Whirlpool AKM 613/IX Handleiding

Whirlpool Fornuis AKM 613/IX

Lees hieronder de 📖 handleiding in het Nederlandse voor Whirlpool AKM 613/IX (4 pagina's) in de categorie Fornuis. Deze handleiding was nuttig voor 88 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

AKM 613 HOB INSTRUCTIONS

GB IE

5019 319 62072 To get full satisfaction from the hob, please read these instructions carefully and keep them for future consultation. Whirlpool is a registered trademark of Whirlpool USA

• To use the hob, turn the knob(s) clockwise and set

it/them to the required power.

• To turn the hob off, turn the knob(s) back to position

“0”.

• The hob is fitted with residual heat indicators. These

light up when the cooking zones reach temperatures

that could cause burns. These indicators remains alight

after the cooking zones are switched off, and turn off

only when the zones are no longer hot enough to be

dangerous.

Important:

To avoid permanently damaging the glass-ceramic top,

do not use:

- Pots with bottoms that are not perfectly flat.

- Metal pots with enamelled bottom.

DIMENSIONS OF THE COOKTOP AND WORKTOP (mm)

1. Radiant cooking zone Ø 145

2. Radiant cooking zone Ø 180

3. Radiant cooking zone Ø 145

4. Radiant cooking zone Ø 180

5. Residual heat indicator

6. Rear right cooking zone control knob

7. Rear left cooking zone control knob

8. Front left cooking zone control knob

9. Front right cooking zone control knob

ELECTRICAL CONNECTION

Supply voltage Conductors

(number and size)

230 V ~ 3 X 2.5 mm2

Make sure that the voltage indicated on the rating

plate is the same as the mains voltage. Technical

data is given on the rating plate on the edge of the

hob and also below:

Type PLEVS 230 V - 50 Hz 5,3 kW

PROTECTING THE ENVIRONMENT

Disposal of packaging materials

• The packing material can all be fully recycled, as

confirmed by the recycling symbol .

• The various parts of the packing must not be sent for

waste, but recycled in conformity with the regulations

imposed by local authorities.

Disposal of used household appliances

• This appliance is marked according to the European

directive 2002/96/EC on Waste Electrical and

Electronic Equipment (WEEE). By ensuring this product

is disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by

inappropriate waste handling of this product.

The symbol on the product, or on the documents

accompanying the product, indicates that this appliance

may not be treated as household waste. Instead it shall

be handed over to the applicable collection point for

the recycling of electrical and electronic equipment.

Disposal must be carried out in accordance with local

environmental regulations for waste disposal. For more

detailed information about treatment, recovery and

recycling of this product, please contact your local city

office, your household waste disposal service or the

shop where you purchased the product.

Energy saving

• Use pots and pans whose bottom diameter is equal to

that of the cooker plates, or slightly larger.

• Only use flat-bottomed pots and pans.

• If possible, keep the pot covered when cooking.

• Cook vegetables, potatoes, etc. with little water in

order to cut down cooking time.

• A pressure cooker allows you to save even more

energy and time.

CAUTION

• Should the hob become cracked or broken, do not use

it and call the After Sales Service immediately.

• If the hob incorporates halogen cooking elements, do

not stare at them.

• The hob is designed for use as a domestic food cooker

only. No other type of use is allowed. The Manufacturer

declines all responsibility for inappropriate use or

incorrect setting of the controls.

• Do not expose the hob to atmospheric agents.

• Any repairs or adjustments must be carried out

exclusively by an authorised technician.

• Avoid touching the hob with wet hands or using it when

barefoot.

•Do not allow children to touch:

- the hob in general, to avoid burns.

During and immediately after use the hob reaches

extremely high temperatures;

- packing materials (bags, polystyrene, metal parts, etc.);

- the hob to be scrapped.

• Make sure that the electrical wires of other electrical

appliances near the hob do not come into contact with

hot parts of the hob itself.

• Always keep a watch on pans when cooking with oil

and grease. The oil and grease might overheat and

catch fire!

• Do not use the hob as a support or worktop.

• Do not leave the hot plates/cookers turned on when

they are empty.

• Do not rest plastic, aluminium foil, cloths, paper etc. on

the hot plates/cookers.

• The hob is fitted with hot plates/cookers of different

sizes. Use pans whose bottom diameter is equal to that

of the hot plates/cookers, or slightly larger.

BEFORE USING THE COOKING HOB

Before use, remove:

- adhesives stuck on the hob;

- cardboard guards and protective plastic film;

- check whether the hob has been damaged during

transport. If in doubt, contact the After Sales Service.

ACCESSORY

Child guard AMH 122

This accessory can be obtained from

the After Sales Service under code

number 4819 310 18436 or from your

dealer under reference number

017124.

Care and maintenance

Important: never clean the appliance with high pressure

water or steam cleaning equipment.

• Clean the hob, when it is cool, after each use. This will

prevent the build-up of dirt and make cleaning easier.

• Use a clean cloth, absorbent kitchen wipes and washing

up liquid or a specific glass ceramic cleaner.

• Remove baked-on dirt with the special scraper tool

(if provided) and specific cleaning products.

• Any food spills should be cleaned off before they dry.

• Do not use abrasive products, chlorine-based cleaners,

oven-cleaner spray or pan scourers.

• The hob should be treated periodically with specific

products available from the shops, following the

manufacturer's instructions.

Telescopic knobs (depending on model)

• The knobs can be lifted approx. 1 cm for cleaning.

• After cleaning, restore the knob to its original position.

TROUBLESHOOTING GUIDE

The hob does not work:

- Make sure that the power supply is on.

- Turn the hob off and on again, to make sure that the

problem has been solved.

- Make sure that the knob is not turned to “0”.

Turn the multi-pole switch to

“Off” for a few minutes

and then turn it back to “On”.

The hob will not switch off:

- disconnect the hob immediately from the power

supply.

AFTER SALES SERVICE

Before you call the After Sales Service

• Make sure that you cannot solve the problem yourself

following the points described in chapter

“Troubleshooting Guide“.

If after the above checks the fault still occurs, get in

touch with the nearest After Sales Service.

Please give:

• a short description of the fault;

• the exact type and model of hob;

• service number (i.e., the number that follows the word

SERVICE on the rating plate under the hob itself). The

service number is also indicated on the guarantee

booklet;

• your full address;

• your telephone number.

If any repairs are required, please contact an authorised

After Sales Service (to guarantee that original spare parts

will be used and repairs carried out correctly).

Failure to comply with these instructions may

compromise the safety and quality of the product.

INSTALLATION

Recommendations

Important: Disconnect the hob from the mains before

carrying out any installation work or servicing.

• All electrical connections must be made before

connecting the appliance to the power supply.

• Installation must be carried out by a qualified technician

in accordance with the manufacturer's instructions and

in compliance with local regulations.

• Unpack the hob and make sure that the appliance has

not been damaged during transport. If you are not

sure contact the dealer or the nearest service

centre.

Preparing the housing unit

• Cut the worktop to fit before installing the appliance.

Carefully remove any shavings or sawdust that could

prevent the appliance from running properly.

Attention: to install the hob on other surfaces than wood

(marble, plastic, ceramic, marble, stone, etc.) remember to

ask After Sales Service for the fixing plates (fig. 2) Code 4819

404 78697.

• The hob must be fitted in a worktop with a minimum

thickness of 20 mm and a maximum of 50 mm.

• Insert a separator panel at a minimum distance of

90 mm from the bottom of the hob, so that it cannot be

accessed by the user.

• If there is an oven under the hob, make sure that it is

manufactured by us and equipped with a cooling

system.

• There must be nothing between the hob and the oven

(e.g. cables, insulating material, etc.).

• An adjacent column unit must be installed at least

100 mm from the edge of the hob.

• Cut an opening in the worktop of the given dimensions.

• We recommend you seal the internal edges of the

worktop with wood glue or silicone.

• If not already in place, apply the supplied seal to the

hob, after cleaning the adhesive surface thoroughly.

Glass-ceramic hob

Important: remove any protective film before installing

the hob.

Make sure that that the opening in the worktop for the hob is

cut according to the dimensions given in the drawing, paying

attention to the tolerance range.

The hob should not be forced into the worktop. Forcing the

glass-ceramic top may cause it to crack (even at a later date)!

•If the worktop is made of wood, use the spring clips

and screws provided.

1. Secure the spring clips (A) (fig. 1) with the screws

provided (B) (fig. 1) as shown, paying attention to the

specified distances.

2. Fit the hob into the worktop.

•If the worktop is made of marble, plastic, ceramic,

stone, etc., the hob must be secured with special

brackets (C) (fig. 2).

1. Fit the hob into the worktop (fig. 1).

2. Place the 4 brackets (C)

in position in accordance with the

thickness of the worktop as shown in fig. 2.

3. Fasten the 4 screws (D) in the positions (E) (fig. 2).

Electrical connection

• Regulations require that the appliance be earthed.

• Connection to the mains must be carried out by a

qualified technician in accordance with the

manufacturer's instructions and in compliance with local

regulations.

• The installer is responsible for connecting appliances

correctly to the mains and for observing the safety

regulations.

• The oven power cable must be long enough to connect

the built-in appliance to the mains.

• Observance of safety directives requires that a multi-

pole switch with a minimum contact gap of 3 mm be

used for the installation.

• Do not use multiple plug adapters or extension leads.

• After the oven has been installed, the electrical

components must be inaccessible.

Connecting the oven to the power supply

Note: the yellow/green earth wire must be connected to the

screw with the symbol .

• Strip approx. 70 mm of the cable sheath from the

power supply cable (G).

• Strip approx. 10 mm of sheath from the conductors.

Insert the cable (G) through the opening in the lid (F).

• Insert the cable into the cable clamp and connect the

conductors to the terminal block as indicated in the

diagram printed on the lid.

• Secure the power cable (G) by means of the cable

clamp.

• Refit the protection lid

(F).

• After the electrical connection, fit the hob from the top

and hook it to the fixing springs, according to the

illustration.

Declaration of conformity

• This hob is suitable for contact with foodstuffs, and

complies with EEC Directive 89/109.

• This hob (Class Y) has been designed to be used only

for cooking. Any other use (such as heating a room) is

improper and dangerous.

• This hob has been designed, constructed and marketed

in compliance with:

- safety requirements of EEC Directive “Low voltage”

73/23;

- protection requirements of EEC Directive

“EMC” 89/336;

- requirements of EEC Directive 93/68.

The Manufacturer reserves the right to change product

specifications without prior notice.

Fig. 1

Fig. 2 Fig. 3

Product specificaties

Merk:	Whirlpool
Categorie:	Fornuis
Model:	AKM 613/IX
Apparaatplaatsing:	Ingebouwd
Soort bediening:	Draaiknop
Kleur van het product:	Zwart
Ingebouwd display:	Nee
Gewicht:	8000 g
Breedte:	580 mm
Diepte:	510 mm
Hoogte:	50 mm
Gewicht verpakking:	11000 g
Breedte verpakking:	680 mm
Diepte verpakking:	590 mm
Hoogte verpakking:	140 mm
Aantal branders/kookzones:	4 zone(s)
Type kookplaat:	Keramisch
Type brander/kookzone 1:	Regulier
Type brander/kookzone 2:	Groot
Type brander/kookzone 3:	Regulier
Aantal gaspitten:	0 zone(s)
Aantal elektronische kook zones:	4 zone(s)
Normale brander/kookzone:	- W
Controle positie:	Rechtsboven
Stroom:	24.7 A
Restwarmte-indicator:	Ja
Extra grote hoge-snelheid kookzone:	5800 W
Frame kleur:	Zwart
Type brander/kookzone 4:	Groot
Voedingsbron brander/kookzone 1:	Electrisch
Voedingsbron brander/kookzone 2:	Electrisch
Voedingsbron brander/kookzone 3:	Electrisch
Voedingsbron brander/kookzone 4:	Electrisch
Positie brander/kookzone 1:	Links voor
Diameter brander/kookzone 1:	145 mm
Positie brander/kookzone 2:	Links achter
Diameter brander/kookzone 2:	180 mm
Positie brander/kookzone 3:	Rechts achter
Diameter brander/kookzone 3:	145 mm
Positie brander/kookzone 4:	Rechts voor
Diameter brander/kookzone 4:	180 mm
Kookzone 1 vorm:	Rond
Kookzone 2 vorm:	Rond
Kookzone 3 vorm:	Rond
Kookzone 4 vorm:	Rond