:	1935 mm
Netbelasting:	140 W
Snoerlengte:	1.4 m
Geluidsniveau:	35 dB
Jaarlijks energieverbruik:	310 kWu
Gewicht verpakking:	57000 g
Breedte verpakking:	580 mm
Diepte verpakking:	608 mm
Hoogte verpakking:	2000 mm
Energie-efficiëntieklasse (oud):	A+
Nettocapaciteit vriezer:	79 l
Vriescapaciteit:	3.5 kg/24u
Draairichting deur verwisselbaar:	Ja
Geschikt voor paneelaanpassing:	Nee
Nettocapaciteit koelkast:	222 l
Brutocapaciteit koelkast:	228 l
No Frost (koelkast):	Ja
Koelkast binnenverlichting:	Ja
Soort lamp:	LED
Aantal planken koelkast:	4
Aantal groente lades:	1
Vriezer positie:	Onder
Bewaartijd bij stroomuitval:	19 uur
Snelvriesfunctie:	Ja
Aantal planken vriezer:	3
Aantal sterren:	4*
Totale nettocapaciteit:	301 l
Flessenrek:	Ja
Automatisch ontdooien (koelkast):	Ja
Totale brutocapaciteit:	307 l
Installatie compartiment breedte:	560 mm
Installatie compartiment diepte:	560 mm
Installatie compartiment hoogte:	1940 mm
Plankmateriaal:	Gehard glas
Super Cool functie:	Ja
Koelkastdeurvakken:	4
Vers zone compartiment:	Ja
Stroom:	16 A
Aantal compressoren:	1
Aantal uitneembare platen:	3
Minimum operationele temperatuur:	10 °C
Maximale temperatuur (in bedrijf):	43 °C
Klimaatklasse:	SN-T
Koelsysteem:	Geventileerd
AC-ingangsspanning:	220 - 240 V
AC-ingangsfrequentie:	50 Hz