Whirlpool ART 6711 SF2 Handleiding

Whirlpool Koelkast ART 6711 SF2

Lees hieronder de 📖 handleiding in het Nederlandse voor Whirlpool ART 6711 SF2 (3 pagina's) in de categorie Koelkast. Deze handleiding was nuttig voor 125 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

Quick guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT

In order to receive a more complete assistance, please

Before using the appliance carefully read the Safety

Instruction.

PRODUCT DESCRIPTION

FIRST TIME USE

Wait at least two hours, after the installation, before connecting

the appliance to the power supply. Connect the appliance to the

power supply it starts the operation automatically. The ideal storage

temperatures for the food are preset in the factory.

After turning the appliance on, you must wait for 4-6 hours for the

correct storage temperature to be reached for a normally lled

appliance. Position the antibacterial anti-odour lter in the fan as

demonstrated in the lter packaging (if available). If the audible signal

sounds, it means that the temperature alarm has intervened: press the

button to switch o the acoustic alarms.

CONTROL PANEL

1. LED Light

2. On/Stand-by

3. Freezer and refrigerator compartment

temperature

6TH SENSE FRESH CONTROL

The appliance is automatically able to quickly reach the optimal

internal preservation temperature. The function enables to control also

the humidity of the appliance. In order for it to function correctly, the

fan must also be turned on. It is possible to turn the function on/o

(see Fan description).

ON/STAND-BY

Press the button for 3 seconds to turn the appliance o. In

Stand-by mode the light in the refrigerator compartment does not turn

on. Press the button again briey to reactivate the appliance.

Note: this does not disconnect the appliance from the power supply.

FREEZER AND REFRIGERATOR

COMPARTMENT TEMPERATURE

The three LED indicators indicate the refrigerator compartment set

temperature.

It is possible to set a dierent temperature of the appliance with the

button.

The following adjustments are possible:

LEDs lit Set temperature

High (less cold)

Medium-high

Medium

Medium-low

Low (colder)

Fast cool

FAN*

The Fan is pre-set to ON. You can turn the Fan on/o by pressing the

light button (as shown in gure 2) and at the same time the button

as shown in gure 3. The light will ash just once if the Fan is OFF, or it

will ash 3 times if the Fan in ON. If the ambient temperature exceeds

27°C, or if drops of water are present on the glass shelves, it is essential

that the fan is on to ensure the proper preservation of the food.

Deactivation of the fan allows energy consumption to be optimised.

1 2 3

FAST COOL FUNCTION (FAST COOLING)

To quickly cool the refrigerator compartment, or

6 hours before putting a large quantity of food

to be frozen in the freezer compartment, turn

on the “Fast Cooling” function by repeatedly

pressing the button until the 3 icons ash

green and then stay constant.

The function automatically turns o after 30 hours and the

temperature returns to the previous setting when the function is

turned on.

To turn the function o manually, press the button.

Note: avoid a direct contact between the fresh food and the food that is

already frozen.

To optimize the freezing speed, the lower drawer can be removed and

the food can be placed directly on the bottom of the compartment.

* Available only on certain models

STOP FROST SYSTEM*

The STOP FROST SYSTEM facilitates the defrost procedure for the

freezer compartment.

The STOP FROST accessory is designed to collect some of the frost

that forms in the freezer compartment and it is easy to remove and

clean, therefore reducing the time needed to defrost the freezer

compartment.

To remove the frost on the STOP FROST accessory follow the cleaning

procedure demonstrated below.

PROCEDURE TO CLEAN THE STOP FROST ACCESSORY

1. Open the freezer compartment door and remove the upper

drawer.

2. Unfasten the STOP FROST accessory and remove it, taking care not

to drop it on the glass shelf below.

Note: if the accessory is jammed or dicult to remove, do not keep

trying to remove it, but proceed with the complete defrost of the freezer

compartment.

3. Close the door of the freezer compartment.

4. Remove the frost on the accessory by rinsing it under running (not

hot) water.

5. Let the accessory drip dry and dry the plastic parts with a soft

cloth.

6. Reinsert the accessory by placing the back part on the projections

shown in gure, then refasten the handle of the accessory to the

clasps above.

7. Reinsert the upper drawer and close the door of the freezer

compartment.

It is possible to clean the STOP FROST accessory on its own without

completely defrosting the freezer compartment.

Cleaning the STOP FROST accessory regularly helps to reduce the need

to completely defrost the freezer compartment.

Note: the product specications, including volume and energy, are

calculated without the STOP FROST accessory.

HOW TO STORE FOOD AND BEVERAGE

***

Legend

TEMPERATE ZONE

Suggested for storage of tropical fruit, cans, drink, eggs,

sauces, pickles, butter, jam

COOL ZONE

Suggested for storage of cheese, milk, daily food,

delicatessen, yoghurt

COOLEST AREA

Suggested for storage of cold cuts, desserts, meat and

sh

FRUIT & VEGETABLE DRAWER

FREEZER DRAWERS

FREEZING ZONE DRAWER

(Max cool zone)

Suggested to freeze fresh/cooked food

** For models with "0 ° ZONE" COMPARTMENT the "coolest area" is the one

highlighted in the legend

*** Only for CB310 e CB380 models (refer to the Rating plate located at side

of Fruit and vegetable drawer)

400011189096

You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:

• Visiting our website docs . whirlpool . eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product's identication plate.

TROUBLESHOOTING

What to do if... Possible reasons Solutions

The control panel is

switched o, the appliance

does not work.

There may be an appliance power

supply problem.

Check that:

• there is not a power outage;

• the plug is properly inserted in the socket and any bipolar power

switch is in the correct position (this enables the power supply to

the appliance);

• the household electrical system protection devices are ecient;

• the power cable is not damaged.

The appliance could be in On/stand by

mode. Turn the appliance on by briey pressing the button (see On/Stand-

by function).

The inside light does not

work.

The light may need to be replace.

Malfunction of a technical component.

Disconnect the appliance from the power supply and contact the

Technical Assistance Service if you need a replacement.

The inside light ashes. Door alarm active.

It is activated when the refrigerator

compartment door remains open for a

prolonged period of time.

To stop the alarm, close the refrigerator door.

On reopening the door, check the light works.

The temperature inside the

compartments is not low

enough.

There could be various causes (see

“Solutions”).

Check that:

• the doors close properly;

• the appliance is not installed near a heat source;

• the set temperature is adequate;

• the circulation of air through the vents at the bottom of the

appliance is not obstructed (see installation section).

There is water on the

bottom of the refrigerator

compartment.

The defrost water drain is blocked. Clean the defrosting water drain (see section “Cleaning and

Maintenance").

Excessive amount of frost in

the freezer compartment.

The door to the freezer compartment is

not closed properly.

Check that there is nothing preventing the door from closing properly.

• Defrost the freezer compartment.

• Make sure the appliance has been correctly installed.

The front edge of the

appliance that the door

gaskets seal against is hot.

This is not a defect. It prevents

condensation from forming.

No solution is necessary.

One or more green symbols

are ashing continuously

and it is not possible to

change the temperature set.

Malfunction alarm.

The alarm indicates a fault in a technical

component.

Contact Technical Assistance Service.

The temperature of the

refrigerator compartment is

too cold.

• The set temperature is too cold.

• A large amount of fresh food may

have been placed in the freezer

compartment.

• Try to set a less cold temperature.

• If fresh food has been placed in the freezer compartment, wait

until it has fully frozen.

• Turn o the fan (if present) following the procedure described in

the paragraph “FAN”.

Product specificaties

Merk:	Whirlpool
Categorie:	Koelkast
Model:	ART 6711 SF2
Apparaatplaatsing:	Vrijstaand
Kleur van het product:	Wit
Deurscharnieren:	Rechts
Breedte:	540 mm
Diepte:	545 mm
Hoogte:	1770 mm
Netbelasting:	140 W
Snoerlengte:	2.45 m
Kinderslot:	Ja
Geluidsniveau:	35 dB
Energie-efficiëntieklasse:	E
Jaarlijks energieverbruik:	226 kWu
Brutocapaciteit vriezer:	79 l
Nettocapaciteit vriezer:	79 l
Vriescapaciteit:	4 kg/24u
Draairichting deur verwisselbaar:	Nee
Nettocapaciteit koelkast:	194 l
Brutocapaciteit koelkast:	195 l
Koelkast binnenverlichting:	Ja
Aantal planken koelkast:	5
Vriezer positie:	Onder
No Frost (vriezer):	Nee
Bewaartijd bij stroomuitval:	9 uur
Snelvriesfunctie:	Nee
Aantal planken vriezer:	3
Aantal sterren:	4*
Totale nettocapaciteit:	273 l
Temperatuur alarm:	Ja
Flessenrek:	Ja
Automatisch ontdooien (koelkast):	Ja
Installatie compartiment diepte:	560 mm
Super Cool functie:	Ja
Vers zone compartiment:	Ja
Deur open alarm:	Ja
Stroom:	16 A
Installatie compartiment hoogte (min):	1776 mm
Aantal uitneembare platen:	4
Automatische ontdooiing ( diepvries ):	Nee
Installatiecompartiment breedte (min):	560 mm
Stroomuitvalmelder:	Ja
Foutmelding:	Nee
Elektronische regeling:	Ja
Ventilatie:	Ja
Energie-efficiëntieschaal:	A tot G